THE SINGER'S ULTIMATE CHOICE Features: • 4 mic outputs • 4 wireless handheld mics included • Individual Volume controls for precise vocal balancing • Interference-resistant UHF Band operation from 614 MHz - 694 MHz • Battery life: 12 hours o w n e r ' s m a n • Dimensions 19” (W) x 8” (D) x 1.
Table of contents Safety instructions ............................................................................................................. 2 FCC information ................................................................................................................. 3 Welcome ........................................................................................................................... 4 Listening for a lifetime .......................................................................
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No userserviceable parts inside. Only refer servicing to qualified service personnel. 9.
FCC INFORMATION (U.S.A.) CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 1. To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2.
Welcome... And Thank you for purchasing the UHF-5800 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Specifications Receiver Oscillation Mode: Quartz Controlled Fixed Frequency Stability: 10 PPM Sensitivity: 1.6uV @ sinad =12dB Max. Deviation Range: 50Hz S/N Ratio:>105dB T.H.D.: <0.5% @ 1kHz Image rejection: 85dB typical Spurious Rejection: 75dB typical Frequency Response: 40Hz~16kHz Squelch Control: dual-squelch circuit Max. Output Level: Balance: 0~400mV, Unbalance: 0~200mV Power Supply: External DC Power Supply, 0.7A, 12~15V DC Dimensions: 18.9”(L) x 1.8”(H) x 7.
Microphone basics Microphone Position The UHF-5800 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. The most common applications and placement techniques are listed below. Keep in mind that microphone technique is largely a matter of personal taste, and there is no one “correct” microphone position. Proximity Effect When the sound source is less than ¼ in.
Before getting started Before starting any installation procedures, it is recommend to completely unpack all the package contents. The original packaging should be kept in the event that re-shipping is needed. Upon unpacking the UHF-5800, you should have received the following items: Custom Aluminum Travel Case (1) UHF-5800 Receiver (1) Handheld Microphones (4) 3 ft. male/male ¼” cable (1) AA 1.
Mounting To install the UHF-5800 to a 19” rack case, complete the steps below. 1. Attach mounting brackets to the UHF-5800 via the supplied mounting screws. 2. Align the UHF-5800 with the desired space in rack and slowly slide in, rear panel first. NOTE: Depending on your rack case design, it may be necessary to allow for sufficient space for the antennas. 3.
Getting Connected System Connection 1. Connect the AC POWER ADAPTER to the UHF-5800 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet. 2. Connect the UHF-5800’s receiver to a sound system, mixer or amplifier’s microphone input(s) with either one ¼” output jack for a mixed channel output, or up to four XLR output jacks for separate output for each mic. DSP ECHO UHF-5800 V.CANCEL OUT V.PARTNER VOCAL CANCEL/PARTNER POWER TAPE REC. TAPE REC.
Front and rear panel descriptions and functions 1 7 5 2 3 4 9 8 6 10 11 1. ANTENNAS - Provide both RF and AF signals. 2. POWER (LED) - Indicates whether the UHF-5800 is ON or OFF. When it is lit, the power is ON. 3. RF (LED) - Lights when RF signals are received from the microphone channels. 4. AF (LED) - Lights when AF signals are received from the microphone channels. 5. SQUELCH controls - Manual controls for controlling each microphone’s signal strength for best performance.
Maintenance procedures Handheld Microphone Battery Installation 1. To remove the lid, press down on the tab and slide the lid down towards the bottom of the mic. 2. Insert 2 fresh 1.5-volt AA alkaline batteries. Make sure the batteries are inserted in the right direction according to polarity (+/-). 3. Close the BATTERY COMPARTMENT lid. Removing the Field Replaceable Modules Each of the 4 microphone modules on the UFH-5800 were designed in a way that allows them to slide out without the need for any tools.
UHF-5800 & stage monitor/p.a. loudspeakers If you will be using the UHF-5800 with stage monitors and/or P.A. system, try the following: • Place the stage monitor directly behind the microphone. • Locate the P.A. loudspeakers so that they point away from the rear of the microphone. (With the speakers located in these positions, the possibility of feedback is greatly reduced). • Always check the stage setup before a performance to ensure optimum placement of microphone and monitors.
Troubleshooting Problems Solutions No sound output, RF/AF LED(s) are not glowing • Make sure the microphone and receiver power switches and receiver are set to the ON position. • Check microphone batteries to ensure that they are providing sufficient power. Replace battery if necessary. • Check receiver’s AC power connection. • Make sure antennas are firmly connected and extended to an optimal position. • If necessary, reduce the distance between the microphones and receiver.
UHF-5800 Owner’s Manual © VocoPro 2010 Version 1.0226 www.vocopro.
