Instructions

ManualsBrandsVOLTCRAFT ManualsFunction GeneratorsMains-powered FG-2502 1uHz - 50 MHz 2-channel Arbitrary, Noise, Pulse, Rectangle, Sinus, Triangle, Waveform Manufacturer

PC Software USB Driver Install Guide

Use the supplied USB cable to connect the oscilloscope with a PC through their USB ports.

Note: If you use a USB cable that is not supplied by us, some problems such as connection error and signal disturbing might occur.

Install Guide for Windows 10\Windows 8\Windows 7\Windows Vista

The Microsoft Windows Systems such as Windows 10\Windows 8\Windows 7\Windows Vista, change a lot, which require a new installation guide of USB driver. Here it is.

During the whole installation, please assure that the device is running well and plugged into PC from USB.

Right click [Computer], you can find it on the desktop, or in [Start] menu.

In the pop up menu, click [Manage] and it will open a window named "Computer Management", as follow, in the left side click [Device Manager], it will show a devices tree in

the middle, and then click the last one button "Scan for hardware changes" in tool bar as follow, and if the device is running well and plugged into PC, computer will detect an

unknown device with a "!" icon.

Right click the unknown device icon, in the pop up menu click [Update Driver Software...],

Summary of content (6 pages)

PAGE 1
PC Software USB Driver Install Guide Use the supplied USB cable to connect the oscilloscope with a PC through their USB ports. Note: If you use a USB cable that is not supplied by us, some problems such as connection error and signal disturbing might occur. Install Guide for Windows 10\Windows 8\Windows 7\Windows Vista The Microsoft Windows Systems such as Windows 10\Windows 8\Windows 7\Windows Vista, change a lot, which require a new installation guide of USB driver. Here it is.
PAGE 2
In the open window, select [Browse my computer for driver software]. The next window, select a directory path for the driver software location "USBDRV\win10_win8_win7_vista", and click "Next".
PAGE 3
And finish. Now a successful installation window opens with information "Windows has successfully updated your driver software". Close the window, have a look at the "Computer Management" window, you will find a device under [LibUSB-Win32 Devices], it should be like this: Now the USB driver will work.
PAGE 4
Install Guide for Windows XP\Windows 2000 Notice: for both x86 and x64. Plug into the running well device to open [Found New Hardware Wizard] dialog.
PAGE 5
Select "Install from a list or specific location(Advanced)". Select [Search for the best driver in these locations.
PAGE 6
And complete, And prompt as installed, And show installed in [Device Management], Now you can use the program and use if for USB communication. If there is an early version of USB driver in your computer, you could try running "reinstall.bat" to fix, the file is under the directory of "USBDRV". Oct. 2017 6 V1.