VlZtO GV42L FHDTV10A User Manual Dear VlZlO Customer, Congratulations on your new VlZlO GV42L FHDTVl0A LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VlZtO GV42L FHDTVl0A Television. For assistance, please call 949-428-2525 mail us at techsupport@vizio.
VlZtOGV42LFHDTV10A UserManual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display.
VtZtOGV42LFHDTV10A UserManual TeLevision External Antenna TeLevision ConneGbion Antenna Protection Groundinq If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VlZtOGV42LFHDTV10A UserManual Openinq the Packaqe Your VtZlO GV42L FHDTVl0A and it accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the GV42L FHDTVl 0A is in good condition and that all of the accessories are included. The GV42L FHDTVl0A weighs approximately 681bs and about 42" wide x 30" tall we strongly advise that you have at least 2 people to unpack and install the HDTV.
VlZlOGV42LFHDTV10A UserManual GV42L Certified FHDTVI®A TV Accessories are sold separateLv Wall Mounts High Definition Cables Extra or replacement Remote VtZlO also offers FHDTVl0A Installation Services and Extended Warranty Services for your VlZlO GV42L To purchase or inquire about additional accessories and services for your VlZlO product, visit our web site at www.vizio.
VlZlOGV42LFHDTV10A UserManual Preparinq Your Leo HOTV WaLL Nountinq The VlZlO GV42L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing, tf you choose to mount the GV42L FHDTVl0A on the wall, please follow the instructions below for removing the stand base. To find the perfect mount for the VlZlO GV42L FHDTVl0A, browse VlZtO's certified mount selection at www.VlZIO.com or call directly 888-VlZtOCE (888-849-4623). To remove the stand base 1.
VlZtOGV42LFHDTV10A UserManual To memove the speakems If you wish to remove the attached speakers as well and use your Home Theatre System for the audio, please follow the procedure below. 1. Unplug the speaker wires from the GV42L FHDTVl 0A at the rear of the TV set by carefully pulling down on these two 5-DIN pin connectors. 2. Remove the four (4) screws that hold the right speaker in place and remove the speaker. The screws are identified by arrows molded into the plastic.
VtZtOGV42LFHDTV10A UserManual Relocate Detachable SpeaRems If you decide to relocate or place speaker's assemblies away from the TV set, it is recommendable follow the procedure or steps shown below. to 1. Select the place and then measure the distance from new location to the TV set. 2. Make sure that the extension cables follow the pattern shown below. 3.
VlZlOGV42LFHDTV10A UserManual TabLe of Contents ChBpt°er i Basic Contracts 8rid Oonneot°ioms ................................................................ ii 1.1 Front Bezel ........................................................................................................................................................ 11 1.2 Right Side Panel Controls ................................................................................................................................. 1.
VlZtOGV42LFHDTV10A UserManual 4.5.1 Tuner 4.5.2 Mode ............................................................................................................................................... 44 Auto Search .............................................................................................................................................. 44 4.5.3 Skip Channel ................................................................................................................................
VlZtOGV42LFHDTV10A UserManual Chapter 1 Basic 101 Front Bezet Cantrats and Connections Power 'VlZlO' light - The VIZlO name lights white when powered on and orange when powered off. Remote Control Sensor - This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Riqht Side Panet Controts Power ( t,_ ) _ Switch the GV42L FHDTV10A on by pressing the button once.
VlZtO GV42L FHDTV10A User Manual 103 Rear Lefit Hand PameL Side Commeotioms Portion T , _i ¸_ . L(_}?"_ _..... SPEAKER - Connection for right speaker. 2. AC IN - Plug-in the supplied AC Power Cord here. 3. SERVICE - This custom communication 4. HDMI 1 - Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white band on the rear of the TV Indicates this connection.
