Ver. 1.1.2 H.264 Video Compression Digital Video Recorder User Guide About This User Guide Before operating the unit, please read this user guide thoroughly and retain it for future reference.
Warning Cautions 1. Read User Guide – After unpacking this product, please read the user guide carefully, and follow all the operating and other instructions. 2. Power Sources – This product should be operated only from the type of power source indicated on the label. If not sure of the type of power supply, consult with the product dealer. 3.
Notes Handling Please retain the original shipping carton and/or packing materials supplied with this product. To ensure the integrity of this product when shipping or moving, repackage the unit as it was originally received. Do not use liquids, such as aerosol spray, near this product. Do not leave rubber or plastic objects in contact with this product for long periods of time. The product may become warm after long periods of use. Locating Place the unit on a level surface.
Contents 1. Product Components.............................................................................................................................. 8 2. Features .................................................................................................................................................. 9 3. Specifications........................................................................................................................................ 10 3-1.
8-2. RECORD Setup ............................................................................................................................... 31 8-3. DEVICE Setup ................................................................................................................................. 33 8-5. STORAGE Setup ............................................................................................................................. 35 8-6. SYSTEM Setup...............................................
12-5-2. Full Screen Display ............................................................................................................... 70 12-5-3. Playback Buttons.................................................................................................................. 71 12-5-4. Timeline Bar ......................................................................................................................... 71 12-5-5. Backup...................................................................
15-1-3. Playback ............................................................................................................................... 94 15-2. Viewer for Android Phone........................................................................................................... 95 15-2-1. Live/Playback .......................................................................................................................
1. Product Components Please make sure the following components are included as specified below. DVR Set Client Software CD, User Guide Remote Control , Battery1.
2. Features • H.264 video compression • QUADPLEX: Simultaneous live or playback while recording, network transfer, and backup • USB 2.
3. Specifications Please note that specifications and unit exterior design are subject to change without notification 3-1. VVR4004SEFD, VVR4008SE, VVR4016SE Model VVR4004SEFD VVR4008SE VVR4016SE Recording Performance D1 * 120FPS CIF * 240FPS CIF * 480FPS 4 channels 8 channels 16 channels Channel Input Input Level Composite, 1.0Vp-p, 75ohm VGA 1 VGA (Max.
USB External HDD Video & Still Image Network Video & Still Image USB Port 2 (Front 1, Rear 1) Menu Display GUI Input Method Mouse, Remote control PTZ control - Termination - Console (RS-232C) - Dynamic DNS Yes Network Interface 10/100 base-TX Ethernet (RJ-45) User I/F Serial Network Network Streaming Network Access CIF @ 60fps CIF @ 120fps Web viewer (1:1) Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade, Two Way Audio 3G Mobile Viewer (1:1) Live, Search, PTZF, Two Way A
Alarm Sensor Input 4ch (NC/NO Selectable) Alarm Output 1 Alarm out Compression H.
DLS (Day Light Saving) Yes Internal Beep By Alarm, Motion, Video Loss, HDD error S/W Upgrade USB Flash drive, Remote Network NTP Yes Power Supply Voltage DC 12V 5A Features Power Allowable operation temperature 5°C - 40°C Allowable operation humidity 0 - 90 % Weight Unit Weight (Gross weight) 3 Lbs (4.6 Lbs) Dimension Unit Dimension (W x H x D) 14.96" x 13.38" x 2.83" 3-3.
HDD Playback Speed x1/4 ~ x64 Search Mode Timeline, Event, Archive, Log Interface Type Serial ATA I Capacity of 1 HDD 3TB Internal HDD Number 2EA (3EA without DVD-RW) ESATA Storage Backup USB Flash drive Video & Still Image USB External HDD Video & Still Image Network Video & Still Image USB Port 2 (Front 1, Rear 1) Menu Display GUI Input Method Mouse, Front Buttons, Remote control, Key Board PTZ control 1 RS-485 Termination - Console (RS-232C) 1 (for Development use only, Reser
Audio HDMI 1 HDMI (Max. 1080p) HD-SDI - LOOP 16 channels BNC 1 channel SPOT 4 channel Input & Output 16 Line input & 1 Line output Audio Codec G.711 (ADPCM) Sensor Input 16ch (NC/NO Selectable) Alarm Output 4 Alarm out Compression H.
