Resonance Series DUAL DRIVER MAGNETIC BLUETOOTH ® EARPHONES INSTRUCTION MANUAL Please read and retain these instructions for future reference.
PACKAGE CONTENTS • VolkanoX Resonance Series Dual Driver Bluetooth® Earphones • Charging Cable (Micro-USB) • 3 x Sets of Silicone Earbuds • Hard Carry Case • User Manual SPECIFICATIONS Bluetooth®: Version: 4.2 Chip Set: JR Profiles: HSP, HFP, A2DP, AVRCP Range: 10 m IP Rating: IPX5 Driver Size: 2 x 6 mm Impedance: 16 Ω Frequency Range: 20 Hz – 20 kHz Signal to Noise Ratio: 95 dB Sensitivity: 93 dB Battery: 55 mAh Playtime: 2 – 4 Hours Charging Time: 1 Hour Charge Input: 5 V DC, 0.
IDENTIFYING PARTS 1 2 3 6 4 1. Next Track / Volume Up 2. Multi-Function Button 3. LED Indicators 4. Microphone 5. Previous Track / Volume Down 6. Charging Port 5 INSTRUCTIONS FOR USE: CHARGING Connect the USB A end of the Charging Cable to a USB Charging Port and insert the Micro USB end to the port on the Resonance earphones. Make sure it is properly connected. The LED light will be lit while the earphones are charging and will turn off when the earphones are ready for use.
TURNING ON AND OFF To turn the earphones on, hold the Multi-Function button for approximately three seconds. The earphones will prompt Power on and the LED will start flashing blue. To turn the earphones off, hold the Multi-Function button for approximately three seconds. PAIRING WITH BLUETOOTH® DEVICES Please note that your earphones must be paired to a Bluetooth® device before they can be used. It is only necessary to pair your earphones once with each device. 1.
LOCATING THE BLUETOOTH® MENU iPhone, iPad, and iPod Touch: a) On your device, go to Settings. b) Select Bluetooth®. If Bluetooth® is not on, turn it on. c) The iPhone / iPad / iPod will automatically search for new devices. Android™ Phones and Tablets: a) On your device, go to the Settings menu. b) Select Bluetooth® (on older Android devices Bluetooth® is found in the Wireless and Networks menu). If Bluetooth® is not on, turn it on.
CONTROLS 1. Adjusting The Volume Function Operation Notes Increase Volume Short press the Next Track / Volume Up button Decrease Volume Short press the Previous Track / Volume Down When the volume reaches the minimum or maximum level, the VolkanoX Resonance Series Dual Driver Bluetooth® Earphones will produce a short tone. Note: Volume can be adjusted only while media is playing or during a phone call. 2.
3. Call Controls Status Incoming Call Call in Progress Function Operation Answer Call Short press the Multi-Function button Reject Call Press and hold the Previous Track / Volume Down button End Call Short press the Multi-Function button Note: If you answer or make a call while listening to media, the media will be paused until the call has ended. TROUBLE SHOOTING 1. My mobile phone cannot find any new Bluetooth® devices? a. Ensure the device has entered the pairing mode. b.
4. When paired with my computer, Windows® asks for a new driver. Can you supply this? We recommend you find compatible drivers for your computer online. 5. Why can I not remotely control the Pause / Play / Previous / Next functions when music is playing? This feature needs the Bluetooth® device paired with the earphones to support AVRCP (Audio / Video Remote Control Profile). Please ensure your device supports this.
• These earphones are not intended for use by children, or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety. Extreme caution must be exercised. • Children should be supervised to ensure that they do not play with the earphones. Packaging must never be left within reach of children, since it is potentially dangerous.
WARRANTY This VolkanoX Resonance Bluetooth® Earphones comes with a standard 12 limited month warranty against manufacturing defects and faults. Should your VolkanoX Resonance Bluetooth® Earphones be unboxed with any faulty parts, poor finishing or visible damage, or fail to perform due to a manufacturing defect or poor workmanship, please return it with your proof of purchase (till slip or invoice) to the store of purchase for an exchange, or repair, depending on the store’s returns policy.