VlZtOGV42LFHDTV10A UserManual Riqht Portion _DiO IN L_ 11. OPTICAL DIGITAL AUDIO OUT - When the DTV input is selected for viewing, the digital audio associated with digital programming will be available on this SPDtF Optical connector for connection to your home theatre system. If an analog signal is been supplied then stereo audio would be the audio coming out your home theatre system. The gray color band on the rear of the TV indicates this connection. 12.
VlZlO GV42L FHDTV10A User Manual YIZIO Universak Remote Control The VlZtO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages. Remote LED - Blinks when the remote operates. This button starts all programming of the Remote Control. _ress this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. This button selects a programmed DVD player.
VlZtOGV42LFHDTV10A UserManual UsethisbuttonfortheOn-Screen Display(OSD)menus. Thisbuttondisplaystheimageandsysteminformation display. Use the NaVigationWheelto operatethe On-Screen Display(OSD)afterit has beenactivatedby pressing theMENUbutton. Usethe OK buttonto selectyourchosenoptionin OnScreenDisplay(OSD)menus. 6UIDE- This buttondisplaysprograminformation.Noo: fiis buto_iso_y u_ctio_ao_ DTV. EXIT- ThisbuttonexitstheOn-Screen Display(OSD)menus. VOL(+or -)- Thesebuttonsturnthevolumeupor down.
VlZtOGV42LFHDTV10A UserManual WhenCABLEis selectedandthecodeto matchyourCableBoxhasbeenentered,thisbutton willoperatetheCableBoxthesameasthisbuttononyourCableRemote. WhenCABLEis selectedandthecodetomatchyourCableBoxhasbeenentered,thisbuttonwill operatetheCableBoxthesameas thisbuttononyourCableRemote. WhenCABLEis selectedandthe codeto matchyourCableBox hasbeenentered,thisbuttonwill operatethe CableBoxthe same as this buttonon yourCableRemote.
VlZlOGV42LFHDTV10A UserManual m,4,m Insertion of Batteries in the Remote EontroL Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VtZtOGV42LFHDTV10A UserManual Chapter 2oi Which Connectinq Video Equipment Connecbion Shou{d I Use? The VIZIO GV42L FHDTVIOA has sixdifferent ways to connect your video equipment from a basic connectiontothemost advanced fordigital displays. HDMI Best White (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, all-digital audio/video interface.
VlZtOGV42LFHDTV10A UserManual Noe: Formorefnlo_dero }e QuickStar Gufde 2°2 Conneotinq 2o2ol Using Your Cable or Sate[Ute @OH HOM_ Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Connectinq . 2. . 4. your Cabte or SatelUte Box {Best} Turn off the power to the LCD HDTV and HDTV Set-Top Box.
VlZlOGV42LFHDTV10A UserManual For Gable or SatelUte Boxes with Dgl: Us . Turn off the power to the LCD HDTV and HDTV Set-Top Box. 2. Using a HDMI-DVl cable, connect the DVl end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the LCD HDTV. .
VtZtOGV42LFHDTV10A UserManual ,_:;++i++++I Turn off the power to the LCD HDTV and HDTV Set-Top Box. I. 2. . . . . 7. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
VtZtO GV42L FHDTV10A User Manual a+3 Connectinq a+3+l Usinq Your Coaxia!. [RF] Antenna or Oiqital CabLe for OTV +++++++++41 Turn off the power to the LCD HDTV. I. 2. + 4. Connect the coaxial (RF) connector from your antenna or digital cable to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV. Turn on the power to the LCD HDTV. Select DTV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control.
VtZtOGV42LFHDTV10A UserManual a+3°a UsinQ Your or Antenna Cable for TV ++++I+FS@ Turn off the power to the LCD HDTV. I. 2. . 4. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV Turn on the power to the LCD HDTV. Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control.
VlZtOGV42LFHDTV10A UserManual a.4 Connectinq Your DVD PLayer You have several options for connecting your DVD player to your GV42L FHDTVl0A - HDMt, Component, S-Video and Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the right one for you. 2,4,1 Usinq HOMJ DVD players that have a digital interface such as HDMI (High Definition Multimedia connected to the HDMI input of the VlZtO GV42L FHDTVl0A for optimal results.
