VOKKERO ELITE FCC User Guide Version 1.1 211426 VOKKERO VOGO NA (North America) 25 Main Street, 3rd Floor Tuckahoe, NY 10707 www.vokkerousa.com VOGO 101, place Pierre Duhem, Immeuble Les Centuries II, 34000 Montpellier, France www.vokkero.
VOKKERO ELITE FCC | User Guide V1.1 • This guide describes the functionality of the system Vokkero® ELITE, options and accessories. It explains how to configure it to allow a conference-type communication between multiple users. • No part of this document may be reproduced or transmitted (in electronic or paper, or photocopying) without the agreement of Vokkero. This document may be changed without notice. All trademarks mentioned in this guide are the subject of intellectual property rights Vokkero.
VOKKERO ELITE FCC | User Guide V1.1 Table des matières ENGLISH 4 INFORMATIONS 5 DISCLAIMER 5 TECHNICAL SUPPORT 5 INTRODUCTION 9 ENVIRONMENTAL RECOMMENDATIONS 9 WARNINGS 9 DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS WITHIN THE EUROPEAN UNION 10 THIS SYMBOL ON THE DEVODE OR ITS PACKAGING MEANS THE USE OF A DC VOLTAGE. 10 RECOMMANDATIONS REGARDING USE FOR VO8363AAAA & VO7674AAAA 10 1. SYSTEM INSTALLATION PROCEDURE 11 2. SYSTEM DESCRIPTION 12 2.1. VOKKERO ELITE Terminal 12 2.1.1.
VOKKERO ELITE FCC | User Guide V1.
VOKKERO ELITE FCC | User Guide V1.1 INFORMATIONS Document Information Title VOKKERO ELITE FCC Subtitle ELITE Document type User Guide Version Version 1.1 This document applies to the following products: Name Reference VOKKERO ELITE FCC - ELITE From : VO8364AA VOKKERO ELITE - Configurator From : VO7674AA VOKKERO ELITE - Charger From : VO8363AA EN DISCLAIMER This document and the use of any information contained therein, is subject to the acceptance of the VOKKERO terms and conditions.
COMPLIANCE TO FCC US/CAN This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1). this device may not cause Harmful interference, and (2). this device must accept any interference received, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement: This device complies with the FCC and ISED portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
VOKKERO ELITE FCC | User Guide V1.1 USAGE RESTRICTIONS : THE USE OF VOKKERO ELITE IN US/CAN IMPORTANT: Before using the device, please observe the legal provisions in force in your country. OPERATING FREQUENCIES of VOKKERO ELITE FCC EN FHSS Mode: 2 Hopping tables are available DTS mode: Each device proposes 15 channels using digital modulation techniques (DTS mode). Available channels are listed below.
VOKKERO ELITE FCC | User Guide V1.1 INTRODUCTION All rights to this manual are the exclusive property of VOKKERO. All rights reserved. Copying this manual (without written permission from the owner) via printing, copying, recording or by any other means, translating this manual (in full or partially) into any other language, including all programming languages, using any electrical, mechanical, magnetic or optical devices, manually or any by other methods, is prohibited.
VOKKERO ELITE FCC | User Guide V1.1 DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste by taking it to a collection point designated for the recycling of electrical and electronic appliances.
VOKKERO ELITE FCC | User Guide V1.1 The operations described below allow you to rapidly and easily implement your VOKKERO ELITE communication system. All the operations described are valid for all the VOKKERO ELITE terminals listed below: VOKKER-ELITE-FCC001-ELITE FCC : VO8364AA Note: Your product reference is given on the label on the back of the terminal housing.
VOKKERO ELITE FCC | User Guide V1.1 2. SYSTEM DESCRIPTION 2.1. VOKKERO ELITE FCC Terminal 2.1.1. Description of product interface EN Function button Set specific functionalities (recording start & stop…) On/Off button Turns the terminal On/Off Gives battery life (led colour from green to orange and then to red) Headset connector Connect to a VOKKERO headset. LED Screen Gives indication on terminal role, network reception, recorder status… + and – buttons Adjust the audio volume 2.1.2.
VOKKERO ELITE FCC | User Guide V1.1 2.2. VOKKERO ELITE FCC Charger/Configurator 2.2.1. Description of product interface EN 2.2.2.
VOKKERO ELITE FCC | User Guide V1.1 3. QUICK START OF THE CONFERENCE 3.1. Setting up Audio Conference The terminals are delivered pre-configured and ready-to-use. The first step consists in turning on the terminals and in particular the Master role terminal. This role is used to synchronize the other terminals. You can recognize the Master terminal thanks to its purple network icon.
VOKKERO ELITE FCC | User Guide V1.1 or USER). That only means that an extra robust radio is active (can be active only on one terminal in the conference/network). This gives even more robustness in case of radio interferences to that terminal. We recommend to give to give that terminal to the main referee (or the one speaking to VAR or to public announcement). ------------- Recording Icon EN If icon does not appear: No recording. If icon is fixed: A recording of the VOKKERO conference is going-on.