Network Access Network Interface 10/100/1000 base-TX Ethernet (RJ-45) Network Streaming CIF/D1 @ 480fps Web viewer (1:1) Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade, Two Way Audio 3G Mobile Viewer (1:1) Live, Search, PTZF, Two Way Audio MAC viewer (1:1) Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade Multi-sites Monitoring SW (1:n) Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade, Two Way Audio DLS (Day Light Saving) Yes Internal Beep By Alarm, Motion, Video Los
Resolution 1920X1080 20fps 40fps 80fps Recording quality grade 5 Grades Recording Mode Continuous/Schedule/Motion/Sensor/Manual Motion Detection Motion detection setup by Grid Recording by channel’s Resolution Yes Pre Recording Min. 15 seconds and Max. 20 minutes Post Recording Min. 10 seconds and Max.
Allowable operation humidity 0 - 90 % 0 - 90 % Weight Unit Weight (Gross weight) 9 Lbs (13.6 Lbs) 15.0 Lbs (19.8 Lbs) Dimension Unit Dimension (W x H x D) 14.96" x 13.38" x 2.83" 17.00" x 16.92" x 3.86" 3-6. VVRHHD1002D Model VVRHHD1002D Recording Performance Analog: D1 Real time HD: 720P * 60FPS / 1080P * 30FPS Channel 10 channels Input Level 8 CH Composite, 1.0Vp-p, 75ohm & 2 CH HDcctv/HD-SDI VGA 1 VGA (Max. 1080p) HDMI 1 HDMI (Max.
ESATA Backup User I/F Serial Network Network Access Features Power 1 USB Flash drive Video & Still Image USB External HDD Video & Still Image Network Video & Still Image USB Port 2 (Front 1, Rear 1) Menu Display GUI Input Method Mouse, IR Remote control, Key Board Control PTZ control 2 RS-485 Termination 2 Console (RS-232C) 1 (for Development use only) Dynamic DNS Yes Network Interface 10/100/1000 base-TX Ethernet (RJ-45) Network Streaming 640*360 / 1280*720 @ 120fps Web view
4. Front Panel Controls 4-1. VVR4004SEFD, VVR4008SE, VVR4016SE VVR4004SEFD, VVR4008SE VVR4016SE 1 2 3 Recording Indicator Indicator LED when a specific CHANNEL is recording. Power Indicator Indicator LED when DVR is powered ON. USB Port Allows the user to connect a USB mouse or USB flash drive for BACK UP. 4-2. VVR4004HMFD, VVR4008HM, VVR4016HM, VVR4008HFD, VVR4016HFD 1 2 3 Optical Drive Door Camera Selection Allows the user to select specific channels for single channel view.
4 5 6 7 8 9 10 11 12 13 Allows the user to change playback settings, set manual RECORDING, and enter PLAYBACK mode. Escape (ESC) Exit from current menu or stop playback. Eject Ejects optical drive disc tray. Recording Indicator Indicator LED when a specific CHANNEL is recording. Setup Allows the user to enter the SETUP menu. Sequence Allows the user to Enable/Disable Sequence in LIVE MODE. PTZ Allows the user to enter the PTZ menu. Backup Allows the user to capture a snapshot during LIVE MODE.
6 7 8 9 10 11 12 13 Allows the user to select specific channels for single channel view. Playback Buttons Allows the user to change playback settings, set manual RECORDING, and enter PLAYBACK mode. Sequence Allows the user to Enable/Disable Sequence in LIVE MODE. PTZ Allows the user to enter the PTZ menu. Setup Allows the user to enter the SETUP menu. Backup Allows the user to capture a snapshot during LIVE MODE. Indicator LED Indicator LED blinks for HDD, ALARM, NETWORK, BACK UP, and POWER.
5-2. VVR4004HMFD, VVR4008HM, VVR4016HM, VVR4008HFD, VVR4016HFD 1 2 3 4 5 6 7 8 9 10 11 Cooling Fan Video Input & Video Output Audio Input HDMI Video Output RS 232 Terminal (For testing purposes) VGA Output eSATA Port Network RS-45 Ethernet Port USB Port RS-485 PTZ Camera control terminal DC12V Power Input 5-3.
5-4.
1 2 3 4 5 6 7 8 9 10 11 12 13 Video Input & Loop Out Video Output Audio Input RS 232 Terminal (For testing purposes) VGA Output HDMI Output USB Port RS-485 PTZ Camera control terminal Network RS-45 Ethernet Port eSATA Port RS-485 Termination Sensor In terminal DC12V Power Input Page 25
6.
7. Connection Guide 7-1. Connecting the Monitor There are three available monitor outputs on the DVR. High-Definition Multimedia Interface – HDMI (Not for VVR4004SEFD, VVR4008SE, VVR4016SE) Video Graphics Array – VGA Mini-Sub D15 Composite Monitor Output – BNC HD-SDI Monitor Output – BNC (For VVRHD1620M only) 7-2. Video Inputs The DVR comes with 4/8/16 BNC video inputs on the rear of its chassis. The HD DVR only accepts HD-SDI Cameras. 7-3.
