NOW YOU NEVER HAVE TO ASK… WHO’S THERE? HSDB1 QSG 00 1
WHAT YOU GET EASY SETUP 1 Mount the doorbell camera to an existing doorbell 2 Download the RCA Security App WiFi doorbell camera with 1 faceplate installed 3 extra faceplate options ~ 1.5 in x2 Mounting screws 3 Connect to Wi-Fi x2 Mounting anchors x2 Set screws Security screwdriver 4 Customize your device settings x2 Wire nuts . . Mounting template Mounting Template Paste the template on the required place.Drill screw holes and cable holes according to the template. Hole A:Cable Hole.
MOUNT THE DOORBELL CAMERA Turn off power to your doorbell’s circuit 4 Find the breaker that controls the circuit for your doorbell. Turn it off before you continue installation. 2 —OR— Insert ~ 1.5 in Drill Remove your existing doorbell Remove & unhook Carefully remove your existing doorbell from the wall. Then unhook your home’s wiring from the doorbell’s terminals. Apply the mounting template sticker to the wall ~ 1.5 in ~ 4.5 in 3 Drill holes for the doorbell camera . .
MOUNT THE DOORBELL CAMERA (continued) 6 Connect the doorbell camera to home power Check if your home’s doorbell power wires are long enough to connect directly to the terminals on the back of the doorbell camera. Terminals Loosen Doorbell camera back Use the screwdriver provided in this package to loosen the terminal screws on the back of the doorbell camera.
7 Mount the doorbell camera to the wall Anchors If you’re mounting to masonry or brick, insert the provided anchors in the holes you drilled before proceeding. 8 Turn on power to your doorbell’s circuit Turn the circuit that powers your doorbell back on. The doorbell camera’s blue indicator light turns on. Route the power wires and/or wire leads into the wall. DOWNLOAD THE RCA SECURITY APP Align the holes on the doorbell camera’s body with the holes you drilled.
CONNECT TO WIFI 1 Launch the App You can register by mobile phone number or by email. The App will send you a verification code to link this number or e-mail address with your account. Follow the steps in the App to proceed. Once the RCA Doorbell Camera App has installed on your smarphone or tablet, press the icon to launch the App. IMPORTANT: The first time you launch it, the App will ask if it can send you notifications. Click “Allow” to let the App push notifications to your phone or tablet.
Find the QR code and serial number on the front of the doorbell camera. Scan the QR code with your phone when prompted by the App (or enter the serial number manually). Once the App recognizes your doorbell’s serial number, the App asks you to connect to your WiFi network. Tap the Connect to a Network button in the App. Enter the name and password for the WiFi network your phone is connected to.
CUSTOMIZE AND USE! 1 Install a faceplate Set Screw 2 Choose the included faceplate that you want to use and place it over the doorbell camera’s body. Insert one of the security screws into the bottom of the doorbell camera and screw it into place with the security screwdriver. Live View Launch the RCA Doorbell Camera App and press Start Live View. Who’s There? (Video Intercom) When a visitor rings the doorbell, you get a push notification on your phone or tablet.
TOUR OF THE SYSTEM: LIVE VIEW SCREEN (Back) goes back to the device list screen. (Micro-SD Card) accesses any content stored on the camera’s Micro-SD Card (pre-installed). Press this icon to start viewing or downloading motion/sound-activated videos or images from the camera’s Micro-SD Card. (This is where you’ll see auto recordings.) (Settings) accesses the Settings menu for this camera.
TOUR OF THE DOORBELL CAMERA FRONT AND BOTTOM Mic captures audio around the doorbell. Lens captures video in front of the doorbell. IR light (behind panel) activates automatically for night vision. Call button sounds the doorbell. Indicator light shows the camera status: Solid blue when starting up and working normally Flashing blue and red when WiFi is not connected BACK Screw terminals 1 and 2 connect to the power source from your home.
FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
