User Manual

- 01 - - 02 - - 03 - - 04 - - 05 -
- 10 - - 11 - - 12 - - 13 -
- 06 -
- 07 - - 08 - - 09 -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Meaning
Icon
Meaning
Icon
Menu / Back
Move up
Move down/Display switch
OK / REC / Play / Pause
Card slot
Rear camera port
Power port
Front camera port
GPS tracker (optional)
Front camera extension cable
Front camera
Split cable
Wired remote (optional)
LED indicator
Emergency button
Power module
Rear camera
Rear camera extension cable
Backside of main unit
Magnetic sucker holder
3.2 Status Icons
3.3 Optional Accessories
Wired Remote
1) Short press any button of wired remote to activate the manual
emergency mode and save a video file named ''Key 001 002
003….''which won't be overwritten.
2) Indicate the camera status:
LED Light Frequency Status
0.5 s
Recording properly
0.1 s
Emergency mode
0 s (light on) Standby mode
Off (light off) Power off
GPS Tracker
1) The GPS data (coordinate, speed, route) will be saved as a file
named ''XXXXX. NMEA'' if you connected a GPS tracker with the
dash cam and received GPS signal successfully (check the GPS
track status in menu settings).
2) The GPS route and speed will be displayed on Google map when
you playback the video in our GPS player.
3) You can input the GPS files to display GPS track information with
rd
a 3 party software which supports GPS data input.
GPS Player Edited Video (with GPS data)
Tips:
1. Please fix the GPS module exterior and don't put it in a metal case or
interior.
2. It costs a few minutes to receive the GPS signal at first connection.
The weather and environment like indoor, high buildings will affect the GPS
signal.
3. The GPS player is supported on Windows platform only.
You can download the GPS player from official website or contact seller to
get it.
Screen
P6/P6F: 2.0 TFT , 960 X 240
P6L/P6FL: No screen
Model
P6/P6L/P6F/P6FL
Processor
Mstar MSC8328 (MTK)
Front: 1920*1080
Rear: 1280*720
Resolution (P6/P6L)
Front: 1920*1080
Rear: 1920*1080
Resolution
(P6F/P6FL)
Video frame rates
30fps
Lens
6-layer all glass
Waterproof level
IP67(lens) / IP65(main body and other accessories)
Collision G-Sensor
Three-axis stereo collision detection
Loop recording
Support (Off/1min/2min/3min/5min)
Wi-Fi
Support
Microphone
Built-in
Speaker
Built-in
Video format
MOV (H.264)
Memory card
TF Card Up to 128GB
Video stamp
Date & Time
English/French/Deutsch/Italian/Spanish/
Portuguese/ Russian/Turkish/Korean/Japanese...
Language
15%~60% RH
Operating humidity
0~60 °C
Operating temperature
Super Capacitor + RTC
Battery capacity
INPUT :DC 12-24V ; OUTPUT : DC 5V 2A
Power supply
Note: Specifications are subject to change without notice.
6 OPERATION
6.1 Video Recording
1) Normal Video Mode
It starts video recording automatically when the engine starts, the
LED indicator of wired remote will flash slowly. Stop recording
automatically when power off (still keep recording around 3 minutes
for smart power cable), and you can also press the ‘OK’ button to
stop recording manually (P6L/P6FL doesn’t support).
Loop on (by default): Loop recording mode continuously records
videos to create footage of an assigned length of time (default
setting: 3 minutes). If the memory reaches the maximum, then the
oldest footage will be deleted to store the most recent footage.
Set the video clip time through monitor or APP configuration.
Loop off: It records as 30 minutes per clip for both front and rear
camera without overwriting until the memory reaches maximum and
then stop.
NOTE: You can't record videos without a micro SD card.
2) Emergency Video Mode
G-Sensor Event Recording: It will automatically activate
emergency recording mode when detecting a collision. The LED
indicator of wired remote will flash quickly.
It will save a video file named ‘’GSR 001 002 003….’’.
Manual Event Recording: Press the emergency button of wired
remote during the recording to manually activate emergency
recording mode. The LED indicator of wired remote will flash quickly.
It will save a video file named ‘’KEY 001 002 003….’’.
NOTE: Video files recorded in emergency mode are protected from being
overwritten.
6.2 System Setup (P6L/P6FL doesn’t support)
Press the ‘OK’ button to stop recording (enter standby mode) before
setup the system, and press the ‘Menu’ button to enter the menu
system.
Video Mode Playback Mode
Menu Settings Language Settings
1) Press (Up/Down) to select different options.
2) Press to confirm the options or settings.
3) Press to enter the menu or quit menu settings.
