Mini Electronic White Board User’s manual Be sure to carefully read this user’s manual first for the proper use of the Mini electronic board presenter and keep it for future reference.
Tables of contents Features···························································································2 I. Operation system ··········································································2 II. Part description ············································································3 III. Installation···················································································5 IV.
Features: z The system consists of a mini white board remote, a touchpen, a receiver and a program. z Combining state of the art 2.4GHz radio frequency technology, control distance up to 8m, an ideal partner for the projector and the PC. z Up to date electromagnetism technology, orientation precisely by 4 calibration points. Please be sure to set them before using. z The Touch pen is built-in the mini white board, easy to carry. z Multicolor handwritings are available. z Effective tablet area up to 14cm×7.
Mini white board front view USB receiver Touch pen LED KEY FUNCTION Shortcut key Desktop +D Colorized pen/Screen mode OK Enter Enter 3
UP arrow /Red pen Left arrow/Black pen Right arrow/Blue pen Down arrow/Green pen L Mouse left button R Mouse right button/Open brush pencil/eraser/magnifier/focus lamp menu bar Pre. Page/Line weight thicker/ Enlarge eraser Page Up size /magnification /focus lamp size Next page/Line weight thinner/ Diminish Page Down eraser size/magnification /focus lamp size Clear handwriting Close current window Alt+F4 Alt+Tab Switch current windows Alt+Tab ESC Esc Esc III.Installation 1.
Board mini_setup_V1.1.0.exe” to start installation. Complete the installation, and view the icon of the program on the desktop. 2. Install the receiver Plug the USB receiver to the available USB port. And the Program will find the new hardware and pop-up the Add Hardware Wizard dialog box. Follow the wizard, find the driver, and finish the installation. After the connection, move the mouse pointer to the icon of the Mini Electronic White Board, the program will present “ ”.
3. Remote control The touch control screen is absolutely convenient to do any interactive operations, and operate the applications on PC using the touch pen. 4. Switch mode Press and hold the “ ” button on the mini white board, user can remark or label on the white board via the touch pen by pressing the “L” key and move the touch pen. Real-time data will be transmitted to and displayed on the computer screen.
As well as ,when you use the brush pencil, or eraser, or magnifier or focus lamp, press the “R” button, you can open corresponding menu bar to set up some parameters. At the same time press the “L”button and move the touch pen, user could draw lines, erase handwritten with the eraser, move the magnifier or focus lamp in corresponding function mode. 7. Shortcut keys ① Press “ ” key, show desktop. ② Press “ ” key, just like press the “Enter ”button on the keyboard.
size, magnification or focus lamp size. ⑤ Press “Alt+Tab” key, could switch the current applications. ⑥ Press “Esc”key, it works as “Esc”button on the keyboard. ⑦ Press “ ” can close the current window. It works as press “Alt” and “F4” keys on the keyboard at the same time. ⑧ As well as, it supports the pen shortcuts. On the keyboard, press the “R” button, you can open the red pen; press the “G” button, can open the green pen; “B” button open the blue pen, “Y” button can open the yellow pen. 8.
z Push and remove the battery cover located on the bottom of the device. z Insert batteries into the battery holder and make sure that the Positive (+) and Negative (-) ends of each battery match the polarity indicators inside the battery housing. z Push the battery cover back into position until it “clicks” firmly into place. 1. A wrong battery placement may cause a battery overheat.
if not use for a long time. z Remove the batteries from the transmitter if the device is not to be used for a long time. z Do not mix different types of batteries in the mouse. VI.Technology parameter Mini white board Control distance 8m Frequency range 2.417~2.468 GHz Channel number 18 Frequency interval 3M Transmitting power 0 dBm Tablet area 14cm×7.8cm battery 2 x AAA nickel and metal hydride electric batteries. Work voltage 3.0V Touch pen length 123.5 MM dimension 21.5×14.2×1.
VII. Attention z Keep the presenter away from young children. z Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. z Do not place heavy objects on the mini white board to avoid crushing. z Do not use ball pens or other sharp instruments to scratch on the touch screen. Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.