7-8. Setting the Remote Controller ID When more than one HD DVR is installed in the same location, it is possible to use one remote controller to control multiple DVRs – up to 99 DVRs. To control multiple DVRs, the remote controller ID and the DVR remote control ID must match. To change the remote controller ID: 1. Press ID. 2. Input the ID number. To change the DVR remote controller ID: 1. Enter SETUP. 2. Select DEVICE. 3. Highlight REMOTE CONTROL ID and use the arrow keys to change the ID. 7-9.
8. SETUP MENU Use the setup menu to configure all of the DVR settings, schedule recording, and networking. To enter SETUP, press the SETUP button on the front of the DVR or remote control or by using the mouse. RIGHT CLICK to open the SUB MENU. LEFT CLICK SETUP and enter the USER PASSWORD using the VIRTUAL KEYBOARD.
8-1.
NOTE: Recording will stop for a few seconds after applying the CHANNEL NAME change. o NAME – Press CONFIRM on the WARNING prompt window to enter the VIRTUAL KEYBOARD. Using the VIRTUAL KEYBOARD, enter the desired CHANNEL NAME and press OK to apply the changes. o COVERT – ON/OFF (Allows the user to turn ON/OFF COVERT for the highlighted CHANNEL) VIDEO OUTPUT (HDMI/VGA) – 720p 50Hz/60Hz, 1080i 50Hz/60Hz, 1080p 50Hz/60Hz (Allows user to set monitor output resolution) 8-2.
o QUALITY – LEVEL 1 ~ LEVEL 5 (Allows the user to change the recording QUALITY of the selected CHANNEL) o RECORDING – CONTINUOUS, MOTION, SENSOR, SCHEDULE, DISABLE (Allows the user to change the RECORDING type of the selected CHANNEL) o SENSOR RECORDING – Allows the user to set up to 4 sensors for selected CHANNEL.
8-3. DEVICE Setup ALARM-OUT – SENSOR, MOTION, VIDEO LOSS, HDD ERROR (Allow the user to set ALARM-OUT relay) o o o o ALARM-OUT – Allows the user to select a specific alarm output terminal SENSOR IN – Allows the user to set ALARM-OUT when SENSOR-IN is triggered. MOTION ON – Allows the user to set ALARM-OUT when MOTION is triggered. VIDEO LOSS ON – Allows the user to set ALARM-OUT when VIDEO LOSS is detected.
- ALL – ALARM-OUT enabled when HDD ERROR or VIDEO LOSS is detected. - HDD ERROR – ALARM-OUT enabled when HDD ERROR is detected. - VIDEO LOSS – ALARM-OUT enabled when VIDEO LOSS is detected.
NOTE: Camera noise will be detected as MOTION depending on MOTION SENSITIVITY. KEY TONE – OFF, ON (Allows the user to turn KEY TONE OFF or ON) REMOTE CONTROL ID – 00 ~ 99 (Allows the user to set REMOTE CONTROL ID) SENSOR – 1 ~ 4 (Allows the user to select SENSOR Number) o TYPE – OFF, NORMAL OPEN, NORMAL CLOSE (Allows the user to set SENSOR TYPE) 8-5.
NOTE: The user will not be able to recover the RECORDED DATA from a formatted HDD. FORMAT- Select the HDD to format and select YES to FORMAT the HDD.
HELP – Displays S.M.A.R.T HELP information. RECORDING LIMIT – OFF, ON (Allows the user to set the RECORDING LIMIT) o RECORDING LIMIT DAYS – 1 DAY ~ 90 DAYS (Allows the user to set RECORDING LIMIT DAYS) S.M.A.R.T – ON, OFF (Allows the user to set S.M.A.R.
8-6. SYSTEM Setup DVR ID – Allows user to change the DVR ID DESCRIPTION – Displays the following system information; HARDWARE VERSION, SOFTWARE VERSION, STORAGE SIZE, IP ADDRESS, MAC ADDRESS, DDNS STATUS LANGUAGE – ENGLISH, FRENCH, GERMAN, JAPANESE, CHINESE (Allows the user to change the LANGUAGE setting) DATE FORMAT – Allows the user to change the DATE FORMAT display from the following; YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY.
