.vo w ww om i.
Page 1. 9. 17. 25. 33 ENGLISH ENGLISH FRANÇAIS DEUTSCH ESPAÑOL REGULATORY STANDARDS SUMMARY Content Page 2. 1. REQUIREMENTS 2. PRODUCT OVERVIEW 3. 3. 3. DESCRIPTION OF THE ACTIVEYES SYSTEM 4. 4. QUICK START 5. CHARGING THE BATTERY 4. 6. ADVANCED USES 4-5. 7. TROUBLESHOOTING 5. 6. 8. COMPATIBILITY 9. SPECIFICATIONS 6. 10. SIGNIFICANCE OF LIGHT SIGNALS 7. 7. 11. RECOMMENDATIONS 7. 12. PRECAUTION FOR USE - 3D VIEWING GUIDELINES 13. WARRANTY 8. 8. 14. MAINTENANCE OF YOUR GLASSES 8. 15. CONTACT 1.
1. REQUIREMENTS To use your ActivEyes Pro in active 3D mode you need a 3D device playing 3D content on a 3D Display using compatible IR synchronization. 3D Content Movie, sports... Active 3D display 3D Player Computer, Blu-Ray... IR Beam If your 3D Display does not come with an IR emitter, you may want to acquire one from its manufacturer, or plug a Volfoni ActivHub Pro to a VESA DIN3 connector. 3D Content Movie, sports... Active 3D display ActivHub Pro 3D Player Computer, Blu-Ray...
2. PRODUCT OVERVIEW Your 3D Glasses System by Volfoni includes one pair of ActivEyes Pro 3D glasses and one ActivMe Pro electronic receiver. Your ActivEyes Pro glasses, when connected to the ActivMe Pro, are compatible with most 3D TV sets using IR signals to control 3D glasses. The ActivMe Pro receiver can be recharged and updated to new IR and RF 3D protocols via its USB port. If your ActivEyes Pro 3D Glasses are fitted with Hybrid ClearLenses, they will decode 3D from passive displays too. 3.
4. QUICK START To watch active displays using your ActivEyes System in universal infra-red 3D mode : 1. Using the connection cable, plug the ActivEyes Pro to the ActivMe Pro, and place the glasses on your head. 2. Check that the “function” selector on the ActivMe Pro is on “1”. 3. Switch the power on. The glasses should blink once each eye to signal that the system is up and running. 4. Hold the ActivMe Pro driver facing your 3D display or IR source and press the “Action” button for two seconds.
Monitoring Active and Passive 3D at once (VPAE-01000 only) You can watch passive 3D even with the ActivMe Pro plugged and active. This allows you to monitor 3D on active and passive displays at once without switching between two pairs of 3D glasses. Note that the light efficiency in this mode is lower than exclusively passive 3D. Product Registration and Software Update When registering your product online (www.volfoni.
8. COMPATIBILITY Active 3D TV brands compatible with ActivEyes Pro in IR mode : Sony®, Panasonic®, LG®, Samsung®, Konka®, Hinsen®, Arcelik®. Active 3D IR Emitter or protocols compatible with ActivEyes Pro : Nvidia®, NuVision®, Volfoni®. Passive 3D TV sets compatible with VPAE-01000 : LG®, Hyundai®, JVC®, Sony®. The list is indicative. Due to possible changes of IR protocol by manufacturers, Volfoni cannot warranty compatibility with third party products.
10. SIGNIFICANCE OF LIGHT SIGNALS Green: Searching for 3D signal Flashing Green: Valid 3D signal detected Red: Battery recharge Orange: Searching for 3D signal and recharging simultaneously Flashing Red/Orange: Viewing 3D and recharging simultaneously 11. IMPORTANT SAFETY RECOMMENDATIONS - The ActivEyes Pro 3D glasses are not suitable for wear when playing sports, driving vehicles, operating heavy machinery, or doing outdoor activities.
13. WARRANTY Your ActivEyes Pro and ActivMe Pro are warrantied to the original purchaser for three to twelve months according to local legislation. Glasses and receiver should be returned in original box along with original proof of purchase. Lenses that are broken or scratched are not covered. Volfoni does not warrant uninterrupted or error-free operation of the product. 14. CAUTION : MAINTENANCE OF YOUR GLASSES - Protect the 3D system from direct sunlight, heat, or water.