WIFI BABY MONITOR What’s inside User Guide PNMWIFIAC Welcome!................................................................. 2 Getting started....................................................... 3 Tour of the system................................................ 9 Everyday use..........................................................13 Motion detection............................................14 Sound detection.............................................14 Auto-record time........................
WELCOME! This WiFi Baby Monitor makes it simple to keep your eyes and ears on your little one from anywhere! This guide takes you through the steps to get started! Step 1: Unpack The accessories: (1) Power adapter (1) 10’ charging cable (2) Mounting screws Check out our setup videos On your computer, go to http://bit.ly/pnwifi-setup or scan the QR code here. Before you start... Make sure you read the Important Information sheet included in this package.
Getting Started GETTING STARTED Step 2: Position the camera Find a location for the camera that gives you the best view of your baby in his or her crib. Place the camera on a flat surface, like a dresser or shelf, or mount the camera to a wall using the keyhole slots on its bottom (see the mounting template included in this package). IMPORTANT: NEVER place the camera or cords of any kind inside the crib. NEVER place the camera or cords within reach of the baby.
Getting Started Step 3: Test your WiFi signal Your Project Nursery WiFi Camera needs strong enough signal from your WiFi router in order to send its video signal. Here’s how to test the strength of your WiFi signal in your baby’s nursery using your smartphone or other portable wireless device (like a tablet or iPod touch). Step 4: Plug in the camera Plug one end of the included charging cable into the DC In jack on the back of the camera. First, go to where you want to put the camera.
In the Google Play or Apple App Stores, search for “PROJECT NURSERY MONITOR” and look for the icon shown here. Then download and install the App. Step 7: Create a Project Nursery user name and password ® Register Login Sign Up Step 6: Launch the Project Nursery Monitor App Once the Project Nursery Monitor App has installed on your smarphone or tablet, press the icon to launch the App.
Getting Started Step 8: Pair the WiFi camera with the App. Add Camera Scan QR code located on bottom of camera Make sure the Project Nursery App is open on your phone or tablet. Also make sure that your phone or table is connected to your WiFi network.
Configure WiFi 1. Your camera should be plugged in and turned ON. Press the “Set” button on the bottom of your camera for 1 second.You will hear one beep and the LED will start blinking red. 2. Choose WiFi SSID (or network name) and enter password below. Make sure you enter the info correctly. If your WiFi SSID does not have a password, you will need to create one. This is for your safety and security. Consult the user guide for your WiFi router/AP to add a password.
Getting Started Step 9: Choose the camera from the home screen ® ® Sally’s nursery Device ID:1234567891234560 Sally’s nursery Device List Message My Center The Camera View screen is your gateway to total control Device ListWiFi camera Message My Center of your from virtually anywhere. Sally’s nursery 2016-1-28-12:000 HD R E CO R D SD SNAPSHOT JOYSTICK TALK 8 Device ID:1234567891234560 Press the part of the home screen showing the camera you set up in order to choose this camera.
TOUR OF THE SYSTEM Tour of the system Camera View Screen Sally’s nursery (Settings) accesses the Settings menu for this camera. Press this icon to adjust the WiFi and other settings for this camera. 2016-1-28-12:000 (Multi-Camera View) lets you see multiple cameras at once on a single screen (if you’ve set up multiple cameras). Press this icon to access the multi-camera view screen. HD SD (HD-SD Select) lets you switch between high- and standarddefinition video on the view screen.
Sally’s nursery (Joystick) moves the camera angle. Press and hold in the direction you want the camera angle to move. (You can also pan/ tilt by swiping on the screen in the direction you want to move.) JOYSTICK 2016-1-28-12:000 (Talk) lets you speak through this camera’s built-in speaker. Press and hold this icon to start speaking. TALK Tour of the system SOUND ON HD R E CO R D SD SNAPSHOT JOYSTICK TALK 10 SOUND ON (Sound On/Off) turns the sound from the camera on and off.
Camera (back) Nighttime sensor adjusts the camera sensitivity to the amount of ambient light. Adjustable antenna communicates wirelessly with your WiFi network. Microphone picks up sound around the camera. POWER button (right side) turns the camera on and off (press and hold). Thermal sensor detects the temperature around the camera. DC In jack plugs into your charging cable to power the camera.
Camera (bottom) Tour of the system Mounting keyholes let you mount the camera on a wall (mounting screws included). MICRO-SD slot (left side) accepts a micro-SD card (not included) for storage of automatic photos/ video. SET starts the WiFi setup process (press and hold). QR code passes the camera ID information to the App during the WiFi setup process.