NTP – Allows the user to set the following options; PRIMARY SNTP SERVER, SECONDARY SNTP SERVER, TIME ZONE, CONNECTION MODE (TIME, INTERVAL), CONNECTION PERIOD o PRIMARY SNTP SERVER – PRIMARY SNTP (Simple Network Time Protocol) SERVER o SECONDARY SNTP SERVER – SECONDARY SNTP (Simple Network Time Protocol) SERVER o TIME ZONE – Allows the user to set the TIME ZONE o CONNECTION MODE – INTERVAL, TIME, ONCE (Allows the user to select the SNTP CONNECTION MODE) - INTERVAL – Synchronize SNTP EVER 1 HOUR ~ 24 HOU
SEND EMAIL – Allows the users to set the following options; TRANSMISSION MODE, IP NOTIFICATION, EVENT ALARM, S.M.A.R.T, MAIL PORT, SECURE OPTION, MAIL TO, MAIL SERVER, ID, PASSWORD, MAIL FROM. o TRASMISSION MODE – IMAGE (Transmits an IMAGE of the triggered ALARM-OUT CHANNEL) or Text o IP NOTIFICATION – OFF, ON (Allows the user to set IP NOFICIATION ON or OFF) - OFF – Disable IP NOTIFICATION when the DVR IP ADDRESS is changed. - ON – Enable IP NOTIFICATION when the DVR IP ADDRESS is changed.
8-7. SECURITY Setup USER AUTHENTICATION – Allows the specific users to access a function. - SETUP – Allow or Deny specific user to enter SETUP. - PB – Allow or Deny specific user for PLAYBACK. - PTZ – Allow or Deny specific user for PTZ Control. - R/OFF – Allow or Deny specific user to change RECORD settings. - NET – Allow or Deny specific user for NETWORK access. USER PASSWORD – Allows the user to change the password.
o USER PASSWORD – Enter the following information to change the USER PASSWORD; USER, CURRENT, NEW, CONFIRM. PLAYBACK AUTHORITY – Allows specific users AUTHORITY OF PLAYBACK per CHANNEL. NETWORK LIVE AUTHORITY– Allows specific users to view selected channels or block the view of selected channels.
8-8. NETWORK Setup PORT – NETWORK PORT (Allows the user to change the DVR PORT) NETWORK AUDIO PORT - Set the port for the audio data. Default is 5446 and it has to be the next number of the DVR port. NOTE: The DEFAULT PORT is used as a primary port to create remote connections.
o SERVER 2 – Allows the user to user a specific DDNS Server. o DDNS SERVER NAME – Allows the user to enter the specific DDNS Server NAME. o DDNS ID – Allows the user to enter specific DDNS ID. o DDNS PASSWORD – Allows the user to enter specific DDNS PASSWORD. o DDNS INTERVAL – 5 MINUTES ~ 60 MINUTES (Allows the user to set DDNS INTERVAL) NETWORK STREAM – Allows the user to set the following NETWORK STREAM settings; RESOLUTION, FRAME RATE, QUALITY per CHANNEL.
8-9. CONFIG Setup SAVE SETUP TO A USB – Allows the user to SAVE SETUP TO A USB. LOAD SETUP FROM A USB – Allows the user to LOAD SETUP FROM A USB.
LOAD DEFAULT – Allows the user to LOAD DEFAULT settings. LOAD FACTORY DEFAULT – Allows the user to LOAD FACTORY DEFAULT settings.
9. OPERATION 9-1. Live Display Mode A live image can be selected by pressing the corresponding number key on the DVR front panel or remote control or mouse. Depending on the model of the DVR, the LIVE DISPLAY MODE will be different. Double LEFT CLICK the video image to change views. 9-2. Icons In Live Display Mode, icons on the screen indicate the system mode or status. All icons appear on the bottom of the screen. NOTE: The control bar will auto-hide over time.
Indicates SENSOR RECORDING is in progress. Indicates DVR is LOCKED or UNLOCKED. Indicates AUDIO is RECORDING OR MUTED. Indicates ALARM-OUT is set. Indicates the ALARM-OUT is activated. Indicates the EVENT has been trigged. Indicates that a network client is connected to the DVR. Indicates SEQUENCE is ON OR OFF. NOTE: MANUAL RECORDING will overwrite any recording settings and will RECORD CONTINOUSLY. NOTE: If no REMOTE CONTROL ID is set, R:A will be displayed (REMOTE:ALL) 9-3.
TIMELINE – Allows the user to playback using the TIMELINE BAR. NOTE: DATES with RECORDED DATA are displayed in blue. TIMELINE BAR – Allows the user to find the specific hour and minutes for PLAYBACK. To change the TIMELINE BAR from HOURS to MINUTES, LEFT CLICK the upper right hand corner.
