User's Guide

User Guide

Wireless Charging

PowerBank PB-D100W2

Thanks for purchasing Vogtech product, please read this user guide carefully before operation

and keep it for future reference.

1. Box Contents:

1 Powerbank

1 USB to Micro USB Cable

1 User Guide

2. Technical Speciﬁcations:

Battery Type:

Capacity:

Material:

Size:

Weight:

Lithium Polymer

37.0 Wh(3.7V/10.000 mAh)

Plastic

145.0x70.5.0x17.5 mm

236.0 g

Output:

Input:

3. About the Powerbank:

USB 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5A

Type C 5V/3A, 9V/2A, 12V/1.5A

Type C 5V/3A, 9V/2A

Micro USB 5V/2A, 9V/2A

(1) USB Output (QC 18W+Huawei 22.5W)

(2) Type Input&Output (PD 18W)

(3) Micro USB Input (QC 18W)

(4) Wireless Charging LED

(5) Power On/Off

(6) Wireless Charging 5W

(7) Lighting Logo

(8) Capacity LEDs

(9) Quick Charging LED

User Guide

Vogtech Powerbank

Wireless 10.000 mAh

1 2 3

PAGE 1
Wireless Charging PowerBank PB-D100W2 Thanks for purchasing Vogtech product, please read this user guide carefully before operation and keep it for future reference. 1. Box Contents: Vogtech Powerbank Wireless 10.000 mAh 1 Powerbank 1 USB to Micro USB Cable 1 User Guide User Guide 2. Technical Specifications: Battery Type: Capacity: Material: Size: Weight: Lithium Polymer 37.0 Wh(3.7V/10.000 mAh) Plastic 145.0x70.5.0x17.5 mm 236.0 g Output: USB 4.5V/5A, 5V/3A, 9V/2A, 12V/1.
PAGE 2
4. Check Your Powerbank Battery Status from the LED: EN 5-3. Charge Qi-Enabled Gadgets(TWS, Mouse etc) with Small Wireless Power EN Step 1. Press the power button once, and then press it and hold it for 3 seconds again to activate the small power charging mode. Step 2. Place down your Qi-Enabled gadgets on the powerbank surface where you can see a wirless charging icon. Press the Power On/Off Button to check the remaining capacity. The battery is low, less than 25% remaining. PLEASE recharge.
PAGE 3
ID:2AXMQ-PB-D100W2 This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undersired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.