VOKKERO GUARDIAN US Wireless Interface (WI) for GUARDIAN US User Guide Version 1.0.0 210858A VOKKERO VOKKERO VOGO NA (North America) 25 Main Street, 3rd Floor Tuckahoe, NY 10707 www.vokkerousa.com VOGO 101, place Pierre Duhem, Immeuble Les Centuries II, 34000 Montpellier, France www.vokkero.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 PRÉAMBULE / PREAMBLE • Ce guide décrit les fonctionnalités du produit Vokkero® Guardian WI, ses options et ses accessoires. Il explique comment le configurer pour permettre une extension du système de conférence vers un réseau filaire. • This guide describes the functionality of the Vokkero® Guardian WI product, options and accessories. It explains how to configure it to allow an extension of the conference system to a wired network.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 PRÉAMBULE / PREAMBLE 2 INFORMATIONS 4 DISCLAIMER 4 TECHNICAL SUPPORT 4 COMPLIANCE TO FCC US/CAN 5 INTRODUCTION 7 ENVIRONMENTAL RECOMMENDATIONS 8 WARNINGS 8 RECOMMANDATIONS REGARDING USE 9 DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS 9 INTRODUCTION 10 1. SYSTEM DESCRIPTION 11 1.1. VOKKERO® Guardian WI interface 11 1.1.1. Device interface description 11 1.1.2. General features 11 2. STARTING THE INTERFACE 12 2.1.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 INFORMATIONS Document Information Title VOKKERO GUARDIAN US Subtitle Wireless Interface (WI) Document type User Guide Version Version 1.0.0 This document applies to the following products: GB Nom Référence VOKKERO GUARDIAN US - Wireless Interface (WI) Up to: VO8161B DISCLAIMER This document and the use of any information contained therein, is subject to the acceptance of the VOKKERO terms and conditions.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 COMPLIANCE TO FCC US/CAN • This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause Harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 USAGE RESTRICTIONS : THE USE OF VOKKERO GUARDIAN WIRELESS INTERFACE (WI) IN US/CAN IMPORTANT: Before using the device, please observe the legal provisions in force in your country. Table ID Frequencies for VOKKER-GUARD-FCC004-WI H1 (US1) 25 channels within the 916.698MHz to 927.573MHz band A1 (US2) 27 channels within the 902.188MHz to 916.063MHz band H2 (US3) 25 channels within the 903.688MHz to 927.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 ENVIRONMENTAL RECOMMENDATIONS All superfluous packaging materials have been eliminated. We have done everything possible to make it easy to separate the packaging into three types of materials: cardboard (box), expanded polystyrene (filler material) and polyethylene (packets, foam protective sheets). Your device is composed of materials that can be recycled and reused if it is dismantled by a specialist company.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 RECOMMANDATIONS REGARDING USE • • • • • • • Before using the system, check that the power supply voltage shown in the user manual corresponds to your supply. If it doesn’t, please consult your supplier. Place the device against a flat, firm and stable surface.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 INTRODUCTION The instructions given below will make it simple and easy for you to start using your VOKKERO® Guardian Wireless Interface (WI) communication system. All of the operations described are shared by the versions of the VOKKERO® Guardian WI product listed below: VO8161B Note: the reference number for your device can be found on the label located on the base of the device.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 1. SYSTEM DESCRIPTION 1.1. VOKKERO® Guardian WI interface 1.1.1.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 2. STARTING THE INTERFACE Before connecting the power supply, please ensure that the switch on the device is set to OFF • To switch the device on, set the “On/Off” switch to ON. • To switch the device off, set the “On/Off” switch to OFF. 2.1. Description of screen icons (default) GB Once you have switched on the device, the LCD screen will light up and the VOKKERO® logo will be displayed.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 2.5. SETTINGS BUTTON The settings button is a continuous rotation button with a validation function. A long press on the button will let you switch to audio configuration mode for input/output. Rotating the button will allow you to navigate between the different available options. Pressing the button will allow you to validate.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 3. RADIO CONFIGURATION 3.1. Connection The interface can be connected to the configurator using the USB socket on the top of the device. It must be linked to the USB socket of the VOKKERO® Guardian configurator/charger. The USB cable comes supplied with your ap-pliance. The WI icon will be displayed on the configurator’s home screen. GB USB socket (Type A Female) USB socket (Type B Female) USB cable 3.2.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 4. AUDIO CONFIGURATION 4.1. Configuration with 4-wire Intercom systems The WI interface is designed to be connected to a 4-wire intercom. Below you will find 2 configuration examples: 4.1.1. Clearcom 4-wire interface • Connect a cable between the green connector of the clearcom interface and two XLR 3 pts male and female. In order to identify the cabling, refer to the Clearcom IF4W4 user guide.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 4.1.2. GreenGo 4-wire interface • Connect an XLR 3 pts cable (male/female) between the “OUT1” connector of the 4-wire interface system and the “IN” connector of the Vokkero Guardian wireless interface. • Connect an XLR 3 pts cable (male/female) between the “IN1” connector of the 4-wire interface system and the “OUT” connector of the Vokkero Guardian wireless interface.
VOKKERO GUARDIAN US Wireless Interface (WI) - User Guide V1.0.0 4.2.1. Using with the ClearCOM MS-702 2-wire intercom Adopted settings for the WI interface: • Out Audio Gain: -6dB • In Audio Gain: 34dB • Echo cancellation: Yes Adopted settings for the ALTAIR 2-wire/4-wire convertor: • 2 potentiometers set at mid-level • Input (Rx) switch: -40dB • Output (Tx switch): 0dB GB 4.2.2.
