ErisTerminal® SIP Deskset VSP726 Quick Start Guide
Important Safety Information This symbol is to alert you to important operating or servicing instructions that may appear on the product or in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1.
12. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension cords. 14.
19. Use only the power cord indicated in this manual. 20. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 21. In wall mounting position, make sure to mount the telephone base on the wall by aligning the eyelets with the mounting studs of the wall plate. Then slide the telephone base down on both mounting studs until it locks into place. Refer to the full instructions in Deskset Installation in the User Guide. 22.
For cETL compliance only Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation. Respectez toujours les mesures de sécurité et de sécurité de base lorsque vous utilisez ce produit, afin de réduire les risques de blessures, d’incendie, ou d’électrocution.
12. Afin de réduire les risques d’électrocution, ne démontez pas l’appareil, mais apportez-le plutôt à un centre de service qualifié s’il doit être réparé. En enlevant le couvercle, vous vous exposez à des tensions dangereuses ou autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une électrocution lors d’une utilisation ultérieure de l’appareil. 13. Ne surchargez pas les prises de courant ni les rallonges électriques, car ceci peut constituer un risque d’incendie ou d’électrocution.
21. En position de montage mural, assurez-vous de monter le socle du téléphone sur le mur en alignant les oeillets avec les goujons de fixation de la plaque murale. Ensuite, faites glisser le socle vers le bas sur les deux goujons de fixation jusqu’à ce qu’il se verrouille en place. Reportez-vous aux instructions complètes dans la section Installation dans ce guide d’utilisation. 22. MISE EN GARDE : Éloignez les petits objets métalliques tels que les broches de l’écouteur du combiné.
Compliance FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
About this Guide This quick start guide provides a reference for the external features of the phone and basic installation instructions. Please refer to the VSP726 Deskset User Guide for complete installation and operation instructions. You can download the guide from businessphones.vtech.com. For customer service or product information, visit our website at businessphones.vtech.com or call 1 (888) 370-2006. Parts Checklist Your telephone package contains the following items.
Quick Reference Guide External Features MESSAGE WAITING indicator Flashes when you have a new voice message. Programmable keys Can be programmed to perform various functions or access various features. For example: • Press to access a line to make a call. • Press to dial a monitored extension or a quick-dial number. • Press to answer a ringing call on any line or monitored extension. Key label card To write on the key label card, pull out the card from under the plastic cover.
Quick Reference Guide Screen and Navigation Controls SCREEN Displays call information, soft key labels, and deskset menus. SOFT KEYS Perform the actions indicated by the on-screen labels. CANCEL While in a menu, press to cancel an operation and exit the menu. SELECT Press to select a menu item. MENU Press to display the deskset menu. HOLD Press to put a call on hold. NAVIGATION KEY While in menus, press q or p to scroll through the menu, highlight items or change settings.
Quick Reference Guide Back Panel Features Micro SD card slot Deskset stand slots Wall mounting slots Ethernet port PC port Power jack Handset jack Corded headset jack 12
Deskset Installation This section assumes that your network infrastructure is established and that your IP PBX phone service has been ordered and configured for your location. For more information about installation options and phone setup, see the VSP726 Deskset User Guide and the VSP726 Deskset Administrator and Provisioning Manual, available at businessphones.vtech.com. You can power the phone using a compatible VTech power adapter or using Power over Ethernet (PoE) from your network.
Handset jack Slot and tab 3. Plug one end of the Ethernet cable into the Ethernet port on the rear of the deskset (marked by ), and plug the other end of the cable into your network router or switch. If the deskset is not using power from a PoE-capable network router or switch: a. Connect a compatible VTech power adapter to the deskset power jack. b. Plug the power adapter into an electrical outlet that is not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only a compatible VTech power adapter.
Maintenance Taking care of your telephone • Your telephone base contains sophisticated electronic parts, so you must treat it with care. • Avoid rough treatment. • Place the corded handset down gently. • Save the original packing materials to protect your telephone base if you ever need to ship it. Avoid water • You can damage your telephone base if it gets wet. Do not use the corded handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
VTECH COMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008. VTech is a registered trademark of VTech Holdings Limited. ErisTerminal® is a registered trademark of VTech Communications Inc. Specifications are subject to change without notice. Copyright © 2015 for VTECH COMMUNICATIONS LTD. All rights reserved. Printed in China.