VIZIO QUICK START GUIDE Model: S4220w-E4
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • Read these instructions. • Keep these instructions. • Heed all warnings.
TABLE OF CONTENTS Table of Contents......................................................................3 Package Contents....................................................................4 Controls & Connections...........................................................5 FIrst-Time Setup.........................................................................7 Bluetooth Pairing.......................................................................12 Using Bluetooth Mode..................................
PACKAGE CONTENTS High Definition Sound Bar Power Cable 2 x Sound Bar Wall Mount Brackets Remote Control with Batteries Quick Start Guide Stereo RCA to 3.
CONTROLS & CONNECTIONS Back of Sound Bar Power Port (USB 5) USB Port (Digital 3) Coaxial In (Optical 4) Digital Optical Audio In 5 (Aux 1) Analog Audio In (Aux 2) Analog Audio In
Back of Sound Bar Control Buttons are located here: Power Input Bluetooth Input (Hold to force pair, See “Bluetooth Pairing” on page 12) + - 6 Volume
FIRST-TIME SETUP 1 Connect one of the included cables to ONE TV audio output as shown.* BETTER DIGITAL OPTICAL CABLE** Connection ports are located here: BETTER GOOD DIGITAL COAXIAL CABLE** 3.5MM TO RCA CABLE GOOD 3.5MM TO RCA CABLE CHOOSE ONE CABLE: BETTER GOOD AND CONNECT IT TO YOUR TV *Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2 Connect a power cable to the sound bar. 3 Plug the power cable into a power outlet.
3 Sound bar is centered below the TV. For the best surround sound experience, position the sound bar as shown. The sound bar should be close to ear level.
4 5 Top Top Remove the battery cover by gently sliding it away from the remote. 6 Insert the included batteries and gently slide the battery cover back into place. Input Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the sound bar to Input 1. Hardware setup is complete.
USING THE REMOTE Bluetooth Press to enter Bluetooth input. Input Press to change input source. (To enter force pair mode, press and hold for 5 seconds) Power Press to turn on or off. Enter/Play/Pause Press to select an option. Press to play or pause. Volume + Press to increase volume. Previous Press to return to previous track. Next Press to skip to the next track. (Changes Treble and Bass levels) (Changes Treble and Bass levels) Volume – Press to decrease volume.
BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar for five (5) seconds or use the BT Pair menu option from the remote (see “Adjusting Sound Bar Settings” on page 17). When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop flashing. 2.
USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar.
ADVANCED SETUP Connect up to five (5) different devices to the Sound Bar (devices shown are examples-you can use any device). Connection ports are located here: To listen to a device, change the input source on the Sound Bar. Optical, Coaxial, and 3.5mm cables transmit audio only. If connecting a video device, you will need a separate video connection from the device to your TV. USB THUMB DRIVE* DIGITAL OPTICAL CABLE Game Console *Supports .
WALL MOUNTING THE SOUND BAR 1 Back of Sound Bar Wall-Mount Screw Holes Insert and tighten two Wall-Mount Screws with a Phillips-head screwdriver into the Wall-Mount Screw Holes. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.
3 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. 15.75 in (400 mm) Wall Mount Screw Screw Size: M4 x 10 If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.
ADJUSTING SOUND BAR SETTINGS LED Indicators are located here: Press the button on the remote (indicated in the table below) to access the different functions and acoustic settings of the Sound Bar. The LED Indicators will behave differently with each function. Function LED Behavior Bluetooth Pairing (When searching for device) Flash from Left to Right and back continuously. Description Hold the Bluetooth button on the remote for 5 seconds.
Function LED Behavior DTS TruSurround On/Off Surround On: TSHD Surround Off: Description Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), TruSurround will produce a wider sound for a more enjoyable listening experience.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. • Press MUTE on the remote to ensure the Sound Bar is not muted.
DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: http://store.VIZIO.
VIZIO RECOMMENDS Introducing the new E-series slim frame design. The VIZIO E-series LED TV is shattering the mold in a way only VIZIO can, with high-quality design and picture at the best value. With a stunningly slim outer frame design – and LED with 1080p Full HD for rich colors and vivid details, this HDTV gives you the best picture at the best value. Available at www.VIZIO.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
