User Manual

Identifying Parts
Charging
INSTRUCTION MANUAL
Please read and retain these instructions for future reference.
VK-3412-B
• Bluetooth
Version: 4.2
Chipset: ACTION
Profiles: A2DP / AVRCP / HFP
Distance: Up to 33 ft / 10 m
• Sensitivity: 86 dB
• Signal to Noise Ratio: 65 dB
• Driver: 2 × 3”
• Impedance: 4 Ω
• Frequency Response: 80 Hz – 12 kHz
• Total Power Output: 2 × 22 W = 44 W RMS / 62 W Peak
• Charge Input: DC 5 V, 1 A
• Battery Capacity: 7.4 V Li-Ion, 3 600 mAh, Rechargeable Battery
• Charge Time: 6 Hours
• Playback Time: 4 – 6 Hours
• Product Size: 366 × 143 × 188 mm
• Max Size for USB Input: 32 GB
• Please fully charge the VolkanoX Anaconda Series Bluetooth Speaker before using it
for the first time.
• Connect the USB A end of the charging cable to a USB charging port and insert the
micro USB end to the port on the speaker. Make sure it is properly connected.
• The blue LED indicator lights will light up in sequence, depending on the current
charge status, while the speaker is charging. When the battery is full, the LED
indicator light will be lit.
• Please do not charge the speaker for more than 8 hours.
• VolkanoX Anaconda Series Bluetooth Speaker
• Micro USB Charging Cable
• Aux Cable
• Instruction Manual
• Bluetooth
• True Wireless Pairing
• FM Radio
• Aux Input
• USB Input
• IPX5 Water Resistant
• Up to 6 Hours Playtime
• 62 Watt Peak power
Package Contents
Highlights
Specifications
1 2 3 4
Pairing With Bluetooth Devices
Your speaker must be paired to a Bluetooth device before it can be used. It is only
necessary to pair your speaker once with each device.
1. Switch the power on. The LED light will flash blue and a welcome tone will be
audible.
2. Cycle to Bluetooth mode by pressing the Mode Button, the speaker will beep
twice, this means that the speaker is ready to pair with your Bluetooth playback
device.
Pairing a second Viper Speaker / Daisy Chaining:
3. Your VolkanoX Anaconda Speakers need to pair to each other before connecting to
your Bluetooth device.
4. Once both of the speakers are in Bluetooth Mode press the True Wireless Pairing
(TWS pairing) Button on one of your speakers, this will pair your two speakers
together, a connection tone will be audible once both speakers are paired and the
TWS Button will light up. It is only necessary to pair your speakers with each other
once.
5. Activate the Bluetooth on your playback device and search for “Anaconda”. Select
“Anaconda” from the device’s list to connect. You will hear a connection tone after
the speaker has been paired successfully.
6. You can now playback audio through the speaker.
7. Music tracks can be selected either on the speaker or on your playback device
(smartphone, computer, tablet, etc.). Press the Next Track / Volume Up Button
to skip to the next song. Press the Previous Track / Volume Down Button to
play the previous song.
8. Volume can be controlled either on the speaker or on your playback device
(smartphone, computer, tablet, etc.). Press and hold the Next Track / Volume
Up Button or the Previous Track / Volume Down Button to increase or decrease
volume accordingly.
9. Press the Play / Pause and FM Auto Scan on the speaker to play or stop the
music.
1. Power Button
2. TWS pairing Button
3. Mode Button
4. Play / Pause and FM Auto Scan
5. Next Track / Volume Up Button
6. Previous Track / Volume Down Button
7. LED Indicator
8. USB Input, Aux Input and Micro USB Charging Input
10. When you want to exit the TWS Mode, press the TWS Button, on the unit you
set at beginning, again to exit the TWS function.
Controls
Function Operation
Increase Volume Long press the Next Track / Volume Up Button
Decrease Volume Long press the Previous Track / Volume Down Button
Next Track Short press the Next Track / Volume Up Button
Previous Track Short press the Previous Track / Volume Down Button
Play or Pause Track Short press the Play / Pause and FM Auto Scan Button
Navigate between
the USB, Bluetooth,
and Aux modes
Short press the Mode Button.
Function Operation
Increase Volume Long press the Next Track / Volume Up Button
Decrease Volume Long press the Previous Track / Volume Down Button
Next Track Short press the Next Track / Volume Up Button
Previous Track Short press the Previous Track / Volume Down Button
Play or Pause Track Short press the Play / Pause and FM Auto Scan
2. Bluetooth, USB,and Mode
1. Controls
NOTE: The Next Track, Previous Track and Play / Pause Buttons will
not work in Aux Input Mode, however, you can still increase or decrease the speaker
volume.