DigiNet Professional Wireless Audio System for Active Loudspeakers o w n e r ' s m a n u a l
Table of Contents FCC Information ...................................................... 4 Safety Instructions ................................................... 5 Welcome ............................................................... 6 Listening for a Lifetime ............................................. 7 Getting Started ....................................................... 8 Quick Start Guide .................................................... 9 Getting Connected ...................................
FCC Information CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 1. To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2.
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. 9.
Welcome And thank you for purchasing the DigiNet from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening for a Lifetime 6HOHFWLQJ ILQH DXGLR HTXLSPHQW VXFK DV WKH XQLW \RX·YH MXVW SXUFKDVHG LV RQO\ WKH VWDUW RI \RXU PXVLFDO HQMR\PHQW 1RZ LW·V WLPH WR FRQVLGHU KRZ \RX FDQ PD[LPL]H WKH IXQ DQG H[FLWHPHQW \RXU HTXLSPHQW RIIHUV 9RFR3UR DQG WKH (OHFWURQLF ,QGXVWULHV $VVRFLDWLRQ·V &RQVXPHU (OHFWURQLFV *URXS ZDQW \RX WR JHW WKH PRVW RXW RI \RXU HTXLSPHQW E\ SOD\LQJ LW DW D VDIH OHYHO 2QH WKDW OHWV WKH VRXQG FRPH WKURXJK ORXG DQG FOHDU ZLWKRXW DQQR\LQJ EODULQJ RU GLV
Getting Started What’s in the box? DigiNet ST DigiNet MR (x2) • • • • • • • Mono Receiver (x2) Stereo Transmitter USB Charging Cable (x3) XLR Cable (x3) Velco Strap (x3) RCA-1/4” Adapter (x2) Power Adapter (x3) (x2) (x2) (x3) DigiNet MT • • • • • • Mono Transmitter (Optional) USB Charging Cable (x3) XLR Cable (x3) Velco Strap (x3) RCA-1/4” Adapter (x2) Power Adapter (x3) (x3) (x2) 8
Quickstart Guide -Power on transmitter by holding down power button -LED lights will appear displaying the current transmission channel numbers *Be advised that the transmitter and receivers may actually be factory pre-synced and therefore already paired to communicate right out of the box -To manually adjust frequency channel: 1. Press and hold top or bottom (CH) buttons 2. The left column LEDs will now blink 3. Press Left/Right Channel button to toggle through A or B frequency sets 4.
Quickstart Guide There are 8 preset frequency channels within each group (A or B) After selecting A or B: 1. Press and hold Left/Right Channel button then press and hold once more until right column LED numbers are blinking 2. Press the Left/Right Channel buttons to increase the transmitting frequency channel number ID 3. Press Power button to finalize your channel number selection.
Getting Connected TRANSMITTER 1. Connect your source audio to the transmitter via male XLR or ¼” jack cable 2. Connect the power USB cable to the transmitter (*connect only if rechargeable battery does not have a sufficient charge) 3. Adjust your input source volume and then the transmitter output volume.
Getting Connected RECEIVER 1. Connect the receiver to a powered speaker or existing sound system set-up via Female XLR output connector 2.
Descriptions and Functions TRANSMITTER: (Front Panel) 1. Power/Select: Press and hold to power unit on/off. Press once to set final frequency channel selection 2. Volume Knob: Adjusts the overall output volume of the audio being transmitted 3. LED Displays: conveniently show frequency channel selection 4. Left/ Right Channel buttons: use these to re-sync transmitter and receiver onto a different frequency channel 5.
Descriptions and Functions RECEIVER: (Front Panel) 1. Power/Select: Press and hold to power unit on/off. Press once to set final frequency channel selection 2. RF SYNC LED: this light indicates when the receiver has successfully paired with the transmitter 3. Volume Knob: Adjusts the overall output volume of the signal received 4. Headphone Volume Knob: adjusts the signal volume sent to headphones 5. LED Display: shows current frequency reception channel 6.
Descriptions and Functions (Back Panel) 1. Antenna: Assists with increasing the transmission range (operating distance between transmitter and receiver) 2. MALE XLR Output: Outputs a balanced audio signal USING THE BALANCED XLR: - Connect the female end of a balanced XLR cable into the Balanced Output jack located on the back of the Digital-1 receiver. - Connect the male end of the balanced XLR cable into a balanced microphone input jack on the mixer or sound system being used. 3. Battery compartment 4.
Battery Replacement Battery Replacement: In the event that you should ever have to replace the rechargeable battery of the DigiNet components (transmitter or receiver), please follow the following installation instructions: 1. Make sure your DigiNet transmitter or receiver is powered off 2. With a Flathead screwdriver, turn the battery cover counter clockwise to gain access to battery. 3. After the cover is completely removed, tilt unit backwards and catch the discharged battery. 4.
Troubleshoot If you experience strange noises that do not sound like the audio being played, this may be indicative of frequency interference. Try the following: 1. Re-sync transmitter and receiver to a different operating frequency. 2. Check that cables are inserted firmly, at all input/output jacks, ensuring a solid connection. If you experience loss of audio from the receiver, this means the connection between transmitter and receiver is lost. Try the following: 1.
DigiNet Owner’s Manual © VocoPro 2018 v1.0328 www.vocopro.