VIZIO VOJ320F1A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VOJ320F1A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VOJ320F1A High Definition Television. For assistance, please call (877) 698-4946 or e-mail us at techsupport@vizio.com.
VIZIO VOJ320F1A User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference.
VIZIO VOJ320F1A User Manual ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near your HDTV and easily accessible. Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
VIZIO VOJ320F1A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VOJ320F1A User Manual Opening the Package Your VIZIO VOJ320F1A and accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VOJ320F1A is in good condition and that all of the accessories are included. The VOJ320F1A weighs approximately 28 lbs and is about 32” wide; please exercise care when unpacking the HDTV.
VIZIO VOJ320F1A User Manual Additional Certified Accessories for the VIZIO VOJ320F1A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VOJ320F1A To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.
VIZIO VOJ320F1A User Manual TV Setup and Stand Assembly Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. To unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the two top foam end caps. 3. Remove the stand base under foam end cap. 4. Remove the TV from the box and lay it face down on a clean, flat surface.
VIZIO VOJ320F1A User Manual Preparing Your LCD HDTV for Wall Mounting To remove the stand base 5. Unplug all of the cables and cords from your VOJ320F1A. 6. Place the VOJ320F1A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 7. Push up the plastic panel on the back of the stand and lift it away once to release. 8. Remove the eight (8) screws that were hidden by the panel, while holding the base. 9. Carefully remove the stand base.
VIZIO VOJ320F1A User Manual Table of Contents Chapter 1 Basic Controls and Connections.......................................................... 11 1.1 Front Panel........................................................................................................................................................11 1.2 Side Panel Controls...........................................................................................................................................11 1.3 Rear Panel Connections .
VIZIO VOJ320F1A User Manual 4.4 DTV / TV Tuner Setup.......................................................................................................................................47 4.4.1 Tuner Mode ...............................................................................................................................................47 4.4.2 Auto Search..............................................................................................................................................
VIZIO VOJ320F1A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Side Panel Controls POWER ( ) – Switch the VOJ320F1A on by pressing the button once.
VIZIO VOJ320F1A User Manual 1.3 Rear Panel Connections 1 3 2 4 5 6 1. 8 9 10 7 SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment. 2. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 3.
VIZIO VOJ320F1A User Manual 1.4 Right-Side Panel Connection 1. HEADPHONE – Connect your headphone here for personalized listening without disturbing others. 2. AV2 – Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source, then use the yellow connector to connect the external video from the same source. The orange color band on the side of the TV indicates this connection.
VIZIO VOJ320F1A User Manual 1.5 VIZIO Remote Control GUIDE – This button displays program information. Press this button once when in TV mode and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen will display the selected input plus the definition of the signal; i.e. HDMI 720p, HDMI 1080i, etc. POWER – Press this button to turn the TV on from the Standby mode.
VIZIO VOJ320F1A User Manual 1.5.1 Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VOJ320F1A User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO VOJ320F1A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
VIZIO VOJ320F1A User Manual 2.2 Connecting Coaxial (RF) 2.2.1 Using Your Antenna or Digital Cable for DTV 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector on the rear of the HDTV. Turn on the power to the HDTV. Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
VIZIO VOJ320F1A User Manual 2.3 Connecting Your HDTV Set-Top Box 2.3.1 Using HDMI Input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10 meters. See www.VIZIOCE.com or call 1-888-VIZIOCE (1-888-849-4623) for details. Connecting your HDTV Set-Top Box (Best): 1. 2. 3. 4. Turn off the power to the HDTV and HDTV Set-Top Box.
VIZIO VOJ320F1A User Manual For HDTV Set-Top Boxes with DVI: 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 Input (white color area) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.3.2 Using Component Video Connecting your HDTV Set-Top Box (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.4 Connecting Your Basic Set-Top Box 2.4.1 Using Composite Video 1. 2. 3. 4. 5. Turn off the power to the HDTV and Set-Top Box. Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV1 input (yellow color area) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.5 Connecting Your DVD Player You have several options for connecting your DVD player to your VOJ320F1A; HDMI, Component, AV (SVideo or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2.5.1 Using HDMI Input DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VOJ320F1A for optimal results.
VIZIO VOJ320F1A User Manual For DVD Players with DVI: 1. 2. 4. 5. Turn off the HDTV and DVD player. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI2 end to the HDMI Input (white color area) at the rear of the HDTV. 3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.5.2 Using Component Video Connecting your DVD Player (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component1 input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.5.3 Using S-Video (AV1/S-VIDEO) Connecting your DVD Player (Good): 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the SVideo jack in the AV1/S-VIDEO input (yellow/red area) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.6 Connecting Your VCR or Video Camera 1. 2. 3. 4. 5. Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the SVideo jack in the AV input (yellow/red area) at the rear of the HDTV.
