USER GUIDE
PRECAUTIONS ON THE ROAD Using a device while driving is illegal in many countries. Please refrain from using yourmobile while driving. NEAR SENSITIVE ELECTRONICS OR MEDICAL EQUIPMENT Donʼt use your device near sensitive electronic equipment – particularly medical devices such as pacemakers – as it could cause them to malfunction. It can also interfere with the operationof fire detectors and other automatic-control equipment. WHILE FLYING Your device can cause interference with aircraft equipment.
AUDIO VOLUME WARNING At very high volume, prolonged listening to a mobile device can damage your hearing. PARTS AND BUTTONS OF THE DEVICE 1 .Front camera 2. Receiver 3. light distance sensor 4. Touchscreen 5. Volume button 6. Power button 7. Back button 8. Home button 9. App switch button 10. Micro USB and charging port 11. Earphone jack 12. Rear camera 13. Flash 14. Speaker 15. Microphone TOUCH BUTTONS The button moves back one step to the previous menu/page. The screen.
WARNING! To avoid damage to the phone, do not use any other kind of SIM card, or any non-standard micro-SIM card cut from a SIM card. You can get a standard micro-SIM card from your service provider. Insert the battery by aligning the metal contacts on the battery with themetal contacts in the battery compartment. Gently push down on the battery until it clicks into place. Align the back cover with the back of the phone and press the cover back into place.
• Data usage – Enable/disable mobile data, view current usage, set mobile data limit (note: this function is available only on devices supplied with 3G card functionality) • Hotspot & tethering - Including Usb tethering,Blutooth tethering and Wi-Fi hotspot. 2.2. Connected devices • Bluetooth – Connect or disconnect Bluetooth devices . • USB - Insert the USB line to use this menu. 2.3.
Inserting TF Card : Please ensure when inserting an SD card your phone is powered “OFF” 1. Insert the TF card into the TF card slot located under the SIM card cover as explained in the Inserting/Removing SIM card section. Gently push TF card into slot until it clicksinto place. 2. A prompt will be seen on the screen saying “Preparing SD card”. Removing TF Card: 1. Close all applications and documents which have been opened from the TF card. 2.
Long Press: Press and hold an icon to delete or move an icon or app,and will display APP info 、Widgets、shortcut menu ect. Drag: Press the icon and drag it to a different screen. HOW TO CONNECT TO A COMPUTER Note:Turn on your phone before connecting the phone to a PC by USB cable. 1. Use a USB cable to connect the phone with a computer. The phone will automatically detect a USB connection. 2. The USB connection menu will be displayed in the notification bar, select the desired USB operation. 3.
CAMERA Touch the icon to enter camera mode and the interface is shown as follows: 1. Touch the icon to take a photo. 2. Touch the icon to start camera recording. 3. Touch the iconon the top right to see the previous picture and to delete, share or set it as a wallpaper. Click the return button to exit camera interface. 4. Touch the icon to switch from front to back camera.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.