VlZlOGV42LFHDTV10A UserManual For DUD . Plavers with Ogl _ Turn off the power to the LCD HDTV and DVD player. 2. Using a HDMI-DVl cable, connect the DVl end to your DVD player and the HDMI end to the HDMI Input (white color area) at the rear of the LCD HDTV. .
VlZlOGV42LFHDTV10A UserManual 2°4°2 Usinq Connectinq . 2. . . Component youm DUD Jideo mkayem [Bettem}: Turn off the power to the LCD HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
VlZtOGV42LFHDTV10A UserManual a.4.3 Using Connecting . 2. . . 5. SoVideo your DVD {RV1} PLayer {Good}: Turn off the power to the LCD HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AVl on the left hand side of the LCD HDTV.
VlZtOGV42LFHDTV10A UserManual 2°4°4 Usinq Conneotinq . 2. . . 5. Composite your OVO {RV2} m[avem Video {Good}: Turn off the power to the LCD HDTV and DVD player. Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV2 input (orange color area) row of connectors at the rear of the LCD HDTV.
VtZtOGV42LFHDTV10A UserManual a.S Connectinq Your YEA or Video Camera I. Turn off the power to the LCD HDTV and VCR or Video Camera. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AVl group at the rear right hand side connections of the LCD HDTV. . . 5.
VlZlOGV42LFHDTV10A UserManual *_4)DIO BN LiO' RO . 2. . Turn off the power to the LCD HDTV and Receiver/Amp ........ Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (gray area) audio connectors at the rear of the LCD HDTV. Turn on the power to the LCD HDTV and Receiver/Amp. 4. Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu. 5.
VlZtOGV42LFHDTV10A UserManual 2.7 Conneatinq . a PC Computer Turn off the power to the LCD HDTV and PC Computer. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (purple area) at the rear of the LCD HDTV. 3. Connect the Audio Out on your pc computer to the RGB PC Audio input (purple area) at the rear of the LCD HDTV. 4. Turn on the power to the LCD HDTV and PC Computer. 5.
VlZtOGV42LFHDTV10A UserManual 2.7.1 Pmeset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920x1080 at 60Hz to display best picture quality; refer to the chart in Section 2.7.2. If video card does not support this 1920x1080 settings, please try1360x768 at 60Hz for the next to best picture quality or resolution. Please follow these values of this chart to have the TV set to display set at the desired resolution. 640x480 60 31.5 59.94 N N 25.
VtZtOGV42LFHDTV10A UserManual Chapter 3 Se inq Up to Watch TeLevision For 'Preparing Your LCD HDTV for Wall Mounting', see page 6. 3.1 Basic . . 3. . . LCD HDTV Start Up Connecting the Power Cable Connect the power cord to the power cord connector on the back of the LCD HDTV, and then plug the power cord into an AC wall socket.
VlZtOGV42LFHDTV10A UserManual The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the OSD language to Fran£ais or Espa_ol, press the a button on the remote control to select the language you want. b. Press the _ button on the remote to go to the next screen. The Tuner screen will be displayed; default choice is Antenna. If you are using Cable, press the a button to highlight CABLE. Press the I_ button on the remote to go to the next screen. d.
VlZtOGV42LFHDTV10A UserManual Press the OK button to start the search. An information panel will be displayed showing the progress of the search for analog (NTSC) and Digital (ATSC) channels. e. Nob: DTV digila b_oadcas is no avaiabe in a aeas Re[xe_ o www.antennaweb.
VlZtOGV42LFHDTV10A UserManual 3.a Watchinq a TY Proqram Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. . . . 3,3 Press the power button on the remote or on the side of the LCD HDTV. The status of the VlZlO the front will change from orange to white.
VlZtOGV42LFHDTVIOA UserManual 3.4 Proqram Information Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner of the panel. Press the D or _ button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel.