MOD E
OK
MEN U
Menu Setting Tree
Refer to the table below for details on menu setting items and
available menu setting options.
GPS status Display GPS status Display GPS status
Time zone select
Select the corresponding
time zone
Use GPS to set the time zone
Reset setup Yes/No Reset all settings
Wi-Fi mode On/Off Set Wi-Fi status
Format SD-card Yes/No Delete all data in the card
SD card info
Display remaining
recording time
Display remaining
recording time
FW version
Check the firmware version
Check the firmware version
NOTE: Settings may change without prior notice.
Item
Select
Description
Video resolution
1080P 30fps/720P 30fps/
720P 60fps
Set resolution
Video clip time Off/1/2/3/5min Set loop recording time
Sound record On/Off Set the sound mode
Beep Set the sound mode
Voice guide On/Off Set voice prompt
Clock settings Date & time Setting date & time
Date format
None / YYYY MM DD /
MM DD YYYY/ DD MM YYYY
Set date format
Flicker
50Hz/60Hz
Set light frequency
R-Cam mirror
On/Off
Set reverse L/R image for
rear camera
On/Off
6.3 Playback
1) Playback on mobile device
Wi-Fi: Connect to your DVR with Wi-Fi APP (Android & iOS), you can
easily play back videos through your mobile device.
OTG: Plug the micro SD card into your mobile device with an OTG
card reader (need your mobile device support OTG). You will find
FRONT and REAR video file folder when you access the memory
card and then select the video you want to play.
2) Playback on Monitor
(P6L/P6FL doesn’t support)
In playback mode, press ‘Up/Down’ to select the video file, and then
press ‘OK’ button to play/stop the video you choose.
3) Playback on PC
Plug the micro SD card into an available USB port on your PC with a
USB card reader. You will find FRONT and REAR video file folder
when you access the memory card and then select the video you
want to play.
You can get some information from the video file name:
“REC” means normal video file.
“KEY” means file recorded by pressing controller.
“GSR” means file recorded by triggering G-sensor.
“170809” means date 9th August, 2017.
“163256” means time 16 o’clock 32 minutes 56 seconds.
“F” means front camera video file.
“MOV” means video file format.
“KEY” and “GSR” file won’t be overwritten in normal loop recording.
6.4 Wi-Fi Connection & Operation
When successfully connected with the camera through Wi-Fi app,
you can review, playback and download the recorded videos on your
smartphone. You can also set up and manage the camera via Wi-Fi
app.
1) Scan the QR code below to download the App from Google Play
and App Store.
2) Select ‘MotoDV_P6’ from available Wi-Fi network to connect. The
default password is ’1234567890’.
3) The dash cam will stop recording when you open Wi-Fi App (
connected successfully) during the recording, and it will restart
recording automatically after 30 seconds when there is no any
operation of the APP or you exit the application. And you can also
start/stop recording manually in the applicaiton.
Click to stop recording manually. Click to start recording
manually. Click to take a photo.
Click to switch front and rear camera. Click to enter/exit full
screen view.
Click to go back to the previous menu.
NOTE:
1) GST Off means the G-sensor is turned off; GST LEVEL4 is the most
sensitive level.
2) When you connect the camera failed, please make sure your mobile
device is in the Wi-Fi range (<5 meters) and connected the correct Wi-Fi
successfully, and then you can turn off the cellular network to try again.
3) Contact seller if it encounters an error when setting the SSID.
- 14 -
1 INTRODUCTION
Thank you for choosing our 2CH motorcycle dash cam system. This
device is specially designed for motorcycles, aimed to simplify the
use of cameras, for security, and pleasure. With the dual dash cam
system, you can easily record high-resolution videos of your ride
from 2 viewpoints. Install and forget it, just enjoy your ride!
Product Features
● Separate dual cameras
● Full HD high resolution
● Voice prompts
● Built-in Wi-Fi module (Support Android & iOS)
● Support loop recording
● Support emergency mode
● Support maximum 128G micro SD card
● Super capacitor design instead of Li-ion battery
● Continuous uninterrupted power supply
● Automatic power on and off
● Full body waterproof design
● Support GPS track (optional)
2 PACKAGE CONTENTS
Main unit (1)
Waterproof cameras (2)
2.0 meters camera extension cable (2)
Power cable (1)
Magnetic sucker holder (1)
USB test cable (1)
3 CAMERA OVERVIEW
3.1 Structure
4 SPECIFICATIONS
5.3 Powering On and Off
The dash cam will automatically power on once the ignition switch is
on, and start recording when there is a TF card inserted (need to
start the engine for smart power cable) It will automatically power off
and stop recording once the bike is not being used (still keep
recording about 3 minutes for smart power cable).
