Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix H: Client: Model #: Standards: FCC ID: Report #: Vocollect, Inc. TT-700 FCC 15.247 & RSS-210 MQOTT700-10000 2005147 Manual Please refer to the following pages.
Talkman® T5 System Version and Compliance • • • Version Declaration of Conformity Regulatory Policy Compliance • Talkman® T5 Federal Communications Commission Compliance • CE Marking & European Compliance Version For version information, please consult the Help | About menu option of any Vocollect application or check the release notes that accompanied the Vocollect Management Software™. Software Release Version Vocollect VoiceConsole™ Consult the release notes.
This product has been tested to the following standards: Standard European Union/ Manufacturers declaration of Conformity.
Vocollect terminals are designed to be compliant with the rules and regulations in the locations into which they are sold and are labeled as required. Vocollect terminals are type approved and do not require the user to obtain license or authorization before using them. Changes or modifications not expressly approved by Vocollect, Inc. could void the user's authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003.
CE Marking & European Compliance Products intended for sale within the European Union are marked with the CEMark, which indicates compliance to applicable Directives and European Normes (EN) as follows. Amendments to these Directives or ENs are included. Important Notice: This device is a 2.40 to 2.48 GHz RF device intended for office and light industrial use in all EU and EFTA member states.
Battery Information T-Series terminals are powered by batteries designed by, and specially made for Vocollect. The T5 battery is available in a high-capacity model. Only one battery is available for the T5 Terminal. Warning: Only the Vocollect Model # 730022 battery may be used with the T5 terminal. Use of any other battery is not allowed and may damage the terminal and the battery.
Belts & Belt Clips Operators wear terminals on a customized belt that is purchased from Vocollect. The terminal is attached to the belt with a specially designed clip. The clip is attached to the Vocollect belt at the beginning of a shift. Then, the operator can attach the terminal to and remove the terminal from the clip as often as necessary throughout the shift. Only one plastic belt clip is available for the T5 Terminal. The belts of different sizes do not contain metal.
Product Notes • To comply with government safety standards, the terminal must be used with the Vocollect belt and clip. • Operators must regard the belt clip and the terminal as two separate entities. The clip should be attached to the Vocollect belt at the beginning of a shift. Then, the operator can attach the terminal to and remove the terminal from the clip as often as necessary throughout the shift.