Wireless remote / Wireless presenter User's Manual Be sure to carefully read this user’s manual first for the proper use of the Mini Presenter and keep it for future reference.
Table of Contents Introduction..................................................................... 2 I. Operation system ........................................................ 2 II. Parts description ......................................................... 3 III. Installation ................................................................. 4 IV. Functions................................................................... 5 V. Functions table ...........................................................
Instruction It is a great tool for PowerPoint presentations! With it, you don't need to stand beside your computer or have an additional person click the slide for you! The presenter provides two working modes----Cursor Mode and Presenter mode. It contains two parts: remote control and USB receiver Advantage: 1.
II.
III.
B) MousePointer Mode Mouse point up Mouse point down Mouse point left Mouse point right Laser L Mouse left key Attention: There are two kind of speeds that the cursor move (LowSpeed and HighSpeed) (1) Push&Hold for less 1 second: LowSpeed (2) Push&Hold for over 1 second: HighSpeed LowSpeed: getting exact position HighSpeed: Locating Fast C) Built-in flash memory is optional (no memory/64/128/256/512/1024MB ) 6
V. Battery installation The remote is powered by 1x CR2032 battery. Push and remove the battery compartment cover. Insert 1x CR2032 battery into the battery holder. Put the battery compartment cover back into position. ① ② ③ ④ Note 1. Do not insert battery into the device in the wrong direction. 2. Do not leave bad or exhausted battery in the device 3. If you do not use the device for a long period of time, remove the battery to avoid possible damage from battery corrosion. 4.
VI. Technical parameters Transmitter Control distance Up to 15 meters Battery 1 x CR2032 Working voltage 3V Sleep current 1uA Output Power 0dBm Laser Power <1mw or 5mw Wave length 630-680nm Frequency 2.402GHz Wireless method RF Dimension 32×87×8mm Weight 17g Receiver Operation system Windows 98/Se, Me, 2000, XP, Mac USB version USB1.1 Compatible USB2.0 Working voltage 4.5-5.5v OS, Linux Frequency 2.402GHz Wireless method RF Working voltage USB electricity supply (4.5-5.
Safety Measures z To avoid possible eye damage, never point the presenter at people especially their faces, or look directly into the presenter’s laser beam. z Avoid pointing the presenter’s laser beam at a mirror or other highly reflective surface. z Keep the presenter away from young children. z Never view the presenter’s laser beam using telescopic devices, such as a microscope or binoculars.
Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.