User's Manual

ManualsBrandsVoxx Accessories ManualsAudio EquipmentPortable Bluetooth Speaker

portable wireless speaker

quick start guide

Welcome

Congratulations on your purchase of this Acoustic

Research Premier Series speaker, the ultimate in

stereo-capable wireless sound and multi-mode

lighting. This speaker offers two setup options:

Single-Speaker setup for one Premier

speaker

Stereo setup for two Premier speakers

This guide takes you through the steps for either

setup option.

AWSEE3

Instructions en français ...........................9

Instrucciones en español .......................17

PREMIER

AWSEE3 IB 00

Summary of content (8 pages)

PAGE 1
AWSEE3 PREMIER portable wireless speaker quick start guide Welcome Congratulations on your purchase of this Acoustic Research Premier Series speaker, the ultimate in stereo-capable wireless sound and multi-mode lighting. This speaker offers two setup options: Single-Speaker setup for one Premier speaker Stereo setup for two Premier speakers This guide takes you through the steps for either setup option. Instructions en français............................9 Instrucciones en español......................
PAGE 2
Unpack Make sure the following items came in this package. • Wireless speaker • AC power adapter • 3.5mm Aux in cable Charge the Speaker The speaker’s built-in rechargeable battery comes from the factory with a charge, so you can start using the speaker as soon as you get it out of the box. For best performance, however, we recommend you charge the speaker fully before using it. To charge the speaker: Plug the included AC cable into the DC In jack on the back of the speaker.
PAGE 3
Single-Speaker Setup 1 Set the Left-Mono-Right switch to Mono. 2 Press the (Speaker On/ Off) button on the back of the speaker to turn it on. Speaker back Speaker back The Status light on the back of the speaker starts blinking blue, and the speaker says “Pairing.” 3 Enable Bluetooth on your device (if it isn’t already on). 8:45PM Make sure Status light on the back of the speaker is blinking blue.
PAGE 4
Single-Speaker Setup 5 Start playing music on your Bluetooth device. The speaker starts streaming your music wirelessly. 8:45PM Note: Make sure your Bluetooth device is set to at least 75% volume. To control the volume, press the + and – buttons on the back of the speaker, or use the volume controls on your Bluetooth device.
PAGE 5
Stereo Setup 1 Set the Left-Mono-Right switch on one speaker to Left. Speaker back 2 Press the (Speaker On/Off) button on the back of the left speaker to turn it on. Left speaker back 3 If you have two speakers... Set the Left-Mono-Right switch on the other speaker to Right. Speaker back Press the (Speaker On/Off) button on the back of the right speaker to turn it on. Right speaker back The Status light on the back of the left speaker blinks white slowly.
PAGE 6
Stereo Setup 4 Enable Bluetooth on your device (if it isn’t already on). 8:45PM Wi-Fi Wi-Fi Settings Bluetooth Bluetooth Settings VPN Settings 5 Select AR Santa Clara Stereo from the list of Bluetooth devices available. 8:45PM Bluetooth devices Headset If you have two speakers... Make sure the Status indicator on the back of the left speaker is blinking white. (If it isn’t, press and hold the (Pair) button on the back of the left speaker until the speaker gives an audio signal.
PAGE 7
Using the Aux In input of ress he left nal.) Use the audio cable included with this speaker to connect the audio output from your device to the Aux In audio input on the speaker’s back panel (you might need to open the rubber flap protecting the jack). The speaker automatically switches to the Aux In audio. t aker that you d the gives If you’re using a single speaker, the Status indicator turns white you’re using the Aux In input.
PAGE 8
Tour of the Premier Series wireless speaker Back Speaker On/Off button turns the speaker on and off. Pair button initiates pairing with a Bluetooth device. Volume – and + buttons increase or decrease the volume of the speaker’s audio. Status light shows the connection status of each speaker. If you’re using the Single-Speaker Setup: Solid blue means the speaker is connected via Bluetooth. Fast blinking blue means the speaker is ready to pair via Bluetooth.