Digital-34-Ultra o w n e r ' s m a n u a l
Table of Contents FCC Information....................................................... 3 Listening for a Lifetime.............................................. 4 Safety Instructions.................................................... 5 Welcome................................................................ 6 Getting Started........................................................ 7 Getting Connected.................................................... 8 Discriptions and Functions............................
FCC Information 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions.
Listening for a Lifetime Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. 9.
Welcome And thank you for purchasing the Digital-34-Ultra from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Getting Started WHAT’S IN THE BOX: - 4 Handheld Microphones - 4 Bodypack Transmitters - 4 Headset Microphones - 4 Instrument Cables - Digital-34 Quad Channel Receiver - Power Adapter - 2 ¼” Cables (2x) 7 (4x)
Getting Connected VocoPro has factory synced the wireless microphone(s) and receiver to provide an out-of-the-box plug and play convenience. The following re-sync procedure is only necessary if: 1. The wireless microphone connection is constantly dropping out or experiencing outside interference. 2. You intend to use multiple sets of the DIGITAL-31-32-34 simultaneously and therefore must custom select each individual frequency.
Getting Connected Syncing Microphones to Receiver Handheld Microphone: 1. Power on handheld microphone 2. Remove battery cover from microphone by twisting counter-clockwise 3. Aim bottom of microphone IR sensor within 6 inches of the receiver IR sensor 4. Press and hold CH button (Receiver RF LED and Microphone LED will Blink) IR Sensor 5. A solid RF LED will indicate that the microphone has successfully connected to the newly set RF channel.
Getting Connected Syncing Microphones to Receiver Body-Pack Transmitter 1. Power on Body-Pack Transmitter 2. Open Battery compartment by pinching tabs inward and lowering door forward 3. Aim Sync LED within 6 inches of the receiver IR sensor LED 4. Press and hold CH button (Receiver RF LED and Body-Pack LED will Blink) IR Sensor 5. A solid RF LED will indicate that the body-pack has successfully connected to the newly set RF channel.
Getting Connected TO CONNECT TO A MIXER BALANCED XLR 1. Connect balanced XLR cable (not included) to the balanced outputs of the Digital-34-Ultra receiver. 2. Connect each end of the XLR cable into individual microphone input jacks on a mixer to be used (Mic 1). Note: Example illustrated is for clarity only. For ease of operation, attach the channel 1 output to the channel 1 input on a mixer and the channel 2 output to the channel 2 input on a mixer.
Descriptions and Functions Receiver FRONT PANEL 1. 2. 3. 4. 5. Power ON/OFF Switch - Powers the receiver off/on. IR- Infrared sensor used for syncing wireless mics (see getting connected pg 8 & 9) Display- shows the current frequency channel setting RF- LED illuminates when microphone is successfully connected. CH- press to change frequency channel (see getting connected pg 8 & 9 for more advanced operations) 6. Volume knob- Adjusts overall Microphone volume.
Descriptions and Functions REAR PANEL 1. 2. 3. 4. Antenna- built in receptacle for catching RF signal Balanced Mic Out - Outputs microphone signal via XLR cable to mixer or amplifier. Unbalanced Out - Outputs mic signal via 1/4 cable to a mixer or amplifier.
Descriptions and Functions HANDHELD MICROPHONE 1. Mic Head - Picks up vocals 2. Mic ON/OFF/MUTE Switch – Hold to power microphone on/off. (on indicated by green LED) a.) MUTE – Push button once to mute the mic element but leave microphone powered on. This is indicated by a red LED. 3. Mic LED - Indicates microphone operational status (ON/MUTE/OFF) 4. Battery Compartment - Insert two (2x) AA batteries here to provide power.
Descriptions and Functions BODY-PACK TRANSMITTER 1. Antenna- assists with frequency transmission 2. LED- Indicates body-pack operational status (ON/MUTE/OFF) 3. ON/OFF/MUTE Switch – Hold to power body-pack on/off. (on indicated by green LED) a.) MUTE – Push button once to mute body-pack audio transmission. This is indicated by a red LED. 4. Mini XLR (TA3F male)- connect headset or instrument cable accessory here. 5. Battery Compartment- Insert two (2x) AA batteries here to provide power 6.
Features FEATURES • Each receiver comes packaged with Wireless Handheld Microphones as well as body pack transmitter with headset microphone and instrument cable for added versatility • 9 channel PLL frequencies designed to not interfere with each other • Integrate up to 9 systems with revolutionary “one-touch” IR sync • Utilizes the Sparsely Used 900mHz Frequency Band • 24-Bit Digital Technology delivers Clean, Professional Quality Signal • Individual Digital Microphone IDs Eliminate Channel Cross-Talk • W
Troubleshoot Troubleshooting Tips There is no power • Make sure the power cord is firmly connected to the power outlet. • If using a power strip/surge-protector, make sure that it is plugged in and switched on. *Please be advised that it is safe practice to power the DIGITAL-31/32/34 on in the following fashion: 1. Plug the power adapter into the “DC In” receptacle on the rear panel 2. Plug DC power adapter into wall outlet or surge protector/power strip 3.
Notes
Digital-34-Ultra Owner’s Manual © VocoPro 2018 v1.0510 www.vocopro.