VIZIO VOJ320F1A User Manual 2.7 Connecting an external Receiver/Amp 1. 2. 3. Turn off the power to the LCD HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the LCD HDTV. Turn on the power to the LCD HDTV and Receiver/Amp. button on the remote control to open the On-Screen Display (OSD) 4. Then press the menu. 5.
VIZIO VOJ320F1A User Manual 2.7.1 Optical Output of Audio received If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VOJ320F1A. 1. 2. 3. Turn off the power to the LCD HDTV and Receiver/Amp. Using an SPDIF cable, connect the cable to the audio input connector on the Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors at the rear of the LCD HDTV.
VIZIO VOJ320F1A User Manual 2.8 Connecting a PC Computer 1. 2. 3. 4. 5. Turn off the power to the HDTV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV. Turn on the HDTV and PC Computer. Select RGB using the INPUT button on the remote or side of the HDTV.
VIZIO VOJ320F1A User Manual 2.8.1 Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920x1080 at 60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). Please see the table below for the factory preset resolutions. Resolution Refresh (Hz) H.Freq (kHz) V.Freq (Hz) H.Sync V.Sync Pixel Rate (MHz) Remark 640x480 60 31.46 59.94 N N 25.17 Windows 640x480 75 37.50 75.00 N N 31.
VIZIO VOJ320F1A User Manual Chapter 3 Setting Up to Watch Television For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 8. 3.1 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see Chapter 2 for detailed steps) 3.
VIZIO VOJ320F1A User Manual b. The Channel Scan screen will be displayed; default choice is Scan. Press the button on the remote control to commence the search for available channels to be stored into memory. If you do not want to scan for channels at this time, press the button on the remote to highlight Skip Scan and then press the button.
VIZIO VOJ320F1A User Manual c. The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels. Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get information about availability in your area, type of antenna and in which direction to point your antenna. The channel availability through cable depends upon which channels your cable operator supplies in Clear QAM; consult your cable operator for more information. d.
VIZIO VOJ320F1A User Manual a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red and White) connectors, HDMI connectors or Separate-Video (S-Video) plus Red and White connectors (if applicable). Make the physical connection or hook up. b. If you have an HD service you must use the HDMI (best) or Component connection. Note: Composite (AV) and S-Video Cables can only be used for SD (480i) pictures. c.
VIZIO VOJ320F1A User Manual d. Press the button to select it. or button to change e. Press either setting to Normal, and then press the LAST key again to go back to previous screen. f. or Press either the Picture Mode option. button to select or button to change the g. Press either Picture Mode option to Standard. h. Press the LAST key to exit the on screen display Menu.
VIZIO VOJ320F1A User Manual 3.2 Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO VOJ320F1A User Manual 3.3 Adjusting Basic HDTV Settings Volume To adjust the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH+ or CH- button on the side of the HDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate in DTV and TV modes.
VIZIO VOJ320F1A User Manual 3.4 Program Information Press the GUIDE button twice on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner. or button to scroll up or down the channels. Each time you pause at a channel, the Press the program list will update with the program schedule for the channel and the window will show the live program for that channel.
VIZIO VOJ320F1A User Manual Chapter 4 Advanced Adjustment of HDTV 4.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture Adjust, Audio Adjust, Setup and TV Tuner Setup.
VIZIO VOJ320F1A User Manual 4.2 DTV / TV Input Picture Adjustment 4.2.1 Picture Mode When the page. Press the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment button to highlight the Picture Mode selection. or Use the and Baseball. button to choose from Custom, Standard, Movie, Game, Vivid, Football, Golf, Basketball Picture Adjustments are available for you to set them to your preferred settings.
VIZIO VOJ320F1A User Manual 4.2.3 Brightness Press the button to highlight the Brightness selection. button to start adjusting the brightness and the menu page will disappear and be replaced Press the by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the or button to adjust the level. The Brightness adjusts the black levels in the picture.
VIZIO VOJ320F1A User Manual 4.2.6 Tint Press the button to highlight the Tint selection. button to start adjusting the tint and the menu page will disappear and be replaced by a Press the small Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position. Use the or button to adjust the level. The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance.
VIZIO VOJ320F1A User Manual Color Enhancement Press the button to highlight Color Enhancement. Use this feature to increase the picture reproduction performance of the picture. or button to choose from Off, Normal, Rich Color, Green/Flesh and Green/Blue setting. Press the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Advanced Adaptive Luma Press the button to highlight Advanced Adaptive Luma.