NOTE:
1. When you get the ACC power cable, please must connect the yellow wire
to 12V ACC port of your motorcycle (KEY ignition)
2. The smart power cable is connected to the motorcycle battery directly. It
works by detecting the voltage change and continuous vibration.
5.4 Voice Prompt ( P6/P6F doesn’t support)
When you power on the dash cam and start recording, you will hear a
voice prompt indicating the recording is on; and when you stop the
recording you will hear a voice prompt indicating the recording is off.
5.5 Reverse L/R (R-Cam)
(P6L/P6FL doesn’t support)
You can set the reverse mirror image for the rear camera in the menu
settings.
OFF: Rear video clips (recorded into SD card) and live view (monitor
/App) show correct left/right side.
ON: Rear video clips (recorded into SD card) and live view (monitor
/App) show mirror left/right side.
5.6 Switch Display Mode
(P6L/P6FL doesn’t support)
Press in standby mode/video mode to switch different display
(front,rear,1:1,PIP).
7 WARRANTY & SUPPORT
7.1 Warranty
We provide customers with a warranty of 12 MONTHS from the date
of purchase. Please visit our official website for details.
7.2 FAQ
There may be some information not fully covered on our user
manual, take a look at our FAQ page which may have the answers to
your questions.
7.3 Your Opinion Matters
Our products are designed to do amazing things.
We constantly optimize and strive for excellence to make driving
safer, and more fun. Share your product experience and story with
us to inspire someone else.
If you have any thoughts on how we can do even better, we welcome
your constructive feedback and suggestions.
7.4 Support
If you have any questions regarding your product, please do not
hesitate to contact us, please contact us by below ways.
Please include your order number and product model number.
Email : [e-mail]
Faceb ook: https://www.facebook.com/szvsys/
Twit ter: https://twitter.com/vsysto
YouTub e: https://www.youtube.com/c/szvsys
30P
FHD
Meaning
Icon
Meaning
Icon
REC
STBY
5 GETTING STARTED
5.1 Installation
Please refer to the 'Quick Installation Guide', and also installation
video guide can be found on our YouTube channel.
NOTE: Please test the dash cam before installing it on your motorcycle.
You can read the user manual or contact the seller if there is any question.
5.2 Inserting a Memory Card
Insert the memory card into the card slot until it clicks. To remove the
memory card, push to eject the memory card out of the slot.
NOTE:
1. Make sure inserting the memory card with right direction: The golden
finger side of memory card facing the screen of the DVR.
2. Do not remove or insert the memory card when the device is being
powered on. This may damage the memory card.
3. Please use high speed micro SD card with CLASS⑩.
4. Please format cards before use and anytime a significant amount of data
has been collected to ensure that device and SD cards are working
properly together.
Frame rate (30fps)
Video resolution(FHD)
Video mode
Playback mode
Standby mode
Wi-Fi connected
Wi-Fi disconnected
Memory card(Inserted)
Recording
Wi-Fi status(on)
LCD power save
Off/1/3min Set screen saver time
Protect level Off/0/1/2/3/4 level Set the G-sensor sensitivity
NOTE: You can search ‘V-SYS’ on Google Play or APP Store to find ‘WiFi
Camera’ to download.
USER MANUAL
P6 Series
The information in this manual is subject to change without notice.
Ride Safe, Ride Smart!
Motorcycle Dual Dash Cam
Rear Camera
Front Camera
Main unit
Wired controller
Power Supply Cable
GPS tracker (optional)
①Normal Power Module :
Connect to battery "+" "-" and
ignition wire.
②Smart Power Module :
Connect to motorcycle battery
directly.
GPS : Fix it outside and let it be
30cm away from the front& rear
camera in case signal shield or
interfered
Main unit : Fix it under the seat or on
handlebar(if it’s waterproof)
Controller : Fix it on the handlebar
Attention:
1. It costs around 1min to search the satellite signal only
when you fix the module outdoors. ( High buildings,
Indoors, Tunnels, weather conditions etc may affect GPS
signal reception)
2. Never connect to unmatchable power adapter nor bend
the power cable too hard in case of short circuit.
3. Due to software upgrades, resulting in some of the
interface and function and specifications are subject to
change without prior notice.
4. This manual has been carefully checked, but does not
rule out the possibility of a small amount of text error,
please contact us if there is anything make you confused.
5. The pictures in this manual are for reference only,
please in kind prevail.
6. Please read the instructions carefully before operation.
Warning:
Never allowed to operate this product while driving!
Never disassemble nor attempt repair of this product.
Doing so may damage the DVR, cause electronic shock
and void your product warranty.
- 15 -