EVENT – Allows the user to PLAYBACK from a triggered EVENT. Select the CHANNEL and TYPE of EVENT triggered to open the EVENT LOG. - M – MOTION S – SENSOR R – MANUAL RECORDING C – CONTINOUS Left Click on an EVENT list to PLAYBACK the triggered EVENT. GO TO FIRST TIME – Allows user to PLAYBACK the FIRST RECORDED DATA. GO TO LAST TIME – Allows user to PLAYBACK the LAST RECORDED DATA. GO TO SPECIFIC TIME – Allows user to PLAYBACK from a SPECIFIC TIME.
ARCHIVE – Allows the user to View ARCHIVED BACKUPS. ARCHIVE – Left Click a DATE to display the ARCHIVE LOG. From the ARCHIVE LOG, SELECT the ARCHIVE BACKUP EVENT to open the BACKUP WINDOW. In the BACKUP WINDOW, Select the BACKUP DEVICE (USB STICK, DVD-RW) and Left Click BACKUP to start the BACKUP PROCESS. LOG – Allows the user to view the EVENT LOG. LOG – Left Click a DATE to open the LOG LIST window. The LOG LIST will display LOG(s) RECORDED from any triggered EVENTS.
9-4. Playback - 1 CH SPLIT – Allows the user to switch to 1 CH Full screen. 4 CH SPLIT – Allows the user to switch to 4 CH SPLIT. 8 CH SPLIT – Allows the user to switch to 8 CH SPLIT. 16 CH SPLIT – Allows the user to switch to 16 CH SPLIT. ◀◀ --◀ REW – x1, x2, x4, x8, x16, x32 (Allows user to REWIND during PLAYBACK) F/REW – 1 MINUTE, 1 SECOND (Allows user to REWIND 1 MINUTE during PLAYBACK and 1 SECOND when PAUSED) ▶/ II PLAY/PAUSE – Allows user to PLAY or PAUSE during PLAYBACK.
9-5.Backup LEFT CLICK the BACKUP icon to open the BACKUP Window during PLAYBACK. 1. ARCHIVE – Still Image, ASF, AVI (Allows user to select BACKUP type) o STILL IMAGE – BACKUP STILL IMAGE. o NSF – BACKUP in NSF FORMAT. o AVI – BACKUP in AVI FORMAT. 2. SELECT MEDIA TYPE – USB STICK, USE DVD-RW, USE HDD (HUGE BACKUP) o USB DRIVE – BACKUP to a USB STICK. o USE HDD (HUGE BACKUP) – BACKUP to an EXTERNAL HDD. o USE DVD-R – BACKUP to a DVD-R. 3.
4. In the CHANNEL BACKUP Window, select the appropriate CHANNELS and SET the DURATION and Left Click YES to start the BACKUP process. NOTE: USB STICK and DVD-R MEDIA TYPE will only be available to BACKUP in MINUTES. USE HDD BACKUP will only be available to BACKUP in HOURS. o CHANNEL – Allows the user to select SPECIFIC CHANNELS for BACKUP. o DURATION – Allows the user to set the DURATION of BACKUP. 9-6.Backup data playback 9-6-1.
2. Otherwise, the video and time stamp over video can’t be properly playback and displayed on Window Media Player™. 9-6-2. NSF Format - HD Player NSF format: NSF format video can be played back using the HDplayer that the DVR copies to “DvrPlayer” folder on USB flash drive with video. Use the mouse scroll to use digital zoom in and out feature.
9-7.PTZ Control INITIALIZE – Initialize the PTZ setting on the selected CHANNEL. PAN / TILT – PAN / TILT the selected CHANNEL PTZ. ZOOM / FOCUS – ZOOM / FOCUS the selected CHANNEL PTZ. OSD – Select OSD to enter the PTZ menu. AUTOSCAN – Allows the user to ENABLE / DISABLE AUTOSCAN. PRESET – Allows the user to select PTZ PRESET. TOUR – Allows the user to select PTZ TOUR. NUMBER – Allows the user to select PTZ TOUR or PTZ PRESET NUMBER.
10. Remote Setup Remote Setup Access from CMS: Select REMOTE SETUP button. Remote Setup Access from WEB VIEWER: Select SETUP button. Remote Setup Access from Single Client VIEWER: RIGHT-Click over live display and select REMOTE SETUP button. Then the setup window is displayed. The specified menu screen is displayed on the upper left of the screen. Setting is the same as with the DVR menu setting. Refer to the corresponding pages for details on the setting items.
