ACTIVE NOISE CANCELLING HIGH DEFINITION HEADPHONES WITH WIRELESS DOCK FOR iPod® XVTHP200 – QUICK START GUIDE
IMPORTANT SAFETY INFORMATION Long-term exposure to loud music may cause hearing damage. Avoid extreme volume when using headphones, especially for extended periods. Do not use headphones while operating a motor vehicle or a bicycle. Doing so is dangerous and may violate local laws and regulations. Sounds that you rely on as reminders or warnings may have an unfamiliar character when using headphones. Be aware of how these sounds may vary in character so you can recogize them as needed.
PACKAGE CONTENTS High Definition Headphones Wireless Dock Quick Start Guide Power Adapter for Wireless Dock iPod Trays (3) 3.
CONTROLS AND CONNECTIONS Headphones Charging Contacts Adjustable Headband (Both Sides) Left/Right Ear Indicator (Both sides) Volume Up Active Noise Reduction SRS Power Volume Down Next Charging Port Input 3.
Wireless Dock - Rear Front Charging Contacts Input Lights Charging Light SRS Lights SPDIF Audio In Charging Contacts: Charging Light: Input: iPod Dock: Audio In: SPDIF: Audio Out: Dolby Digital Light Input iPod Dock DC In Pair Audio Out Hub/ Power Client Must touch headphone contacts to charge Turns on when headphones are charging Change audio source Connect iPod to use as audio source Connect analog audio device Connect digital audio device Connect analog receiver or powered speakers DC In: Conn
FIRST-TIME SETUP 1 2 Connect the power adapter to the DC IN port on the wireless dock. Connect the other end of the power adapter to an electrical outlet. Do not connect the travel charger to the dock. 3 4 4 Charge the headphones by placing them on the top of the wireless dock. Ensure the charging contacts are touching. Allow the headphones to fully charge. When the headphones are charging, the charging light is on and the power button on the headphones is red.
5 6 Ensure the HUB/CLIENT switch is in the HUB position. Turn on the wireless dock by pressing the Power button. Remove the headphones from the wireless dock. Turn on the headphones. Press and hold the Power button for 2 seconds, then release. The wireless dock is on when the lights on the front are on. When the headphones are on, the Power button is green. 7 The wireless dock and headphones are ready to use. See Listening to Your iPod on page 6 or Listening to Your Devices on page 8.
LISTENING TO YOUR iPod 1 Fingernail Slot 2 Made for: • iPhone 4 • iPhone 3GS • iPod with video (5th generation) (60GB and 80GB only) • iPod Nano (6th generation) (8GB and 16GB only) Complete First-Time Setup on page 4. Place your iPod/iPhone in the wireless dock. Locate the tray that fits your iPod/iPhone, then place it in the wireless dock. Trays can be removed by lifting from the fingernail slot. Ensure your iPod/iPhone is inserted completely.
5 6 OR Play/Pause You can also use the controls on your iPod/iPhone. Press the INPUT button on the wireless dock or the INP button on the headphones until the input light on the wireless dock displays iPod. 7 To play or pause your music, press the Play/Pause button on the headphones. 8 Next Volume Up Previous Volume Down You can also use the controls on your iPod/iPhone. To play the next track, press the Next button on the headphones.
LISTENING TO YOUR DEVICES 1 SPDIF/Optical Cable* Best Sound SPDIF SPDIF RCA Audio Cable Good Sound AUDIO IN AUDIO OUT *SPDIF/Optical Cable Not Included Complete First-Time Setup on page 4, then choose the best connection to the wireless dock. Connect a SPDIF/optical or RCA audio cable from your device to the wireless dock as shown. Remember, you can connect two devices - one device to each port. 2 Turn on the wireless dock by pressing the Power button.
4 5 OR Remove the headphones from the wireless dock. Turn on the headphones. Press and hold the Power button for 2 seconds, then release. Press the INPUT button on the wireless dock or the INP button on the headphones until the input light on the wireless dock displays SPDIF or AUX (AUDIO IN). The headphones are on when the Power button is green.
USING THE DOCK TO PLAY YOUR iPod ON YOUR HOME STEREO 1 RCA Audio Cable AUDIO OUT AUDIO IN Complete First-Time Setup on page 4. Connect your home stereo to the wireless dock using an RCA audio cable as shown. (Devices differ–see your home stereo’s user manual for details.) 2 10 3 Turn on the wireless dock by pressing the Power button. Turn on your home stereo. The wireless dock is on when the lights on the front are on.
4 5 iPod Place your iPod/iPhone in the iPod dock. Ensure your iPod/iPhone is inserted completely. Press the INPUT button on the wireless dock until the input light on the wireless dock displays iPod. 6 You can now share your iPod/iPhone music on your home stereo. Use the controls on your iPod/iPhone to play, pause, or change tracks. Use the volume controls on your home stereo to increase or decrease volume.
TRAVELING WITH YOUR HEADPHONES Your headphones are comfortable, portable, and feature Noise Cancellation, all of which make them the perfect travel companion. And because they feature a 3.5mm audio port, you can connect them to an in-flight entertainment system or your favorite media device. Your headphones include the following travel accessories: • 3.5mm Audio Cable • Travel Charger • Charging Cable • Travel Case For the best travel experience with your headphones, follow the tips on this page.
USING SRS TRUVOLUME AND SRS TRUSURROUND HD What is SRS TruVolume? SRS TruVolume eliminates volume spikes, enabling you to enjoy your music, television, movies, and other media at a comfortable and consistent volume level. What is SRS TruSurround HD? SRS TruSurround HD provides an enhanced listening experience for your music, movies, television, games, and other media. SRS technology creates “phantom” speakers that seem to extend all around the listener, producing an amazing surround sound effect.
WIRELESS HD AUDIO (WHDA) UNWIRE YOUR HOME THEATER Break the constraints of unsightly cables and wires. Free your sound systems from the limitations of their cords. Unleash your audio and bring a whole new listening experience to your HDTV system. Introducing VIZIO’s intelligent, Wireless HD Audio (WHDA) featuring Dolby Digital, SRS TruSurround™ and SRS TruVolume™. CRYSTAL CLEAR AUDIO Never before has sound been like this.
HELP TOPICS There is no power. • Fully charge the battery each time you charge the headphones. See First-Time Setup on page 4. • Press the Power button on the rear of the wireless dock. Ensure the lights on the front of the dock are on. • Press and hold the Power button for 2 seconds to turn the headphones on. • Ensure the power adapter for the wireless dock, not the travel charger, is securely connected to the DC IN port. There is no sound. • Increase the volume.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRADEMARKS SHOWN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. VIZIO, THE V LOGO, WHERE VISION MEETS VALUE, AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC. PRODUCT FEATURES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. © 2010 VIZIO INC. ALL RIGHTS RESERVED.