VlZlOGV42LFHDTV10A UserManual Chaptec A Rdvanced A°i Usinq the On off RdOostmenb Screen DispLay HDTV {OSD} The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture, Audio, Setup, TV and Parental.
VlZlOGV42LFHDTV10A UserManual 4.2 / TV DTV 40s01 PicbuFe input Piobure Rd]ustmenb Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE menu. Press the i_button to highlight the Picture Mode selection. Use theD or _ button to choose from Custom, Standard, Movie and Game. If Standard, Movie or Game is chosen for the Picture Mode, then the only Picture adjustment available for you is for the Backlight; the rest are preset. 4.2_2 Press the selection.
VlZtOGV42LFHDTV10A UserManual 4,2,3 Contrast Press the Q button to highlight the Contrast selection. Press the_ button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so 3u can see the contrast level between the minimum and maximum available levels. Use the D or button to adjust the level.
VlZtOGV42LFHDTV10A UserManual 4.2.7 Press the a Sharpness button to highlight the Sharpness selection. Press the _ button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels. Use the D or _ button to adjust the level. The Sharpness adjusts the sharpness of the picture. 4.2.
VlZtOGV42LFHDTV10A UserManual 4.3 Rdvanced Video Press the a button to highlight the option for Advanced Video selection and press the OK button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. A°3°i DNR Press the _, button to highlight DNR (Dynamic Noise Reduction). Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture.
VlZlOGV42LFHDTV10A UserManual 4.4 DTV 4o4oi / TV Input Rudio Rd]usbmenb Votume When the MENU button is pressed, the On Screen Display (OSD) shows the PICTURE menu page. Press the q button to display the AUDIO Menu page. Press the a button to highlight the Volume selection. Press theq button to start adjusting the volume and the menu page will disappear and be replaced by a small Volume Indicator Bar so you can see the volume level between the zero and maximum available levels.
VlZtOGV42LFHDTV10A UserManual 4.4.$ Surround Press the a button to highlight the Surround selection. Press the _ 4.4.6 button to select for the simulated surround sound feature to be On or Off. Speakers Press the a button to highlight the Speakers selection. Press the _ button to turn the internal speakers On or Off. You may want to turn-off the internal speakers when listening to the audio through your Home Theatre System. 4.
VlZtOGV42LFHDTV10A UserManual 4.5.4 Oiqita[ Press the _ Rudio Out button to select this feature. The options are Off, Dolby Digital and PCM. Press the D or _button to select the desired output when an external sound system is used. 4°So8 Time Zone SettingthecorrectTime Zone foryour area will ensure that the correctprogram times are shown afterpressingthe GUIDE buttonon theremote control. Press the _ buttontohighlight theTime Zone selection. Press the _ buttontoselectyourarea.
VlZtOGV42LFHDTV10A UserManual 4.6 DTV 4°6.1 / TV Input Setup Lanquaqe When the MENU button is pressed, the On Screen Display (OSD) shows the PICTURE menu page. Press the_ button until the SETUP page is displayed. Press the _1_ button to highlight the Language selection. The default is English. Press the _ button to select Fran_ais or Espa5ol. 4°B.2 SLeep Timer Press the _button to highlight the Sleep Timer selection. turn-off the TV in 30, 60, 90 or 120 minutes. A.
VlZtOGV42LFHDTV10A UserManual 4°6.5 OiqitaL CLosed Caption StyLe When selecting Digital Closed Caption you are also able to customize the look of the Closed Caption. Press the _ button to highlight the Digital CC Style selection. The default is As Broadcaster which means the style is the same as the broadcast channel has chosen for transmission. Press the _ button to select Custom.
VlZlO GV42L FHDTV10A User Manual 4,7 DTV 4.7.i / TV Channek Input Parental Eontro{ Bkock If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) shows the PICTURE menu page. Press the_button to display the PARENTAL menu page.
VtZtOGV42LFHDTV10A UserManual 4°7.2 TV Ratinq Follow the procedure in the previous section 4.7.1 to display the Parental Control menu and then press the _ button to highlight the TV Rating selection. Press the I_ button and the Block TV Rating panel will be displayed.
