m UHF-5805 a n u a l THE SINGER'S ULTIMATE CHOICE • 4 rechargeable wireless handheld mics included r • Individual Volume controls for precise vocal balancing w • 4 independent field-replaceable Modules o • 2 dual microphone chargers e • 4 mic outputs n Features: ' s 4-Channel Rechargeable Wireless Microphone System • Interference-resistant UHF Band operation from 614 MHZ - 649 MHz • Rugged 1 RU metal receiver chassis • Dimensions 19” (W) x 8.2” (D) x 1.
Table of contents Safety instructions ....................................................................................................................................... 2 FCC information ............................................................................................................................................ 3 Welcome ..........................................................................................................................................................
SAFETY INSTRUCTIONS �������������� - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. ������� ������������� CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions.
Welcome... And Thank you for purchasing the UHF-5805 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Specifications Receiver Carrier Frequency Range: UHF 614~694MHz Oscillation Mode: Quartz Controlled Fixed Frequency Stability: 10 PPM Sensitivity: 1.6uV @ sinad =12dB Max. Deviation Range: 50Hz S/N Ratio:>105dB T.H.D.: <0.5% @ 1kHz Image rejection: 85dB typical Spurious Rejection: 75dB typical Frequency Response: 40Hz~16kHz Squelch Control: dual-squelch circuit Max. Output Level: Balance: 0~400mV, Unbalance: 0~200mV Power Supply: External DC Power Supply, 0.7A, 12~15V DC Dimensions: 19”(L) x 8.2”(D) x 1.
Microphone basics Microphone Position The UHF-5805 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. The most common applications and placement techniques are listed below. Keep in mind that microphone technique is largely a matter of personal taste, and there is no one “correct” microphone position. Proximity Effect When the sound source is less than ¼ in.
Before getting started Before starting any installation procedures, it is recommend to completely unpack all the package contents. The original packaging should be kept in the event that re-shipping is needed. Upon unpacking the UHF-5805, you should have received the following items: • Custom Aluminum Travel Case (1) • UHF-5805 Receiver (1) • Handheld Microphones (4) • 3 ft.
Mounting To install the UHF-5805 to a 19” rack case, complete the steps below. 1. Attach mounting brackets to the UHF-5805 via the supplied mounting screws. 2. Align the UHF-5805 with the desired space in rack and slowly slide in, rear panel first. NOTE: Depending on your rack case design, it may be necessary to allow for sufficient space for the antennas. 3.
Getting Connected System Connection 1. Connect the AC POWER ADAPTER to the UHF-5805 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet. 2. Connect the UHF-5805’s receiver to a sound system, mixer or amplifier’s microphone input(s) with either one ¼” output jack for a mixed channel output, or up to four XLR output jacks for separate output for each mic. DSP ECHO �������� ��� V.CANCEL V.PARTNER VOCAL CANCEL/PARTNER POWER TAPE REC. TAPE REC.
Maintenance procedures Removing the Field Replaceable Modules Each of the 4 microphone modules on the UHF-5805 were designed in a way that allows them to slide out. This is a convenient feature if ever a module needs to be repaired or replaced. 1. Remove the two screws that fasten the module to the front panel. 2. To remove the module, simply slide the module out of the compartment NOTE: It might be helpful to use a flat-head screwdriver to nudge the module out of its compartment. 3.
Charging the Microphones The UHF-5805 comes with two dual chargers that let you charge all four microphones at the same time. Charging the Microphones If the LED light on the microphone(s) does not light up when the microphone is turned on, this indicates that the microphone needs to be charged To charge: 1. Place the microphone in the charger slot, the LED on the charger will be lit while the microphone is charging. 2. When the LED on the charger turns off, the microphone is charged and can be removed.
Front and rear panel descriptions and functions 1 7 5 2 3 4 9 8 6 10 11 1. ANTEN ANTENNAS NNAS - Provide both RF and AF signals. 2. POWER (LED) - Indicates whether the UHF-5805 is ON or OFF. When it is lit, the power is ON. 3. RF (LED) - Lights when RF signals are received from the microphone channels. 4. AF (LED) - Lights when AF signals are received from the microphone channels. 5. SQUELCH controls - Manual controls for controlling each microphone’s signal strength for best performance.
UHF-5805 & stage monitor/p.a. loudspeakers If you will be using the UHF-5805 with stage monitors and/or P.A. system, try the following: • Place the stage monitor directly behind the microphone. • Locate the P.A. loudspeakers so that they point away from the rear of the microphone. (With the speakers located in these positions, the possibility of feedback is greatly reduced). • Always check the stage setup before a performance to ensure optimum placement of microphone and monitors.
Troubleshooting Problems Solutions No sound output, RF/AF LED(s) are not glowing • Make sure the microphone and receiver power switches and receiver are set to the ON position. • Check microphone charge to ensure there is sufficient power. Charge mic if necessary • Check receiver’s AC power connection. • Make sure antennas are firmly connected and extended to an optimal position. • If necessary, reduce the distance between the microphones and receiver. • Turn up the receiver’s VOLUME level controls.