Embedded Type Presenter User’s manual Be sure to carefully read this user’s manual first for the proper use of the Embedded Type Presenter and keep it for future reference.
Table of Contents Introduction..................................................................... 1 I. Operation system ........................................................ 1 II. Components ............................................................... 2 III. Functions ................................................................. 3 IV. Battery installation ..................................................... 4 V. Technical parameters.................................................. 5 VI.
Thank you for purchasing the Embedded Type Presenter. This manual will provide you directions for the safe and efficient operations of your Embedded Type Presenter. It is a tool for PowerPoint Presentation. It works as a laser pointer, a remote, a portable storage device. It contains two parts: transmitter and USB receiver. Features: 1. Easy carry The transmitter and receiver are integrated into one unit to easy carry! 2.
II. Components Embedded surface Pull Push USB Receiver Transmitter USB Plug USB Cover .
III.
IV. Battery installation ● The product is powered by 1x CR2032 battery. ● Push and remove the battery compartment cover. ● Insert 1x CR2032 battery into the battery holder. ● Battery positive (+) is up and negative (-) is down. ● Put the battery compartment cover back into position. Note 1. Do not insert battery into the device in the wrong direction. 2. Do not leave bad or exhausted battery in the device 3.
VI . Technical parameters Transmitter RF Frequency 2.453 GHz RF < 0 dBm Output Power Control distance Up to 10 meters Battery 1 x CR2032 Working voltage 3V Sleep current 1uA Dimension 92X33X8 mm Weight 20g(without battery) Receiver Sensitivity -100dBm Interface USB Operation Windows 98/Se, Me, 2000, XP, Vista, system Mac OS, Linux USB version USB1.1 , Compatible with USB2.0 Working voltage USB electricity supply (4.5-5.
VII. Safety Measures z To avoid possible eye damage, never point the presenter at people especially their faces, or look directly into the presenter’s laser beam. z Avoid pointing the presenter’s laser beam at a mirror or other z Keep the presenter away from children. z Never view the presenter’s laser beam using telescopic z Any attempt to disassemble, adjust or repair the presenter highly reflective surface. devices, such as a microscope or binoculars.
Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
