SmartCast™ Crave Go™ Multi-Room Speaker Download the Free VIZIO SmartCast™ App to get started QUICK START GUIDE Model: SP30-E0 English - 1 Please read this guide before using the product.
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • CAUTION: Please read the entire user manual carefully before using this product.
• Always use the accessories recommended by the manufacturer to insure compatibility. • When moving your unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your unit to avoid causing fire, electric shock, or component damage. • To ensure reliable operation of your unit and to protect it from overheating, be sure any openings are not blocked or covered.
TABLE OF CONTENTS Package contents................................................................................. 5 VIZIO SmartCast™ Easy Setup............................................................. 6 Pairing your Device using Wi-Fi........................................................... 7 How to Cast Content............................................................................ 8 Creating an Audio Group.....................................................................
PACKAGE CONTENTS Speaker Charger SmartCast™ Crave Go™ Multi-Room Speaker VIZIO SmartCast™ Crave Go™ Speaker Download the VIZIO SmartCast™ App to get started QUICK START GUIDE Model: SP30-E0 Please read this guide before using the product.
VIZIO SmartCast™ Easy Setup Download the Free VIZIO SmartCast™ App 1 2 Go to http://www.vizio.com/smartcastapp to get started.* Press LED power button on the back of the speaker to power on. 3 * English - 6 Plug in your Speaker A mobile device (Android™ 4.4+ smartphones and tablets; iOS 8.0+ iPhone®, iPad®, and iPod®) and VIZIO SmartCast App are required to setup your speaker. Chromecast–enabled apps may require a subscription to access certain content. Mobile device not included.
Pairing your Device using Wi-Fi If your device is not Bluetooth enabled or you are having trouble pairing, you can pair your device with the speaker using your Wi-Fi network. To pair through your Wi-Fi network: 1. Tap Connect Via Wi-Fi from the VIZIO SmartCast App’s pairing screen 2. Look for your speaker name, such as VIZIOCastAudioXXXX, on the list of discovered devices and tap to select. Follow the on-screen instructions to complete the setup wizard.
How to Cast Audio With Chromecast built-in, you can cast your favorite audio content from your device right to your speaker. Streaming audio content to your speaker is as simple as tapping an icon on your favorite app. 1. Open a Chromecast-enabled app, such as iHeartRadio 2. Choose something you want to listen to and tap the select your speaker. (Cast) button and 3. Press the play button to begin listening to your content.
CREATING AN AUDIO GROUP With Chromecast built-in, the multi-room playback capability allows you to create audio groups and cast different music or the same music to multiple speakers at the same time. Prior to creating an audio group, ensure all devices were set up using the VIZIO SmartCast App. To create an audio group: 1. Install and open the Google Home App. 2. Tap Devices to see a list of available audio devices and select a device. Tap the menu icon on the top right corner of the speaker window.
CONTROLS & CONNECTIONS AUX In for connecting audio devices** USB Power Out for charging* DC Power In Power Button w/ LED Indicator Play/Pause Content Volume Up/Down Bluetooth Pair Side of Speaker Back of Speaker Fold out kickstand *Note: Not all external devices can be charged from the speaker's USB out port. Charging rate may be slower than using your external device's original power cord. Charging your external device will reduce the speaker's battery life and playback time.
LED INDICATORS Description LED Behavior Off Speaker is off. Rapid pulsing white Speaker is starting up. Pulsing white Speaker is ready to be setup via the SmartCast App or connecting to a previous network. Solid White Speaker is connected to a network and ready to cast. Pulsing blue Speaker is in bluetooth discovery mode. Solid blue Speaker is bluetooth connected to device and ready to play audio. Pulsing red Error has occurred. Red Speaker battery is low.
CHARGING THE SPEAKER The Crave Go Speaker offers up to 6 hours* of playback time on a full charge. To charge your speaker: • Plug the charger into an outlet • Plug the other end of the charger into the back of the speaker It takes 3 hours to fully charge the speaker. If unplugged from the charger, the speaker will enter standby mode after 5 minutes of inactivity. When the speaker battery falls below 20%: • If streaming, the speaker will beep and the LED will glow red.
BLUETOOTH PAIRING *To pair the speaker with a Bluetooth device: 1. If the speaker is off, power it on by pressing the back LED button. Wait for the LED to be solid white or pulsing white. 2. Press and hold the Bluetooth button on the side of the speaker. When the speaker is in Bluetooth Pairing Mode, the LED power button will pulse blue and a pairing tone will be heard. If prevously paired to a device then a simple press of the Bluetooth button will reconnect the device. 3.
NEED HELP? Go to: support.vizio.
HELP & TROUBLESHOOTING There is no power. There is no sound. VIZIO SmartCast app isn’t working. LED button is pulsing red. • Plug the charger into the speaker and press the POWER LED button on the back of the speaker. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. • Ensure your speaker is fully charged. The speaker comes partially charged for first time setup but may have drained. • Increase the volume.
LIMITED WARRANTY UNITED STATES AND CANADA BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIZIO has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions apply. A Google account is required to download applications from the Google Play store. A MyVIZIO account is required to access certain features of the VIZIO SmartCast app.
© 2016 VIZIO INC. ALL RIGHTS RESERVED.