10-1. DISPLAY OSD – ON/OFF (Turn ON/OFF the On Screen Displays) OSD CONSTRAST – 50 ~ 100 (Set the transparency of the setup window) SEQUENCE – ON/OFF (Turn ON/OFF the Sequence) SEQUENCE-DWELL TIME – 3 ~ 60 SECONDS (Set the SEQUENCE-DWELL TIME) CHANNEL – CH 1 ~ CH 16 (Select the channel to make adjustments) o NAME – Allows the user to change the default CHANNEL NAME. o COVERT – ON/OFF (Allows the user to turn ON/OFF COVERT for the highlighted CHANNEL) 10-2.
o QUALITY – LEVEL 1 ~ LEVEL 5 (Allows the user to change the recording QUALITY of the selected CHANNEL) o RECORDING – CONTINUOUS, MOTION, SENSOR, SCHEDULE, DISABLE (Allows the user to change the RECORDING type of the selected CHANNEL) o SENSOR RECORDING – Allows the user to set up to 4 sensors for selected CHANNEL.
o SPEED – Allows the user to select CONTROLLER SPEED o ID – Allows the user to select CONTROLLER SPEED CAMERA PTZ – Allows the user to select PTZ CAMERA CHANNEL o NAME – Allows the user to select PTZ protocol o SPEED – Allows the user to set PTZ SPEED o ID – Allows the user to select PTZ ID MOTION o CHANNEL – CH 1 ~ 16 (Allows the user to select CHANNEL for MOTION setting) o MOTION ZONE – FULL ZONE, PARTIAL ZONE (Allows the user to select MOTION ZONE) o MOTION SENSITIVITY – 1 ~ 9 (Allows the use
10-5. SYSTEM DVR-ID – Allows the user to change the DVR ID DATE FORMAT – Allows the user to change the DATE FORMAT display from the following; YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY.
o MAIL PORT – 1 ~ 99 (Allows the user to set E-MAIL PORT) o SECURE OPTION – NONE, SSL, TLS (Allows the user to select E-MAIL SECURE OPTION) o MAIL TO – Recipient’s email address. o MAIL SERVER – Outgoing mail server address. o ID – Outgoing mail address. o PASSWORD – Outgoing mail password. o MAIL FROM – Sender’s name. 10-6. NETWORK PORT – NETWORK PORT (Allows the user to change the DVR PORT) NOTE: The DEFAULT PORT is used as a primary port to create remote connections.
o DDNS SERVER 2 NAME – Allows the user to user a specific DDNS SERVER. o DDNS SERVER 2 ID – Allows the user to enter specific DDNS ID. o DDNS SERVER 2 PASSWORD – Allows the user to enter specific DDNS PASSWORD. o DDNS SERVER 2 INTERVAL – 5 MINUTES ~ 60 MINUTES (Allows the user to set DDNS INTERVAL) NETWORK STREAM – Allows the user to set the following NETWORK STREAM settings; RESOLUTION, FRAME RATE, QUALITY per CHANNEL.
11. DDNS Registration DDNS (Dynamic Domain Name System) allows a domain name to be constantly synchronized with a dynamic IP address. It allows using a dynamic IP address to be associated with a static domain name. Once the setting is completed, the DDNS address will be: http://hostname.microcamddns.com For example, if you enter the host name as “vvr4004xxxx”, then the address will be: http://vvr4004xxxx.microcamddns.com 1. Right-click a mouse over the live screen to open Sub Menu. 2.
4. Set DDNS as SERVER1 and click button. Then EASY DDNS menu will display. Automatic Host name registration i. Click AUTO button. Then the MAC Address of DVR will be registered automatically as a host name on DDNS. Manual Host name registration i. Click button. Then the keyboard window will display. 5. After an exit from SETUP menu, the bellow DDNS NOTIFY window will display.
6. In order to check the DDNS connection status, Right-click of mouse over the live screen and select SYSTEM INFORMATION. 12. NETWORK VIEWER 12-1. PC System Requirement Minimum System Requirements o o o o o o o o Windows XP, Windows 7 Operating System Intel Dual Core 2.0 Ghz Processor 2GB RAM 256 MB+ nVidia or ATi Video Card DirectX 9.
2. Select a destination folder and click “NEXT” 3. Select the Program Folder and click “NEXT” 4. The installation Process will begin. 5. After the installation is completed, “Microcam Single Client” icon will be displayed on the desktop. 12-3. Live Mode 1. Right click on live streaming image and select either Main Streaming or Sub Streaming. Main Streaming option streams the actual recording quality video, and Sub streaming option streams at “Dual streaming” quality in Network menu.
CONNECT/DISCONN ECT SEARCH Connect or Disconnect network connection Switches to SEARCH MODE DISPLAY MODE Allows the user to select a CHANNEL or change the DISPLAY MODE Allows the user to control the PTZ camera PTZ SCAN Allows the user to scan the PTZ camera TOUR Allows the user to tour the PTZ camera MENU Allows the user to open the PTZ menu CAPTURE Capture a still image from LIVE MODE PAUSE Pause the frame during LIVE MODE BACKUP Backup video from LIVE MODE PRESET Allows user to change th
12-4.
