voidacoustics.com Bias Q3 USER GUIDE V1.
Important Safety Instructions Common symbols and meanings CAUTION THE TRIANGLE WITH THE LIGHTNING BOLT IS USED TO ALERT THE USER TO THE RISK OF ELECTRIC SHOCK. THE TRIANGLE WITH THE EXCLAMATION POINT IS USED TO ALERT THE USER TO IMPORTANT OPERATING OR MAINTENANCE INSTRUCTIONS. THE CE-MARK INDICATES THE COMPLIANCE OF THE PRODUCT TO ALL THE APPLICABLE EUROPEAN DIRECTIVES SYMBOL FOR EARTH/GROUND CONNECTION. SYMBOL INDICATING THAT THE EQUIPMENT IS FOR INDOOR USE ONLY.
Regulatory Compliance Statements Europe If the time arises to dispose of your product, please recycle all possible component. This symbol indicates that when the end-user wishes to discard this product, it must be sent to separate collection facilities for recovery and recycling. By separating this product from other household-type waste, the volume of waste sent to incinerators or land-fills will be reduced and natural resources will thus be conserved.
Preliminary operations Output connections The box contains the following: 1x TTM Series amplifier 1x Power cord 3x1.5mm2 16A Type F 1x Power cord 3x1.5mm2 16A Type I 1x Power cord 16/3 SJT 1x User Guide Digital Audio Connection Package list Location • Install your TTM Series Amplifier in well ventilated rack cabinets at a maximum height of 2 meters above the floor. • Secure both front and rear brackets to the rack. • Connect the AC Mains connector to a circuit breaker.
1 Bias Q3 1 2 3 4 2 3 4 HOME - Air Motion >60 dB - Air Motion >60 dB - Stasys Xair >60 dB - Stasys Xair >60 dB BACK 5 Home The Home page displays the amplifier’s output channels, their level, and the speaker presets assigned to them. From this page, it is also possible to mute/unmute the outputs by clicking the respective loudspeaker icons . Level & Delay The Level and Delay pages allow the control of the amplifier output levels and delay times.
FW Update Amplifier and Dante firmware updates can be performed via ArmoníaPlus. During the firmware update, the display will show the message ‘Updating Firmware’, and a status bar will show the progress through the various phases. Networking The TTM Series amplifier supports Dante networking. The twogigabit ports are internally connected via a Gigabit switch to simplify wiring and eliminate the need for external network switches in small systems.
Pinouts HOT 2 1 GND GND 1 2 3 3 HOT COLD COLD Analog/AES3 input XLR-M pinout Analog/AES3 link XLR-F pinout Pin# Terminal Pin# Terminal 1 Ground (GND) 1 Ground (GND) 2 Positive (+) 2 Positive (+) 3 Negative (-) 3 Negative (-) Output NL4 Speakon-F pinout Network Connector RJ45 pinout Single Ended 1 2 3 4 5 6 7 8 Color code (TIA/EIA-568-B) Pin ORANGE / WHITE 1 ORANGE 2 GREEN / WHITE 3 BLUE 4 BLUE / WHITE 5 GREEN 6 BROWN / WHITE 7 BROWN 8 A 1+ Speaker A positive termin
Front Panel 1 3 2 4 USB Port Control Panel Reserved for servicing purposes 1 Main Menu 2 Rotary encoder pushbutton 3 Power status LED 4 "Back/ArmoníaPlus Callback" pushbutton Rear Panel Output section 10 9 14 13 22 21 20 19 8 7 12 11 18 17 16 15 24 23 Input section 7 CH1 (1+/-) | CH2 (2+/-) 15 Input 1 (XLR-F) 8 CH2 (1+/-) | N.C. (2+/-) 16 Input 2 (XLR-F) 9 CH3 (1+/-) | CH4 (2+/-) 17 Input 3 (XLR-F) 10 CH4 (1+/-) | N.C.
Page intentionally left blank
Page intentionally left blank
Page intentionally left blank
NORTH AMERICA Void Acoustics North America Call: +1 503 854 7134 Email: sales.usa@voidacoustics.com HEAD OFFICE Void Acoustics Research Ltd, Unit 15, Dawkins Road Industrial Estate, Poole, Dorset, BH15 4JY United Kingdom Call: +44(0) 1202 666006 Email: info@voidacoustics.com voidacoustics.
