IR-9009 Infrared Wireless Microphone System o w n e r ’ s m a n u a l
Table of Contents Safety Instructions . . . . . . . . . . . FCC Information . . . . . . . . . . . . . Welcome . . . . . . . . . . . . . . . . . Listening for a Lifetime . . . . . . . . Before Getting Started/Features . Connecting Power . . . . . . . . . . . Connecting Audio Output . . . . . . . Connecting External Sensors . . . . Descriptions & Details . . . . . . . . Commonly Asked Questions . . . . . . . . . . . . . . .
Safety 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
FCC Information 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions.
Welcome And thank you for purchasing the IR-9009 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening for a Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Before Getting Started FEATURES • (2) Wireless Hand Held Microphones Included • Dual Channel IR Receiver • Two Discrete Channel Outputs (Ch.1/Ch.2) • One Mixed Output Available • Rugged, All Metal Mic Design • High/Low Microphone Transmission Power Settings • Interference Free Operation • Optional Rechargeable Kit with Charging Cradle Available (Sold Separately) Before starting any installation procedures, it is recommended to completely unpack all of the package contents.
Connecting Power RECEIVER 1. Ensure main power switch is set to the OFF position. 2. Connect the included power adapter to the power input on the rear of the receiver. 3. Plug the power adapter into a power outlet, or a surge protector that is plugged into an outlet. 2 3 Note: A surge protector is recommended to protect equipment from power spikes and outages. MICROPHONES 1. Unscrew metal battery cap. 2. Insert Two (2x) AA batteries; positive terminal facing downwards.
Connecting Audio Output There are 3 outputs available from which to get audio: the individual (Ch.1/Ch.2) channel outputs and the single mixed output. Depending on which jacks are used will determine the amount of volume control on the mixer/sound system. USING THE MIXED OUTPUT 1. Ensure main power switch is set to the OFF position. 2. Connect one end of the included 1/4” - 1/4” patch cable to the 1/4” output jack labeled MIXED on the back of the IR-9009 Receiver. 3.
Connecting External Sensors The IR-9009 requires line-of-sight to the microphones for continuous audio. The IR sensor is located on the front of the main receiver and should face the performing area. To enhance reception, the system includes an external sensor to place at a 90 degree angle relative to the performing area. USING THE EXTERNAL SENSOR 1. Ensure main power switch is set to the OFF position. 2. Connect the included external sensor into the 1/8” Sensor Input on the back of the IR-9009 receiver.
Descriptions and Details RECEIVER 1. Power - This switch turns the power OFF/ON to the system. 2. IR Sensor - This detects and receives the signals from the hand held microphones. Note: The microphones need to have line-of-sight to at least one receiver for continuous audio. 3. Ch.1 Volume - This alters the volume for Microphone 1. 4. CH.1 Signal LED - This LED registers the signal from Microphone 1. Note: The LED will shine when connected to its respective mic. 5. CH.
Descriptions and Details MICROPHONE 1. Power - This toggles the microphone power OFF/ON. 2. Power LED/Low Battery Indicator - This LED displays power status and battery level. • Green - The battery charge is good. • Red - The battery charge is low; change or recharge the batteries. 3. Battery Compartment - Insert two (2x) AA batteries. • Rechargeable batteries are compatible. 4. High/Low Switch - This switches the output transmission power from High and Low levels.
Commonly Asked Questions Q: What is “line-of-sight” and why do the microphones require it? A: Line-of-sight is a term meaning the microphone must have an unobstructed view to the receiver. The microphones communicate via infrared signals which does not penetrate and pass through materials like VHF or UHF frequencies do. Q: What do the external sensors do? A: They enhance the reception area that the microphones can be picked up.
Notes 15
IR-9009 Owner’s Manual © VocoPro 2015 v1.0609 www.vocopro.