VlZtOGV42LFHDTV10A UserManual 4.7.3 Movie Press the _ Press the _ Ratinq button to highlight the Movie Rating selection. button and the Block Movie Rating panel will be displayed.
VlZtOGV42LFHDTV10A UserManual 4.8 HDMI Input Picture Rd]ustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 4,q HDMI Input Rudio Rdoustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.4.
VlZlOGV42LFHDTV10A UserManual 4.ira Video input Pictume Rdoustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. q°m2 Video input Rudio RdOustmemt The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.4.
VlZtOGV42LFHDTV10A UserManual 4,14 Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.7. The menu difference is that there is no icon along the top for DTV / TV adjustments. A.15 PC input Piobure Rd3usbmemb The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2 for Backlight, Contrast, Brightness and Color Temperature.
VlZtOGV42LFHDTV10A UserManual 4.1So3 Press theQ Briqhtness buttontohighlight theBrightnessselection. Press the_ buttonto start adjusting thebrightness and themenu page will disappearand be replacedby a smallBrightnessIndicator Bar so you can see thebrightness levelbetween theminimum and maximum available levels. Use the D or _ button to adjust the level. The Brightness adjusts the black levels in the picture.
VlZlOGV42LFHDTV10A UserManual ¢i5,5 [oLor Temperature Press the a button to highlight the option for Color Temperature selection. The default is COOL; this is the 9300K setting. Press the D or _ button if you want to choose the Normal or Custom option. If you choose the Custom option, then a new menu will be displayed showing the primary color items, Red, Green and Blue. Press the a button to highlight the color you wish to adjust.
VtZtOGV42LFHDTV10A UserManual 4,1B PC Input Rudio Rd]ustment The Audio Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.4. The menu difference is that there are no icons along the top for DTV / TV and Parental Control adjustments. 4,17 PE Input Setup The Setup menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for TV adjustments and no Closed Caption.
VlZlOGV42LFHDTV10A UserManual 4.18 Understandinq Viewinq Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is added to the left and right of the display image. displayed with a 4:3 Aspect Ratio. Movies in 4:3 to as pan-and-scan or full frame. These movies (widescreen), and then modified to fit a traditional preserved, so black bars are Standard TV broadcasts are Aspect Ratio may be referred were originally filmed in 16:9 TV screen (4:3).
VlZtOGV42LFHDTV10A UserManual 4o18ol PiotureohqoPioture (PIP} Mode Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you can display two pictures at one time. One picture is displayed as the full screen (main screen) and the other picture is displayed in a small window (sub screen). The sub-screen can be set to three different sizes. Press _i button to highlight the PIP selection and press the _lbutton.
VlZtOGV42LFHDTV10A UserManual Position Press the_button to highlight Position and press the _ or a button to choose where on the picture you want the PIP screen positioned over the main screen. Size Press the_ button to highlight Size function and press the Dor_ button to choose Small, Medium or Large. See section 1.
VlZtOGV42LFHDTV10A UserManual Theabovefive picturescorrespond to the five differenttypesof inputwhichcomebuiltin this TV set. Keepin mindthatsomeoftheseinputsstillhavemorethanone;like,AVl andAV2,HDMI1andHDMI2, andComponent1 andCompnent2. 401803 How to setecb PIP/POP The following steps could be used as a guideline to use the features either PIP or POP which come built in to you TV set. Please look into the previous chart where the combinations that apply to your setup or inputs are shown.
VlZtOGV42LFHDTV10A UserManual If on Step6 PIPis selectedthen: 12. Pressthe _lb buttonon PiPmenuscreentothedesiredoption;INPUT,SIZEor POSITION 13. It is recommended to selectthesizeof the screenfirst;the optionsbeingSmall,Mediumand Large. 14. Pressthe a buttontoscrolldowntosize(itwillchangetoyellowcolor) 15. Pressthe D or 0 buttontomakeyourselection;itwilltakeatleastthreetimesof pressingthe samebuttontogothroughthechoices. 16. Nowthatthesizehasbeenchosenyouwouldliketoselectthelocation(position). 17.
