Owner's Manual

ManualsBrandsVoxx Electronics ManualsElectronics8812

Table Of Contents

8812 Module

Cover Control Module

Cover Control Module Owner’s Manual (R1.00) PAGE-1

1. Product Description:

The cover control module (8812) is specifically designed to work with VOXX’s DS4 and DS4+ product line up. This

module will be used to control a tonneau cover system for pickup trucks.

The purpose of this module is to provide a safe and secure environment for valuables in a pickup truck

bed while offering easy access to the pickup bed’s contents with a click of a button or using a smartphone.

The tonneau cover can be extended or retracted with the push of a button from a keypad or a capacitive

touch both using BLE technology, and from the OEM key FOB. The system controls and monitors two

motors to open and close the cover, and to stop if an object is pinched. This system includes, but out of

scope from VOXX Electronics , aluminum slats mounted on ball-bearing slides located within a patented track

system from Truck-Hero that ensures smooth operation.

2. Cover Control Module Wiring Connections

Figure 1: Cover Control Module System Diagram

Summary of content (6 pages)

PAGE 1
8812 Module Cover Control Module 1. Product Description: The cover control module (8812) is specifically designed to work with VOXX’s DS4 and DS4+ product line up. This module will be used to control a tonneau cover system for pickup trucks. The purpose of this module is to provide a safe and secure environment for valuables in a pickup truck bed while offering easy access to the pickup bed’s contents with a click of a button or using a smartphone.
PAGE 2
8812 Module Cover Control Module Figure 2: Cover Control Module Harness Layout 3. Cover Control Module system components Item 1 2 3 4 5 6 7 Component DS4+ Module CCM (Cover Control Module) Mobile APP 5-Button Bluetooth Keypad Retract Motors (2x) 2-Button Capacitive Front Panel Actuation 4. Cover Control Module major feature lists Item 1 2 3 4 5 6 7 8 9 10 11 12 Cover Control Module Owner’s Manual (R1.
PAGE 3
8812 Module Cover Control Module 5. Cover Control Module mounting location 6. Operations A) Calibration process: Description: A calibration process must be completed during the installation to ensure that the system can properly detect the end points. Steps: 1. Send 3x RKE Unlock with normal press (like 3x Lock start press). The bed cover should move to fully open at a slow speed. 2. Send 3x RKE Lock with normal press. The bed cover should move to fully close at a slow speed.
PAGE 4
8812 Module Cover Control Module GOVERNMENT REGULATIONS This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 5
8812 Module Cover Control Module LIMITED ONE-YEAR CONSUMER WARRANTY For a period of ONE YEAR from the date of purchase of a VOXX Electronics product, Voxx Electronics.
PAGE 6
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.