VOKKERO ELITE FCC | User Guide V1.1 3.5. Launch a recording Insert a SD card into the dedicated slot (FAT32 formated) Push during 2 seconds the Function button The recording icon should appear and stay fixed. In case it blinks and then disappears it means that your SD card is not present, well-inserted or wellrecognized. To stop recording, push the Function button again. The recording icon should disappear.
VOKKERO ELITE FCC | User Guide V1.1 - naming of the terminals - possibility to give the MASTER ROLE to the CENTRAL REF or to the 4th Assistant REF - pairing of two WIRELESS INTERFACE (WI) for main and backup pitch-to-VOR audio lines - creation of spare identical terminals for all different roles (allowing a technician to swap terminals during half-time if needed) - creation of Listener terminals 1. 2. 3. 4. 5. 6. 7. 8.
VOKKERO ELITE FCC | User Guide V1.1 EN If you have chosen for instance the Slot 4 (the 4th REFEREE) for MASTER ROLE: 1. CENTRAL REF (green antenna icon / whistle icon) 2. A.REF (green antenna icon) 3. A.REF (green antenna icon) 4. 4th REF / MASTER (purple antenna icon) 5. SPARE CENTRAL REF (Central REF spare with whistle icon, to be kept switched-off!) 6. SPARE REF (green antenna icon) 7. SPARE 4th REF / MASTER (MASTER spare terminal with purple antenna icon, to be kept switched-off!) 8.
VOKKERO ELITE FCC | User Guide V1.1 EN IN ANY CASE AND NO MATTER THE “Quick Config.” CHOSEN: Always make sure: - To have only one MASTER ROLE terminal in the conference (only one terminal with purple antenna icon displayed) - To have only one Central REF in the conference (only one terminal with whistle icon displayed) 5.3. CENTRAL REF TO OTHERS AUDIO MODE During the “Quick config.” you are invited to chose which terminal you want to apply the CENTRAL REF enhanced radio capabilities.
VOKKERO ELITE FCC | User Guide V1.1 6. SETTINGS MENU This menu enables a more detailed configuration of the system in order to configure the terminals, the system or the configurator. • In “Devices”, you can access the settings of the terminals which are currently positioned on your charger. • In “System”, you can change the settings of the whole VOKKERO network • In “Configurator”, you can set the configurator parameters. The details for each element are given below. EN 6.1.
VOKKERO ELITE FCC | User Guide V1.1 6.1.3.
VOKKERO ELITE FCC | User Guide V1.1 EN 6.1.6. Sidetone The Sidetone mode enables you to turn on and adjust the audio return level (enabling you to listen to your own voice) in your headset. The default mode is OFF. 6.1.7. Advanced audio This mode allows our customers to fine-tune themselves (Manual mode) some audio parameters including microphone and speaker gain, differential mode, gating or electrical polarization.
VOKKERO ELITE FCC | User Guide V1.1 6.1.9. EN SD Card space This menu gives the remaining time that can be stored with the Recorder on the inserted SD Card. 6.1.10. Factory settings This menu brings back, to the factory settings, a terminal or all terminals connected to the configurator. After selecting and validating your choice, the configurator lets you know if the return to factory settings has completed successfully.
VOKKERO ELITE FCC | User Guide V1.1 6.2. SYSTEM 6.2.1. Channel mode Use this menu to select a predefined mode of channels. By default, the system is configured to operate on FHSS mode (i.e., «HOPPING» selected); this means that the terminals send their radio frames to other terminals on 25 (or 26) frequencies with Frequency hopping spread spectrum functioning. EN With «HOPPING» channel mode, the «Quick config.» provides access to two table channels (H1 or H2).
VOKKERO ELITE FCC | User Guide V1.1 Updating terminals To update terminals you have to use a USB key. The USB key used must be < or = 4Go. On the USB key: - Copy the update software to the root - The files mustn’t be in a folder - No others files or folder have to be on the USB key The version currently installed in the terminal appear on the display.
VOKKERO ELITE FCC | User Guide V1.1 6.3. CONFIGURATOR EN 6.3.1. Backlight Slide the cursor from left and right to decrease and increase, respectively, thescreen lighting. 6.3.2. Screen calibration The configurator touchscreen is already calibrated in the factory; you can however calibrate your own touchscreen if you note a significant change in screen detection. To do this, carry out the following 5 steps: Select each angle with the yellow pointer, then select the circle at the middle of the screen.
VOKKERO ELITE FCC | User Guide V1.1 Updating the configurator To update the configurator you have to use a USB key. The USB key used must be < or = 4Go. On the USB key: - Copy the update software to the root - The files mustn’t be in a folder - No others files or folder have to be on the USB key The version currently installed in the configurator appear on the display.
