Mini Wireless Presenter User’s Manual Be sure to carefully read this user’s manual first for the proper use of the Mini wireless presenter and keep it for future reference.
Table of Contents Introduction..................................................................... 2 I. Operation system ........................................................ 2 II. Components ······························································· 3 III. Installation ................................................................. 4 IV. Functions ................................................................... 4 V. Battery installation .....................................................
Instruction Mini wireless presenter is an excellent tool for making presentations. Feel free to move around as you present. No longer do you have to be in direct sight with your receiver. With your wireless presenter you can now activate your application remotely, flip slides, use the laser pointer to make the point and then store it into laptop’s PCMCIA slot for storage. It comes with a transmitter and a USB receiver. Features: 1.
Take out the USB Receiver Pull up the USB receiver and take out the receiver Put back the USB Receiver 3
Insert the bottom of the USB receiver, label upwards, into the compartment first and press the USB receiver to the compartment. III. Installation Plug the receiver into the USB port on your PC. The system will automatically search the new hardware and get the setup completed. (Attention: you may need Win98 disk if your computer runs Win98/SE operating system.) IV.
ESC Esc Click this key to Escape Laser Click this key to generate red laser light Mouse up Click this key to make mouse point move up Mouse down Click this key to make mouse point move down Mouse left Click this key to make mouse point move left Mouse right Click this key to make mouse point move right L Mouse button Click this key to make function R Mouse Right Button Click this key to make function Blank screen or come back Click this key to close the screen of PowerPoint play Click ag
Operating Hints For optimal performance and RF reception: Place the receiver at least 15 cm away from all electrical devices, such as your monitor, speakers or external storage devices. V. Battery installation z z z z The unit is powered by 1x CR2032 battery. Pull up and remove the battery compartment cover. Insert 1x CR2032 battery into the battery compartment. Put the battery compartment cover back in position. Note 1. Do not insert battery into the presenter in the wrong direction. 2.
Transmitter Interface Class ll RF Frequency Class llla 433.92±0.075MHz 433.92±0.075MHz RF Power 0 dbm 0 dbm Control distance Up to 10 meters Up to 10 meters Laser distance Up to 200 meters Up to 200 meters Battery 1 x CR2032 1 x CR2032 Working voltage 3V 3V Sleep current 1uA 1uA Wavelength 650nm 650nm Max output < 1mW < 5mW Class Class ll Class llla Dimension 8.5x5.5x0.5 cm 8.5x5.5x0.
authority to operate the equipment. Any change to the equipment will void FCC grant. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.