PLAYBACK BUTTONS Playback buttons DISPLAY MODE Allows the user to select a CHANNEL or change the DISPLAY MODE NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing. 12-5. Operation 12-5-1. Digital Zoom Digital Zoom allows the user to digitally zoom into any area during single channel viewing. Use the mouse scroll to digitally zoom in and zoom out. Digital zoom is available in both LIVE MODE and SEARCH MODE. NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing. 12-5-2.
A single CHANNEL can be displayed in FULL SCREEN by selected FULL SCREEN in the SUB MENU. The SUB MENU can be opened by right clicking on a specific CHANNEL. NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing. 12-5-3.
12-5-5. Backup 1 CAPTURE – Allows the user to CAPTURE a still image. 2 MARK IN – Allows the user to set the starting time for video BACKUP. 3 MARK OUT – Allows the user to set the ending time for video BACKUP. 4 BACKUP – Allows the user to BACKUP the selected data.
12-6. Local Setup 12-6-1. General SECURITY OPTION o STARTUP – Allows the user to enter a password during UMS STARTUP. o SHUTDOWN – Allows the user to enter a password during UMS SHUTDOWN. o SEARCH – Allows the user to enter a password during SEARCH. o LIVE MONITORING – Allows the user to enter a password during LIVE MONITORING. o SETUP – Allows the user to enter a password during SETUP.
SAVE PATH o CAPTURE – Allows the user to change the CAPTURE SAVE PATH. o BACKUP – Allows the user to change the BACKUP SAVE PATH. MISCELLANEOUS o DISPLAY NETWORK STATISTICS – Allows the user Enable or Disable DISPLAY NETWORK STATISTICS. o AUTOMATIC RECONNECTION – Allows the user to Enable or Disable AUTOMATIC RECONNECTION. o TIME FORMAT – Allows the user to change the DATE FORMAT display from the following; YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DDYYYY, DD-MM-YYYY. 12-6-2.
o o o o o o SITE NAME – Allows the user to enter the specific SITE NAME. IP ADDRESS – Allows the user to enter the specific IP ADDRESS. PORT NO. – Allows the user to enter the specific PORT NO. ID – Allows the user to enter the specific ID. PASSWORD – Allows the user to enter the specific PASSWORD. CHANNELS – Allows the user to select the DVR CHANNELS. o DISPLAY DEVEICE CHANNEL NAME – Allows the user to Enable or Disable the DISPLAY DEVICE CHANNEL NAME.
12-6-3. Event PATH – Allows the user to change the LOG SAVE PATH. SIZE – Allows the user to set the LOG SIZE. EVENT – Allows the user to set the EVENT LOG, ICON, EVENT LIST.
12-6-4. Event Search FROM – Allows the user to set the FIRST DATE and TIME for EVENT SEARCH. TO – Allows the user to set the LAST DATE and TIME for EVENT SEARCH. FIND – Allows the user to FIND the EVENT SEARCH for the selected DATE and TIME. PATH – Allows the user to change the EVENT SEARCH LOG path. SAVE – Allows the user to SAVE the EVENT SEARCH LOG. 12-6-5.
RECORD CONDITION – ALWAYS, EVENT, AUTO RECORD (Allows the user to set the RECORD CONDITION) o ALWAYS – Allows the user to ALWAYS RECORD when CONNECTED to a SITE. o EVENT – Allows the user to RECORD when an EVENT is TRIGGERED. o AUTO RECORD – EVENT – Allows the user to set the EVENT RECORD CONDITION. o MOTION – Enable or Disable MOTION EVENT for RECORD CONDITION. o ALARM – Enable or Disable ALARM EVENT for RECORD CONDITION.
12-6-7.Display SECONDARY MONITOR IMAGE CORRECTION – Allows the user to ENABLE or DISABLE SECONDARY MONITOR IMAGE CORRECTION when using a secondary monitor.
13. CMS 13-1. PC System Requirement Minimum System Requirements Windows XP, Windows 7 Operating System Intel Dual Core 2.0 Ghz Processor 2GB RAM 256 MB+ nVidia or ATi Video Card DirectX 9.0C or Higher Disk Space 1 GB Mbps Download / 768 Kbps Upload Network Connection 1280x1024 Resolution Monitor Recommended System Requirements Windows XP, Windows 7 Operating System Intel Quad Core 2.0 Ghz Processor 4GB RAM 512 MB+ nVidia or ATi Video Card DirectX 9.
13-2. Live Mode Button Function Description GROUP Allows the user to select and manage a group. CONNECT to selected SITES DISCONNECT from selected SITES Playback recorded data on remote DVR LIVE SEARCH DEVICE Allows the user to access remote DVR for remote setting.