VlZlOGV42LFHDTV10A UserManual 4,1q ProgramminQ the VIZlO Universal Remote Contro[ You can program the remote control to work with up to four different pieces of equipment including your VlZlO GV42L FHDTVl0A. Listed below are the steps for programming your VCR, Cable Box and DVD Player. 4.1q.1 Proqrammin9 riot VCR 1. 2. Manually turn on the VCR. Press the VCR button on the remote control. 3. Press and hold the SET button until the LED LIGHT flashes twice. 4.
VlZtOGV42LFHDTV10A UserManual 4 1q 3 Proqramminq for OVO PLayer 1. Manually turn on the DVD Player. 2. Press the DVD button on the remote control. 3. Press and hold the SET button until the LED LIGHT flashes twice. 4. Find the programming code for your DVD player in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
VlZlOGV42LFHDTV10A UserManual Chapter and S Maintenance Troubleshootinq S.1 Maintenance I. Make sure that the power cable is removed from the socket before cleaning the TV. 2. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cteaninq the Housinq and Remote Contro[ Use the VIZlO soft cloth (included) for cleaning. . 2.
VtZtOGV42LFHDTV10A UserManual image. Wrong output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc. or abnormal colors appear. Control buttons Remote work. do not work. Control does Adjust brightness Check Source settings. If any colors (red, green, is securely connected. Press only not and contrast.
VlZtOGV42LFHDTV10A UserManual Tips for High-Definition Users. The LCD HDTV Best Image However, distortions Tips for Users. Letterbox Content cycle 5.3 Telephone Quality (or for viewing will be achieved due to variances can occur. Letterboxed formatted expanding accuracy. is an ideal platform in "Widescreen") by the HDMI broadcast versions High Definition Input, then YPbPr, practices, of Content. DVD it then is possible movies are RGB.
VlZlOGV42LFHDTV10A UserManual 5.5 FEE Glass B Radio Intem_emence Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VtZtOGV42LFHDTV10A UserManual Chapter 8 MisceLLaneous Information Sol Speaiffiaations Panel 42" Diagonal, Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.485mm 16:9 Aspect (H) x 0.485mm Display/Signal Compatibility 1080P Colors 16.
VlZlOGV42LFHDTV10A UserManual 8.a GlossaFv ° StandaFd Oefiinitions Analog TV: Today's TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV "aspect ratio", that is, the screen's width as compared to its height. For example, a "32 inch TV screen" would be 25 inches wide and 19 inches tall. Aspect Ratio (16x9): "Wide screen TV" aspect ratio which is more like a movie screen than a traditional TV.
VlZtO GV42L FHDTV10A User Manual 6.
VlZtOGV42LFHDTV10A UserManual Using an external Receiver Amp, 28 Audio Adjustment, 43 Parental Control, 48 Picture Adjustment, 39 P Parental Special Features, Tuner Setup, 46 TV Audio Adjust Balance, 43 Bass, 43 Control Block Unrated Programming, Movie Rating, 49 Parental Lock Enable, 48 Password change, 50 Simulated 50 TV Rating, 49 PC Input Audio Adjustment, 53 PC Picture Adjust Auto Adjust, 52 Fine Tune, 52 Horizontal Position, Horizontal Size, 52 Vertical Position, PIP and POP Inputs,
VlZtOGV42LFHDTV10A UserManual B.