VIZIO VOJ320F1A User Manual 4.2.9 Reset Picture Mode Press the button to highlight the option for Reset Picture Mode selection button to return on Picture settings to Press factory default. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: Only settings under the pictures adjustment tab will be reset. 4.3 DTV / TV Input Audio Adjustment 4.3.1 Audio Mode When the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page.
VIZIO VOJ320F1A User Manual 4.3.2 Equalizer Press the button to highlight the Equalizer selection. Press the button to start adjusting A new menu will be displayed showing volumes of different frequencies (pitches). Starting from lowest to the highest pitch, they are 120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz. button to highlight the frequency you Press the wish to adjust. or button to adjust for boost or Use the attenuation.
VIZIO VOJ320F1A User Manual 4.3.5 Digital Audio Out Press the button to highlight the Digital Audio Out selection. or button to make the proper selection. The options are OFF, Dolby Digital and PCM. Press the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.3.6 Speakers Press the button to highlight the Speakers selection. or button to turn the internal speakers On or Off.
VIZIO VOJ320F1A User Manual 4.3.9 Reset Audio Mode Press the button to highlight the option for Reset Audio Mode selection button to return on Audio settings to Press factory default. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: Only settings under the audio adjustment tab will be reset. 4.4 DTV / TV Tuner Setup When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup screens.
VIZIO VOJ320F1A User Manual 4.4.3 Partial Channel Search If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. button to highlight the Partial Press the Channel Search selection. Press the button to enter the submenu. button to select scan mode to look Press the for Analog, Digital, or both Analog/Digital channels. button to highlight the “To” and Press the “From” selection.
VIZIO VOJ320F1A User Manual 4.4.7 Daylight Saving As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the button to highlight the Daylight Saving selection. or button to select On or Off. Press the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.5 DTV / TV Input Setup 4.5.
VIZIO VOJ320F1A User Manual 4.5.4 Input Naming This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both. Press button to highlight this option. Press button to obtain the next screen which shows the different inputs. button to select the desired input which you want to label or name (Examples: VCR, DVD,.., Press etc.
VIZIO VOJ320F1A User Manual 4.5.5 CC (Closed Caption) Press the button to highlight the CC (Closed Caption) selection. button. A separate menu will appear Press the with the following CC settings CC When watching regular analog (NTSC) TV, the CC feature is available in the Setup menu. Press the button to highlight the CC selection. button to select CC1, CC2, CC3 or Press the CC4. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VIZIO VOJ320F1A User Manual 4.5.6 H/V Position Press the selection. button to highlight the H/V Position button. A separate menu will appear Press the with the following H/V Position settings H. Position Press the button to highlight the Horizontal Shift selection. button to start adjusting the Press the horizontal position of the picture. or button to adjust the horizontal Use the position. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. V.
VIZIO VOJ320F1A User Manual 4.5.7 DTV / TV Input Parental Control If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the SETUP page.
VIZIO VOJ320F1A User Manual 4.5.8 Channel Block button to highlight the Channel Press the Block selection. Press the button to go to the next screen. button to highlight the channel you Press the want to block. Press the button to block the highlighted channel. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.5.
VIZIO VOJ320F1A User Manual 4.5.10 US Movie Rating (For US) Press the button to highlight the US Movie Rating selection. button and the Block Movie Rating Press the panel will be displayed.
VIZIO VOJ320F1A User Manual 4.5.12 Canadian French Rating Press the button to highlight the Canadian French Rating selection. button and the Block Canadian Press the French Rating panel will be displayed.
VIZIO VOJ320F1A User Manual 4.5.14 Blocked Unrated Programming Follow the procedure in the previous section 4.5.7 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection. button to turn-on or turn-off the Press the blocking of programming that does not have a rating. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.5.15 Change the Password button to highlight the Access Code Press the Edit selection.
VIZIO VOJ320F1A User Manual 4.5.16 Reset All Settings Press the button to highlight the Reset All Settings selection. button to reset the TV to the default Press the factory settings. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: This does NOT reset the Parental Control Password. 4.6 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2.
VIZIO VOJ320F1A User Manual 4.8 HDMI Input Setup The Setup menu operates in the same way for the HDMI Input as for the TV input in section 4.4. The menu difference is that there is no DTV / TV or Parental Control adjustments. 4.9 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.
VIZIO VOJ320F1A User Manual 4.11 Video Input Setup The Setup menu operates in a similar way for Video Inputs (Component and AV) as for the TV input in section 4.4. The menu difference is that there is an auto phase setting under the H/V Position submenu when using Component input. Auto Phase (for Component input) Press the button to highlight the H/V Position. button and the new H/V Position Press the submenu will be displayed. Press the button to highlight Auto Phase. button to execute this option.
