User's Manual
Let’s get started!
808 Performer BT headphones give you two ways to enjoy
your own personal concert: wirelessly and wired. This guide
shows you how to get both set up.
1
Turn on the headphones
2
Performer BT Wireless
Unpack
Make sure you have the following items in your 808
Performer BT package:
• 808 Performer BT headphones
• Cloth audio cable with inline mic and controls
• USB charging cable
Charge up the headphones
Before you start using your headphones wirelessly, you
need to charge their built-in battery.
Plug the included USB charging
cable into the charging jack on the
bottom of the right headphone.
Plug the other end of the charging
cable into a USB power source (like
a computer or a USB charger).
The charging/pairing indicator next
to the charging jack turns red while
the headphones are charging. It
turns blue when the headphones
are fully charged.
Unplug the USB charging cable when
the headphones are charged.
Press and hold the
button on the
bottom of the right headphone for 3
seconds to turn the headphones on.
Charging Charged
Right headphone
(bottom)
Performer BT Wired: Listen right away!
1
Left
headphone
(bottom)
Plug in the
headphones
Plug the included audio cable into
the jack on the bottom of the left
headphone.
2
Carrier 12:00 PM
Connect to your phone
Plug the other end into the headphone
jack on your phone.
The audio cord provides inline push-to-talk
and play/pause control for select mobile
phones and other electronics.
Here’s how it works:
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
To play/pause music: Single click.
To skip to the next song: Quick double click.
To go back to the previous song: Quick triple click.
To answer/end a call: Single click.
Please note that not all functions work with all brands
and models of phones. Each phone’s user interface works
dierently—see the user manual that came with your
phone for more information.
Right
headphone
(bottom)
Instructions continue on the other side...
The headphones beep and the pairing/
charging indicator next to the charging
port begins blinking rapidly.
IMPORTANT: If you’ve previously paired your phone or other Bluetooth
device with these headphones, the headphones will automatically
attempt to reconnect to that device when you turn them on. If you want
to pair to a new device, give a short double-press to the
button on the
bottom of the left headphone to enter pairing mode. The indicator light
begins flashing quickly and the headphones say “Pairing”—this means
you’re in pairing mode.
Right headphone
(bottom)