13-3. Operations 13-3-1. Group Management 1. Click 2. Click button. Then MANAGEMENT window will display. button to add new site. 3. Input the proper site information. 4. Click button. Then “Group-1” will be generated. 5. Click the site on SAVED SITES and the group on GROUPS.
6. Click 7. Click to add the site to the group. button to apply. 13-3-2. Connection 1. Click button. 2. Group window will show the connection process status. The icon color of connected site and channel will changed in to Green . 3. Click and hold the connected site or channel and drag over live display window. 4. The selected site will be connected.
13-3-3. Playback 1. Select the site from GROUP window 2. Click button. Then Remote Search Widow will display. 3. Select the target date and time. And click button to playback.
13-3-4. Setup 1. Select the site from GROUP window 2. Click button. Then Remote Setup Login Widow will display. 3. Enter the password. Then the setup menu will display.
14. Web Client 14-1. PC System Requirement Minimum System Requirements Windows XP, Windows 7 Operating System Intel Dual Core 2.0 Ghz Processor 2GB RAM 256 MB+ nVidia or ATi Video Card DirectX 9.0C or Higher Disk Space 1 GB Mbps Download / 768 Kbps Upload Network Connection 1280x1024 Resolution Monitor Recommended System Requirements o o o o o o o o Windows XP, Windows 7 Operating System Intel Quad Core 2.0 Ghz Processor 4GB RAM 512 MB+ nVidia or ATi Video Card DirectX 9.
14-3.
MENU Allows the user to open the PTZ menu CAPTURE Capture a still image from LIVE MODE PAUSE Pause the frame during LIVE MODE PRESET Allows the user to change the PTZ Preset SETUP Opens the SETUP MENU HDD USAGE Displays the current HDD Usage Status Displays real time FPS and BitRate Allows the user to ADJUST the AUDIO volume NETWORK BANDWIDTH AUDIO LOG Displays the EVENT LOG, DATE and TIME DIGITAL ZOOM Allows the user to DIGITAL ZOOM during LIVE MODE and SEARCH MODE NOTE: DIGITAL ZOOM is onl
14-4.
SEARCH CALENDAR The calendar displays recorded data in blue TIMELINE BAR TIMELINE BAR of recorded data is displayed in blue Playback the buttons PLAYBACK BUTTONS DISPLAY MODE DIGITAL ZOOM Allows the user to select a CHANNEL or change the DISPLAY MODE Allows the user to DIGITAL ZOOM during LIVE MODE and SEARCH MODE NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing.
14-5. Operations 14-5-1. Digital Zoom Digital Zoom allows the user to digitally zoom into any area during single channel viewing. Use the mouse scroll to digitally zoom in and zoom out. Digital zoom is available in both LIVE MODE and SEARCH MODE. NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing. 14-5-2.
14-5-3. Web Client Backup 1. CAPTURE – Allows the user to CAPTURE a still image. 2. MARK IN – Allows the user to set the starting time for video BACKUP. 3. MARK OUT – Allows the user to set the ending time for video BACKUP. 4. BACKUP – Allows the user to BACKUP the selected data. 15. Smartphone Viewer App 15-1. Viewer for iPhone 1. Enter the Apple App Store. 2. Search “Microcam” in the App Store.
15-1-1. Live 1. Open the “Microcam” App has been installed, select the “+” to add a device. 2. Select the registered device and select “Live” or Playback” and select “Connect” . 3. The app will display all channels when connected to the device. Double tap the screen to switch to a 1 channel display or vice versa to return to the previous display mode. 15-1-2.PTZ Control To control the PTZ functions of the camera, tap the menu button. Then PTZ menu icons will display.
15-1-3. Playback 1. Select the registered device and select the channels up to 4 channels to search and playback. Select Mode as ‘Playback’ display. and click ‘Connect’ . Then the search window will 2. Select the date, hour, minute, AM/PM and click ‘Connect & Play’ 3. The app will display the selected channel(s). Page 94 .
4. Tap the menu button. Then Playback menu icons will display. 15-2. Viewer for Android Phone 1. Enter the Android Google Play Store. 2. Search “Microcam” in the Android Market and install the app. 15-2-1. Live/Playback 1. Open the installed “Microcam” App and select the “Live View / Playback”. Then click the menu button of the phone to add a remote device. 2. Select the registered device and select the channels to monitor up to 4 channels. Then press SELECT button. 3.
4. To control the PTZ function of the camera, tap the channel screen, then the channel name will be highlighted in Yellow. Using the PTZ menu icons on the screen, control PTZF control.
