R TM r e n w Professional Infrared Dual Rechargeable Wireless Mic System o IR-9000 ' s m a n u a l THE SINGER'S ULTIMATE CHOICE
Table of Contents Listening for a Lifetime ...................3 Safety Instructions .........................4 FCC Information ............................5 Welcome .....................................6 Getting Started .............................7 Getting Connected .........................8 Operations ...................................11 Descriptions and Functions .............12 Troubleshooting ............................14 Technical Specs ............................
Listening for a lifetime Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Safety instructions CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. Explanation of Graphical Symbols 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. 9.
FCC information (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions.
Welcome And Thank you for purchasing the IR-9000 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Getting Started When unpacking your IR-9000 we recommend that you keep the original receipt or invoice, box and packing materials in case the product ever needs to be shipped for warranty repair or any other purpose. Warranty Information The IR-9000 is covered under a 1-Year Limited Warranty. For detailed warranty information please visit www.vocopro.com/warranty_standard.html Extended Limited Warranty Extended Warranties are also available and can be purchased directly from VocoPro. Visit www.vocopro.
Getting Connected Connecting the Power Supplies The IR-9000 includes two power supplies, one for the receiver unit (AC 110V) and one for the microphone charger (AC 110V). Surge Protector Recommended VocoPro recommends that you use a surge protector with all of your products to prevent damage caused by unpredictable power surges. Damage to your unit caused by a power surge may void the warranty. Connecting Power to the Receiver Unit (Fig.
Getting Connected cont. Connecting to a Mixer, amplifier or other audio input device The IR-9000 allows you to either connect each microphone channel individually to separate channels using the CH.1 and CH.2 outputs (Fig. C) or both microphone channels together through the MIXED output (Fig. D). Connecting Each Microphone Channel Individually (Fig. C) What you will need: • Two ¼” Microphone Cables • A mixer, amplifier or other audio input device with two available ¼” microphone inputs 1.
Getting Connected cont. Connecting the External Infrared Sensor(s) The IR-9000 can connect up to two external infrared sensors. One is included and a second one can be purchased from your nearest VocoPro dealer. 1. Connect The RCA end of the sensor to one of the External Sensor Inputs on the rear panel of the reciever unit 2.
Operations Turning on the IR-9000 Receiver Unit Make sure all cables and power supplies are connected correctly and firmly. 1. Press the power switch ON to turn the power on 2. Press the power switch OFF to turn the power off ON OFF Microphones 1. Slide the power switch to the ON position to turn the power on 2. Slide the power switch to the OFF position to the power off Adjusting the Volume Both microphone channels have individual volume controls for precise vocal balancing.
Descriptions and Functions ����������� � � � � � Receiver Front Panel 1. Power switch - Turns the receiver unit’s power on and off 2. Infrared Sensor - This is the built-in infrared sensor. Make sure there is a clear path between the microphones and this sensor. For increased signal strength you can add up to two external infrared sensors. See the getting connected section for instructions on connecting external infrared sensors. 3.
Descriptions and Functions cont. Microphone 1. Power Switch - Turns the microphone’s power on and off 2. Power indicator LED - Indicates when the microphone’s power is on. 4. IR Transmitter - This lens emits the infrared signal to the sensor on the receiver. Note: Keep hands away from this part of the microphone, as it may block the infrared signal. 4. Gain Control - Turn this control clockwise to increase the gain output of the microphone, turn counter-clockwise to decrease. 5.
Troubleshooting There is no power • Make sure the correct power adapter is connected to the reciever • If using a surge protector / power strip, make sure it is plugged in and switched on • Make sure all power connections are fully connected There is no sound or the sound is unclear • Make sure all cables are fully inserted into the correct inputs and outputs. See the Getting Connected section in this manual for detailed instructions on setting up the IR-9000.
Technical Specifications Transmitter Working Voltage: DC 2-3V Working Frequency: A: 2.08MHz, B: 2.54MHz Continuous working time: 5hr Receiver Power Consumption: 7W Audio Output: 600Ω/300mV S/N:>100dB Frequency response: 45Hz-15KHz ± 3dB Working Distance(forward): >10m Working Range: >30m² Power Adapter Input: AC 110V 60Hz Output: DC 15V 500mA Charger Charge voltage/current: DC 3.
R TM THE SINGER'S ULTIMATE CHOICE IR-9000 owner’s manual © VocoPro 2007 v1.0 www.vocopro.