VlZtO GV42L FHDTV10A User Manual Pioneer 20042, 20067 Tatung 20045, 20067 Polk Audio 20081 Technics 20035, 20162 Profitronic 20240 Teco Proscan 20060 20035, 20037, 20048, 20038 Protec 20072 Teknika 20035, 20037 Pulsar 20039 Tivo 20636, 20618, 21503, 20739 Qisheng 20060 TMK 20240 Quasar 20035, 20162 Toshiba Radix 20037 Randex 20037 20045, 20042, 20067, 20043, 21503, 21008, 21972 RCA 20060, 20035, 20240, 20042, 20880 Realistic 20035, 20037, 20048, 20047, 20104 Totevision
VlZtOGV42LFHDTV10A UserManual 20796,21056, 21937,20794, 21020,21915 Torx 00003 JVC 00775 Toshiba 00000 LG 01414,01226 BIaupunkt 20717 Trans PX 00276 Magnavox 00724,00722 Blue Parade 20571 Tristar 00883 Memorex 00724 Broksonic 20695 TS 00003 Mitsubishi 00749 Changhong 20627,21061 V2 00883 Motorola 00869 CineVision 20869 Viewmaster 00883 NEC 01270 Coby 21086 Vision 00883 NextLevel 00869 Cu_is Mathes 21087 Vortex View 00883 Panasonic 00247,00701 CyberHome Ze
VlZtO GV42L FHDTV10A User Manual Lite-On 21158, 21058 SVA 20717 Miro 30000 Loewe 205 ! 1 Sylvania 20675 Mission 30157 Symphonic 20675 MTC 30420 Teac 20717, 21984, 20809 NSM 30157 Onkyo 30868, 30101 Technics 20490 Optimus Theta Digital 20571 Toshiba 20503, 20695 31063, 30032, 30420, 31075, V, Inc.
VlZtO GV42L FHDTV10A User Manual Zonda 30157 Bose 30674 GE 30078 JVC 30331 Marantz 30321 Nakamichi 30321 NEC 30264 Advent 10761, 10842 Aiko 10092 Aiwa 11914 Akai 10812, 10702, 10030, 10672, 11903 AIbatron 10700, 10843 America Action 10180 Anam 10250, 10180, 10700 30842, 30135 Anam National 10250, 10650 Optimus 31023, 30670, 30531,31074 Anhua 10051 AOC 10451, 10093, 10180, 10060, 10030, 10178, 10092 Apex Digital !0748, 10765, 10879, 10767, 11943 Audiovox 10451, 10180,
VlZtOGV42LFHDTV10A UserManual Citizen 10060, 10030, 11928, 10092 Clarion !0180 Commercial Solutions 11447, 10047 Conrowa 10156,10145, 11156 Contec 10180 Craig 10180 CrosIey 10054 Crown 10180 Curtis Mathes 10047,10054, 10154,10451, 10093,10060, 10702,10030, 10145,10166 Gateway 11756,11755 Kangli 10661 GE 11447,10047, 11454,10051, 10451,10180, 10030,10178, 11917,10092, 11907,11922 KEC 10180 Kenwood 10030 KLH 10765,10767 Kolin 10180,10150, 10053 KTV 10180,10030 Kunlun 10051,
VlZtOGV42LFHDTV10A UserManual NAD 10156,10178, 10866 Quasar 10250, 10051, 11924, 10650 National 10051 RadioShack NEC 10154,10156, 10051,10053, 10030,10178, 11704 10047, 10154, 10180, 10030, 10178, 11920, 11904 RCA 11447,10047, 11454,10000, 10030,10178, 11547,11922, 11917,10092, 11907,11948, 10090,10679 Newave 10093,10178, 10092 Nikko 10039,10178, 10092 Norcent 19748,10824 NTC 10092 Onwa Optimus Realistic 10154,10180, 10030,10178 10180 Rowa 10748 10154, 10250, 10166,10650, 11927,11
VlZtO GV42L FHDTV10A User Manual TVS 10463 Vidtech 10178 VlZlO 11758, 11756, 10885, 10864 Viewsonic 11755,10885, 10864 Vector Research 10030 Wards Victor 10250, 10053, 10650 Vidikron 10054 Version 6/18/2007 10054, 10030, 10178,10866, 11156 Warumaia 10661 Waycon 10156 79 www.VlZlO.