VIZIO QUICK START GUIDE Model: S2920w-C0R
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • Do not overload power strips and extension cords.
PACKAGE CONTENTS High Definition Sound Bar Remote Control with Batteries This Quick Start Guide Power Adapter Stereo RCA to 3.
CONTROLS & CONNECTIONS Back of Sound Bar AUX (1) Analog Audio In SUB OUT Subwoofer Out Power Port DIGITAL (3) Coaxial In OPTICAL (4) Digital Optical Audio In AUX (2) Analog Audio In Service Port* *For use by authorized service center only.
Back of Sound Bar Control Buttons are located here: Power Input Bluetooth Input (Hold to force pair, See ‘Bluetooth Pairing’ for more information) + - Volume
FIRST-TIME SETUP Back of Sound Bar 1 GOOD 3.5MM TO RCA CABLE BETTER GOOD DIGITAL COAXIAL CABLE*† 3.5MM TO RCA CABLE BETTER DIGITAL OPTICAL CABLE† CHOOSE ONE CABLE: BETTER GOOD AND CONNECT IT TO YOUR TV Note: Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual. *Coaxial cable not included.
2 Connect the Power Adapter to the Sound Bar. 3 Plug the Power Adapter into a power outlet.
4 Sound Bar is centered below the TV. For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level.
5 Top 6 Top Remove the battery cover by gently sliding it away from the remote. 7 Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1. Hardware setup is complete. Insert the included batteries and gently slide the battery cover back into place.
USING THE REMOTE Input Press to change input source. Volume + Press to increase volume. Previous Press to return to previous track. (Changes Treble and Bass levels) Bluetooth Press to enter Bluetooth input. (To enter force pair mode, press and hold for 5 seconds) Power Press to turn on or off. Enter/Play/Pause Press to select an option. Press to play or pause. Next Press to skip to the next track. (Changes Treble and Bass levels) TruVolume Press to enable/disable TruVolume.
LED INDICATORS LED Indicators are located here: The LED Indicators will behave differently with each button on the remote control.
BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop flashing. 2. You can now search for the Sound Bar (VIZIO S2920w) using your Bluetooth device.
USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar.
ADVANCED SETUP Connect up to four (4) different devices to the Sound Bar (devices shown are examples you can use any device). Back of Sound Bar To listen to a device, change the input source on the Sound Bar. Optical, Coaxial, and 3.5mm cables transmit audio only. If connecting a video device, you will need a separate video connection from the device to your TV. RCA AUDIO CABLE Game Console DIGITAL COAXIAL CABLE DIGITAL OPTICAL CABLE Network Media Player 3.
CONNECTING A SUBWOOFER Back of Sound Bar RCA Subwoofer Cable* Optional Subwoofer* For best results setting up an optional subwoofer, VIZIO suggests the following procedure: 1. Press the BASS button on the remote control to enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the bass level to the center position. 3. Power Off the Sound Bar and Subwoofer. Connect an RCA cable from the sound bar to the subwoofer. 4. Power On the Sound Bar and Subwoofer. 5.
WALL MOUNTING THE SOUND BAR 1 Back of Sound Bar Wall-Mount Screw Holes Insert and tighten two Wall-Mount Screws with a Phillips-head screwdriver into the Wall-Mount Screw Holes. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.
3 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. 16.5 in (420 mm) Wall Mount Screw Screw Size: M4 x 10 If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.
BUTTON CONFIGURATION There are 3 Functions that are triggered by 3 different button combinations on the Sound Bar. Function LED Behavior Description Factory Reset All 12 LEDs will flash 3 times: Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Note: This will erase all settings and preferences that you have set.
DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: http://store.VIZIO.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. • Press MUTE on the remote to ensure the Sound Bar is not muted.
VIZIO RECOMMENDS M-Series Razor LED Smart TV TM The all-new VIZIO M-Series Razor LED™ Smart TV with Theater 3D® has arrived. With an ultra-modern design, brilliant Razor LED™ picture quality, and the new, faster VIZIO Internet Apps Plus™ Smart TV experience, it’s the must-have entertainment upgrade you’ve been waiting for. Available at VIZIO.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2013 VIZIO INC. ALL RIGHTS RESERVED.
