EN Resonance Unplugged Series TRUE WIRELESS EARPHONES WITH CHARGING CASE INSTRUCTION MANUAL Please read and retain these instruction for future references TA-2017 / 2354 Approved VK-1114-BK-593
HIGHLIGHTS • • • • • • • • • Hands-Free Calling Ambient SoundPass Mode True Stereo Sound Independent Earbud Pairing Dual Driver Technology Electro, Pop and Acoustic EQ Modes Works with Siri and Google Assistant Bluetooth® 5.
SPECIFICATIONS • Bluetooth®: Version: 5.0 Chipset: Airoha 1526P Profiles: A2DP, HFP, HSP, AVRCP Range: 10 m / 33 ft • Frequency Response: 20 Hz – 20 kHz • Driver: 2 x 6 mm / 0.24” • Impedance: 16 Ω • Charging Case: Battery: 500 mAh Number of Recharges: 4 Charging Time: 2 Hours • Charge Input: 5 V DC, 1 A • Sensitivity: 98 dB • Battery Capacity: 2 x 50 mAh • Battery Type: Lithium Polymer • Playback Time: 2.5 – 4 Hours • Earbud Charging Time: 1 – 1.
IDENTIFYING PARTS 1. LED Indicator 2. Multifunction Button 3. Microphone 4. Driver #1 5. Driver #2 6. Earbud Cap 7. Charging Contact Points 8. Power Switch for Charging Case 9. Charging Port on Case 10.
INSTRUCTIONS FOR USE: CHARGING THE CASE Please fully charge the Resonance Unplugged’s charging case before first time use. Connect the USB A end of the Charging Cable to a USB Charging Port and insert the Micro USB end to the port on the charging case. Make sure it is properly connected. The LED charge indicator on the charging case will be flashing white when the case is charging and will be a solid white once charging is complete.
CHARGING THE EARPHONES Please fully charge the Resonance Unplugged earphones before use. Place the Earphones into the charging case. A red LED indicator light on each of the earphones will turn on when charging has begun. A blue LED indicator light turns on when charging is complete. Note: Charge time is approximately one (1) hour. Earphones cannot be used while charging. When the battery level is low, you will hear a warning voice message and the red LED indicator light will switch on.
PAIRING WITH BLUETOOTH® DEVICES Your earphones must be paired to a Bluetooth® device before it can be used. It is only necessary to pair your earphones once with each device. Please switch on your earphone(s) before pairing them to your device. 1. Open the Bluetooth® Menu on the device you wish to pair (see “Locating the Bluetooth® Menu” for more details). Some devices require you to select “Search for Devices” or “Add New Device” in order to create a Bluetooth® pairing. 2.
LOCATING THE BLUETOOTH® MENU iPhone, iPad, and iPod Touch: a) On your device, go to Settings. b) Select Bluetooth®. If Bluetooth® is not on, turn it on. c) The iPhone / iPad / iPod will automatically search for new devices. Android™ Phones and Tablets: a) On your device, go to the Settings Menu. b) Select Bluetooth® (on older Android devices Bluetooth® is found in the Wireless and Networks Menu). If Bluetooth® is not on, turn it on.
CONTROLS 1. Audio Control Function Operation Play / Pause Track Short press the Multi-Function Button Next Track Press and Hold the Multi-Function Button on the right earbud for 1 second Previous Track Press and Hold the Multi-Function Button on the left earbud for 1 second Increase Volume Double press the Multi-Function Button on the right earbud Decrease Volume Double press the Multi-Function Button on the left earbud 2.
Function Operation Redial Double press the Multi-Function Button Siri and Google Assistant Press and hold the Multi-Function Button on either earbud for 2 seconds Change EQ Setting Press and hold the Multi-Function Button on either earbud until you hear two beeps.
SAFETY PRECAUTIONS • The product should only be used with the parts provided by the manufacturer. • Never use your Resonance Unplugged near water or in areas where it can come into contact with water. Never handle the Resonance Unplugged if it has been dropped in water or any other liquid. If the product comes into contact with water while still plugged in, this is a safety hazard. • Always make sure your hands are dry before touching the USB cable or power connections.
TROUBLESHOOTING 1. My mobile phone cannot find any new Bluetooth® devices? a. Ensure the device has entered the pairing mode. b. Ensure the device is within an effective working range. 2. Bluetooth® device cannot pair up? Ensure your mobile phone allows new connections and has not reached the maximum number of allowed devices. 3. The device does not play music or answer calls when it is connected to a Bluetooth® mobile phone. a. Ensure your mobile phone supports A2DP and HSF (Hands-Free) profiles. b.
CLEANING AND CARING INSTRUCTIONS • Before Cleaning: Ensure that your Resonance Unplugged is not plugged into any device before cleaning or maintaining it. • Cleaning: Wipe down the surface of your Resonance Unplugged using a soft, slightly damp cloth. • Do not use any harsh or abrasive cleaning chemicals or materials on your Resonance Unplugged as doing so may damage or scratch the surface finish. • Do not expose your Resonance Unplugged to direct sunlight or high temperatures for extended periods of time.
ENVIRONMENTALLY FRIENDLY DISPOSAL Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available.
WARRANTY The Resonance Unplugged Series True Wireless Stereo Earphones come with astandard 12-month limited warranty against manufacturing defects and faults. Should your Resonance Unplugged Earphones be unboxed with any faulty parts, poor finishing or visible damage, or fail to perform due to a manufacturing defect or poor workmanship, please return it with your proof of purchase (till slip or invoice) to the store of purchase for an exchange, or repair, depending on the store’s returns policy.