VIZIO VOJ320F1A User Manual 4.13 PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2 for Backlight, Contrast, Brightness and Color Temperature. 4.13.1 Auto Adjust When the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. button to highlight the Auto Adjust Press the selection. button for the LCD HDTV to adjust Press the to the PC signal timing automatically.
VIZIO VOJ320F1A User Manual 4.13.4 Contrast Press the button to highlight the Contrast selection. button to start adjusting the contrast and the menu page will disappear and be replaced by Press the a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels. Use the or button to adjust the level. The Contrast adjusts the white levels in the picture.
VIZIO VOJ320F1A User Manual 4.13.6 H-SIZE Press the button to highlight the H-Size selection. Press the button to start adjusting the horizontal size of the picture. or button to adjust the horizontal size. Use the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.13.7 H. Position Press the button to highlight the Horizontal Shift selection. button to start adjusting the Press the horizontal position of the picture.
VIZIO VOJ320F1A User Manual 4.14 PC Input Audio Adjustment The Audio Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.3. The menu difference is that there are no icons along the top for DTV / TV and Parental Control adjustments. 4.15 PC Input Setup The Setup menu operates in the same way for the PC Input as for the DTV / TV input in section 4.4. The menu difference is that there is no icon along the top for TV adjustments and no Closed Caption.
VIZIO VOJ320F1A User Manual 4.16 Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 37. 4.16.1 Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO VOJ320F1A User Manual Chapter 5 Maintenance and Troubleshooting 5.1 Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use a soft cloth for cleaning.
VIZIO VOJ320F1A User Manual 5.2 Troubleshooting Guide If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (6984946) or e-mail us at techsupport@vizio.com. Problem Solution No power. Make sure the power button is ON (White VIZIO Logo).
VIZIO VOJ320F1A User Manual Problem Solution The display image does not cover the entire screen. If you are using RGB mode, make sure that H Size and V Position in the On Screen Display (OSD) are set correctly. If you are using TV, AV-C (Composite), AV-S (S-Video) or Component with 480i input, follow instructions in page 49 to obtain the desired screen mode. You can see a picture but you cannot hear sound. Make sure that the volume is not turned down. Make sure that the sound is not muted.
VIZIO VOJ320F1A User Manual 5.4 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 5.5 FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VOJ320F1A User Manual Chapter 6 Miscellaneous Information 6.1 Specifications Specifications Panel 32” Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.36375mm (H) x 0.36375mm (V) Display Compatibility FHDTV (1080P) Colors 1.
VIZIO VOJ320F1A User Manual Dimensions 31.57"W x 22.38"H x 8.58"D (802mm x 568mm x 218mm) with stand 31.57"W x 21.13"H x 4.13"D (802mm x 537mm x 105mm) without stand Net Weight 26 lbs without stand, 27.56 lbs with stand Gross Weight 36.6 lbs Certifications CSA C/US, FCC Class B, BETS-7 *Product specifications may change without notice or obligation. 6.2 Glossary – Standard Definitions Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound.
VIZIO VOJ320F1A User Manual Limited Product Warranty VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. VIZIO's Responsibility VIZIO displays purchased new from an authorized VIZIO U.S.
VIZIO VOJ320F1A User Manual limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE.
VIZIO VOJ320F1A User Manual customer will be provided with an on-site repair authorization number and on-site repair instructions. The determination for performing the on-site repair may be dependent upon the manufacturing defect and is at VIZIO's option and sole discretion. Proof of purchase is required to confirm the product is within the oneyear limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
VIZIO VOJ320F1A User Manual Index A Accessories, 6 Adjustments Selecting the Screen Size, 71 Stepping through TV Channels, 37 Volume, 11, 37, 67 Advanced Video Features Black Level Extender, 43 Color Temperature (Color Temperature, 43 CTI (Color Transient Improvement, 43 DNR (Dynamic Noise Reduction, 42 Flesh Tone, 43 C Cleaning your VIZIO TV, 66 Coax (RF) Connecting for DTV, 17 Connecting your Basic Set Top Box, 21 Component Connecting your DVD Player, 24 Connecting your HDTV Set-Top Box, 20 Composite (A
VIZIO VOJ320F1A User Manual P Parental Control Block Unrated Programming, 57 Canadian English Rating, 55 Canadian French Rating, 56 Channel Block, 54 DTV Rating, 56 Movie Rating, 55 Password change, 57 TV Rating, 54 PC Input Audio Adjustment, 64 Auto Adjust, 61 Picture Adjustment, 61 Setup, 64 PC Picture Adjust Fine Tune, 63 H/V Position, 52 Horizontal Position, 52, 63 Horizontal Size, 52, 63 Vertical Position, 52, 63 R Remote, 14 Batteries, 15 Range, 15 Remote:, 15 RGB Connecting your PC, 29 S safety in