Users Manual Part 2

ManualsBrandsVOREZA ManualsElectronicsVOREZA II

When using the Chameleon 8 Single device for the ﬁrst time, do not connect any peripheral device except the supplied battery

and AC adapter.

When handling the power (AC) adapter problems such as sudden voltage drops may arise during periods of thunder and

lightning. Try to avoid using the power adaptor during these periods.

When the DC plug is not connected to the unit, disconnect the AC cord from your electrical outlet. Power is consumed simply by

having the AC adapter plugged into an electric outlet.

Always hold the plug head when you unplug the connector, never pull out the cord.

The AC adapter is designed for use with your tablet only. Connecting the AC adapter to another device can damage the adapter.

CAUTION:

Digital signature pen (stylus) Power adaptor

An optional digital signature pen (stylus) is included with some Chameleon 8 Single configurations. This device can be

used in combination with the touch screen to capture accurate high quality signatures electronically. A dedicated

software application will create a signature window on the tablet display panel, allowing the applicant to sign on the

screen. Do not use excessive force and replace the stylus battery when needed.

The detachable mains power supply adaptor will connect to the DC Charge port on the Chameleon device, and can either

be used to supply power directly to the device or charge the device battery. The battery charging starts automatically.

Digital signature pen (stylus) Power adaptor

33 34

Replacing the Stylus Battery:

Click to select and

hold down to activate

sub-windows.

Hold down button to

erase digital lines.

Primary Button

Tip

Removable End Cap

Eraser Button

Lanyard

Green LED will light up when connected to

AC power

Summary of content (15 pages)

PAGE 1
Digital signature pen (stylus) Power adaptor An optional digital signature pen (stylus) is included with some Chameleon 8 Single configurations. This device can be used in combination with the touch screen to capture accurate high quality signatures electronically. A dedicated software application will create a signature window on the tablet display panel, allowing the applicant to sign on the screen. Do not use excessive force and replace the stylus battery when needed.
PAGE 2
Power adaptor Shoulder strap The power(AC) adapter operates on any voltage in the range of 100~240 V AC. The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because the device runs on DC power input, but an electrical outlet usually provides AC power. An optional shoulder/ neck strap allows you to effortlessly transport your Chameleon device, while still having access to the unit at all times.
PAGE 3
Turn device ON in sleep mode Basic operation *Note that most basic operation instructions are based on Microsoft Windows 10 Professional operating system. *Please contact a Microsoft agent or visit www.microsoft.com for any operating system related queries. *Should you use an alternative operating system, please contact the appropriate supplier for operating instructions. Press and release the power ON/OFF button located on the right side of the tablet to activate the screen.
PAGE 4
Emergency shutdown File Explorer If an emergency condition occurs where the device needs to be shut down immediately, press and hold the power ON/OFF button for more than ten seconds. This procedure should only be used in emergencies because improperly shutting down Windows may result in corruption of the operating system and/or the loss of data. You can explore the files and folders with the File Explorer application. Settings Sleep mode Allows you to access the settings of your device.
PAGE 5
Status bar The status bar in the lower-right corner of the screen shows various indicators, including WiFi connection, battery status, speaker level, action center icon and keyboard icon. Action center To launch the ACTION CENTER screen, swipe in from the right edge of the screen or tap the icon in the lower-right corner of the screen. You can then adjust various settings on the device by touching the corresponding square.
PAGE 6
Action center Connecting to a Wi-Fi network Tablet mode Tap it to open/close the Tablet mode. Quiet hours Tap it to turn on/off Quiet hours Rotation lock Tap it to lock/unlock the screen orientation. Location Enable or disable Location. If this setting is on, each person who signs in to this device can change their own location settings Note Tap it to open the Office OneNote app. All settings This tool allows you to access the settings of your tablet.
PAGE 7
Connecting with Bluetooth Light sensor You can use Bluetooth to communicate between the device and other Bluetooth devices, such as a smartphone. 1. Go to Settings -> Devices -> Bluetooth, slide it to the On position. 2. It will scan automatically and display the available Bluetooth devices. 3. Tap an available Bluetooth device name to pair with it and follow the instructions to complete the pairing.
PAGE 8
LED charge/power indicator LED power and charging indicators is located inside the power ON/OFF button. Cleaning your tablet Battery status level: Turn off your device. Disconnect any attached devices, headphones, speakers, and keyboard dock from the tablet and from their electrical outlets. When the Chameleon 8 Single unit is powered off, the user can press the power button for 1 second and release. This will initiate a cycle to establish the battery level status of the device.
PAGE 9
Troubleshooting Listed below are helpful hints to follow when you encounter any problem: Try to isolate which part of the tablet computer is causing the problem. Make sure that you turn on all peripheral devices connected to the tablet before turning on the tablet. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that all the device drivers are correctly installed.
PAGE 10
Hardware device problems The tablet computer does not recognize a newly installed device. Determine if a device driver needs to be installed. (Refer to the documentation that came with the device.) Determine if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.) Check the cables or power cords for correct connections. For an external device that has its own power switch, make sure that the power is turned on.
PAGE 11
Startup problems When you turn on the tablet, it does not respond and the LED Power Indicator does not light up. Press the power button for one second and check the units battery status to insure it has sufficient power available. Make sure the battery is installed correctly and is fully charged. Remove battery and connect the power supply to the unit and see if you can switch it on without the battery. If the unit switches on, retry switching on the device with an alternative battery.
PAGE 12
Cannot access the network. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. You have moved out of range of the network. Turn off power management. Regulatory Information Marking labels located on the exterior of your tablet and packaging indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements below.
PAGE 13
WEEE Symbol ISO Symbol IP65 Symbol Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. ISO 9001:2015.
PAGE 14
Technical Speciﬁcations Technical Speciﬁcations Standard Fingerprint Sensor Optical Single Finger Scanner with LFT (Live Finger Detection) FBI PIV & Mobile ID FAP20 certified Resolution: 500 PPI On-device template encryption / extraction Operates under direct sunlight up to 100,000 LUX with both wet & dry fingers (Option between one or two Single Fingerprint Sensors) Professional Technical Speciﬁcations Standard Professional Speaker 2 x Waterproof 1W stereo speakers Microphone 2 x Internal micro
PAGE 15
FCC STATEMENT： 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Accessories Standard Professional Stylus (Digital Signature Pen) 1024 pen pressure levels, 0.5mm hovering height 133pps pen digitizer rate with an active force between 20g & 500g Windows 10 Certified Neck / Shoulder Strap Rugged nylon neck strap *We provide a free SDK/API to support all your development needs. This device also fully supports multi-language options.