3. EVERYDAY USE In the Camera View screen, press the (Settings) icon to customize your WiFi camera’s setup. 2016-1-28-12:000 2016-1-28-12:000 Settings Motion detection HD H M L OFF H L OFF 20s 60s 90s SD Sound detection R E CO R D SNAPSHOT JOYSTICK TALK SOUND ON Battery Life Auto-record time This chapter takes you through the settings you can customize, one by one.
Settings Motion detection H Sound detection M L OFF H L OFF IMPORTANT: You must have a micro SD card Battery Lifeinstalled in your WiFi camera to use the autorecording function feature.
Settings M L OFF H L OFF 20s 60s 90s H Motion detection Sound detection Battery Life Auto-record time Temperature alarm IMPORTANT: You must have a White Noise Music micro SD card installed in your WiFi camera to use this feature. Auto-record time You can set up the camera so that it automatically records a certain amount of video when the camera detects a motion or sound alert.
Settings Motion detection H Sound detection M L OFF H L OFF 20s 60s 90s Battery Life Auto-record time Temperature alarm 1 2 Share camera with friend Flip horizontally Flip vertically Camera time set Settings Camera info Motion detection H M L OFF H L OFF 20s 60s 90s Everyday use Delete Camera Sound detection Battery Life Auto-record time Temperature alarm White Noise Music Music Share camera with friend "I Don't Want to Miss a Thing" Flip horizontally "Holiday" Flip ver
Sound detection H L OFF 20s 60s 90s Battery Life Auto-record time Temperature alarm White Noise Share with friend Share camera with friend Flip horizontally Share camera with friend The Project Nursery WiFi Camera lets you share video with friends and family, so that they can see what’s happening with baby. These guest accounts have limited access to settings—they can view and talk through cameras and record pictures and videos directly to their phone.
Battery Life Settings Auto-record time Motion detection H M 20s L Temperature alarm H L Sound detection 60s 90s OFF OFF White Noise Music Battery Life Share camera with friend Auto-record time 20s 60s 90s Flip horizontally Temperature alarm Flip vertically White Noise Music Camera time set Share camera with friend Flip horizontally / vertically Flip horizontally and vertically let you reverse the orientation of the Camera View video.
White Noise Music Share camera with friend Flip horizontally Flip vertically Camera time set Camera info Device info Settings Device name Motion detection H Delete Camera Serial # Sound detection MAC address M IPL Camera OFF 215451516514 OFF H L 442412314575756 Battery Life Hardware version 20130101 Software version Auto-record time 60s 90s 20s BNHS5750101 Temperature alarm Space capacity Music Use White Noise 3.0GB Share camera with friend Available 2.
4. TROUBLESHOOTING / FAQS Most issues with the Project Nursery baby monitoring system can be solved by following one of the troubleshooting tips below. For additional assistance, please call 1-844-393-7338. I can’t connect the WiFi camera to my network. + Make sure your phone or tablet is connected to the WiFi network you want to use. + Make sure the camera is getting a good signal from your WiFi router. See page 4 for more information. + Make sure your router is broadcasting its SSID (name).
The WiFi camera’s indicator light flashes green. + The camera is being actively viewed. I don’t see video from the camera on my phone/tablet. + Make sure the camera is turned on and that it has enough charge or is plugged in to a working outlet. + Make sure the camera is within range of your WiFi router (certain kinds of signal obstacles, like large metal objects, might shorten the range somewhat).
I can’t hear sounds from baby’s room. + + + Make sure the volume on your phone or tablet is turned up. Make sure sound is turned on in the Camera view screen. Make sure the microphone on the camera is not blocked. The microphone is just below the lens. The lullabies/sounds aren’t playing. + If you have multiple cameras, make sure you’ve chosen the one you want the lullabies to play on before you start the lullaby. Go to the Home screen and choose the camera you want.
Sound alerts don’t work. + + + You might need to adjust the sensitivity of the alerts—for example, if Sound detection is set to Low, the monitor will not come on as often as when Sound detection is set to High. To adjust this setting, go to Settings > Sound detection. If you have multiple cameras, you might need to set an alert for the camera you’re using—sound alerts need to be set separately for each camera. The App gives a maximum of 2 notifications every 4 minutes.
©2017 Voxx Accessories Corp.