Laxton Group Global Headquarters Free Line: 400-333-2222 Website: www.chameleonbiometrics.
Welcome to the Chameleon Family!
NOTICE This user manual provides a summary of the basic product specifications and features. Before using each product, please read this user manual thoroughly. Pay special attention and adhere to the safety information throughout this manual. Some instructions in this manual are based on the Windows 10 Professional operating platform. If you are using another operating system, some operations may differ. Do not touch the LCD panel with sharp or hard objects.
General safety information : Table of contents Use the following safety guidelines to help protect your device from potential damage and to help to ensure your personal safety. Also adhere to and take note of any additional cautions and safety warnings throughout this manual. WARNING: To reduce the risk of fire or electric shock, do not expose this device to extreme heat, rain or moisture.
Introduction Purpose of this user manual The Chameleon 8 Single combines advanced biometric technology with mobile functionality in one rugged device. Compact and user-friendly, this tablet allows rapid, secure communication and data capture. Adaptable biometrics. Adaptable configurations. Adaptable applications. Adaptable environments. The Chameleon 8 is truly the most adaptable biometric tablet in the world.
Packaging Parts list When opening your Chameleon 8 Single packaging, please check and ensure that all the parts mentioned in the parts list are present and in good working condition. Part / Item Carton size: 340mm x 250mm x 80mm Quantity Chameleon 8 Single Tablet (Hand straps attached) 1 Power adapter (Battery Charger) 1 AC Cord 1 Manual 1 Carton with content weight: approx. 2.1kg (depending on config.) The Chameleon 8 Single device is neatly and securely packaged inside a custom carton box.
Part / Item Image Quantity Cleaning Cloth 1 *Stylus 1 *Neck Strap (Optional) 1 Product details Physical Characteristics: *Indicates items available only on specific non-standard configurations. Dimensions: 215mm x 237mm x 32mm Weight: 1.3KG (Approx. depending on config) Note: The Chameleon 8 Single can accommodate one or two single fingerprint sensors. The above image indicates the one single fingerprint model.
Labelling and security Product details The tamper evident tracking and security label.
Labelling and security Labelling and Security The tamper evident tracking and security label. The tamper evident security seal will protect the device against unauthorized physical penetration. Only authorized personnel are allowed to perform maintenance on the internal components of the device.
Battery install/remove Battery install/remove WARNING: Using an incompatible battery increases the risk of fire or explosion. Replace the battery only with a compatible battery purchased from manufacturer. The battery is designed to work with your Chameleon device. Do not use a battery from any other devices. Remove battery: WARNING: Before removing or replacing the battery, turn off the device, disconnect the AC adapter from the electrical outlet and remove any other external cables from the device.
Battery install/remove Battery information The Chameleon device is powered by a rechargeable, standard Li-Ion Polymer battery. A wall charger (AC power adaptor) is included with the device, for charging the battery. The battery comes partially charged. You must fully charge the battery before using your device for the first time. After the first charge, you can use the device while charging.
Battery information Conditioning a new battery Before you use a battery pack for the first time, there is a conditioning process that you should follow: 1. Connect the AC adapter and fully charge the battery. 2. Turn on the device and complete setting up the operating system. 3. Disconnect the AC adapter. 4. Operate the device using battery power. 5. Reconnect the AC adapter and fully charge the battery again. 6. Follow these steps again until the battery has been charged and discharged three times.
SD/ SIM/ SAM card installation SD/ SIM/ SAM card installation First turn off the Chameleon device and remove the battery. The SD/SIM/SAM card panel can only be accessed with the battery removed. Step 1: Locate SD/SIM/SAM card position as indicated in the image. Step 2: Remove screws and lift card cover. Insert micro SD memory card into slot in correct orientation as shown above. The device can accommodate a micro SD card with memory of up to 128GB. A memory card can be installed at any time.
Doors Doors All Chameleon 8 tablets have three unique slide away locking doors. The doors are located on the sides of each tablet. The single door on the right side of the tablet protects the IC contact card reader. The two doors on the left side of the device covers the external connection ports. Opening and closing the doors: Follow the steps below from step 1 to step 3 to open a door. To close a door, follow the steps in reverse order; from step 3 to step 1.
AUDIO / USB/ USB IC CARD When looking at your tablet screen in the upright position (fingerprint reader at top), the bottom left-side door (Door 1) covers a port panel. This port panel contains 1 x Audio and 2 x USB3.0 ports. When looking at your tablet screen in the upright position (fingerprint reader at top), the right-side door (Door 3) covers an IC Card Reader.
Barcode scanner (optional) When looking at your tablet screen in the upright position (fingerprint reader at top), the barcode reader is located just above the power button on the right side of the tablet. The barcode scanner is a sub-miniature area imager engine optimized for barcode reading. The engine captures digital images of a barcode for transmission to a decoder to decode a 1D or 2D barcode of any format supported by the decoding software.
Touch screen Touch screen The Chameleon 8 Single display panel with high brightness and high contrast is visible under strong sunlight or in outdoor environments. Your tablet has a 8” capacitive multi-touch display. You can touch the screen to operate the tablet. Avoid direct sunlight when possible to avoid overheating. Your tablet screen is tough and scratch resistant, but direct impact of sharp objects and abrasive materials could cause damage and leave marks. Always handle with care.
Gesture Zoom in - Gesture Action Function Enlarge the view of an image or web page Zoom out - Reduce the view of an image or web page Rotate - Rotate an object by 90 degree Right-click To perform a right-click on your tablet, Touch and Hold your finger for 2 seconds on any section of the screen or an icon and then release your finger. Front camera & light The front auto-focus camera and LED light is located on the top right side of the touch screen.
Hand straps Iris scanner The single iris camera with near infrared illumination is located in the center above the battery cover on the backside of the device. This scanner can be used indoors and outdoors. The optimal distance from eye to scanning window is 14cm. The iris scanner can be activated using the software on the tablet. Once activated, the camera will automatically capture the iris image when aligned with the eye and within range.
Kensington lock Fingerprint scanner The Chameleon 8 device comes standard with a Kensington lock slot. You can use a Kensington-type cable lock to secure your tablet against theft. The Chameleon 8 Single can accommodate 1 or 2 single optical fingerprint scanners. Each fingerprint scanner is FBI PIV and Mobile ID FAP20 certified to ensure fast high quality image capture. Protected by Kensington® lock compatibility The fingerprint sensor is software activated and will illuminate red when ready for use.