VIZIO USER MANUAL Model: M321i-A2 & M471i-A2
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
Welcome THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel.
• • Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel. WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Table of Contents Installing the TV................................................. 3 Adjusting the Picture Size and Position............................ 22 Inspecting the Package Contents...................................... 3 Adjusting the Color Temperature..................................... 22 Installing the TV.................................................................... 3 Adjusting the Advanced Picture Settings......................... 23 Installing the TV Stand.........................
Accessing the Parental Controls Menu............................ 37 Deleting an App from the My Apps Tab........................... 52 Enabling or Disabling Program Ratings............................ 38 Moving an App in My Apps.............................................. 53 Locking and Unlocking Channels.................................... 38 Troubleshooting & Technical Support............... 54 Blocking and Unblocking Content by Rating...................
1 Installing the TV INSPECTING THE PACKAGE CONTENTS INSTALLING THE TV Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. After removing the TV from the box and inspecting the package contents you can begin installing the TV.
1 To install the base: 1. It is recommended that two people take part in the base installation. 2. Align the Neck piece with the Base. 3. Use a Phillips screwdriver to insert and tighten the four(4) included M5 x 14mm Phillips screws into the holes on the bottom of the Base. Remove any plastic wrapping from the TV and the stand. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a blanket.
1 Installing the TV on a Wall BACK OF TV To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. M321i-A2 M471i-A2 Screw Size: M4 M6 Screw Pitch: 0.70mm 1.
Controls and Connections 2 BACK PANEL USB - Connect USB thumb drive to play photo, music, or video. Component/Composite - Connect component or composite device. HDMI - Connect HDMI device. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. HDMI - Connect HDMI device. Stereo Audio Out - Connect RCA audio device, such as sound bar. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Ethernet - Connect Ethernet cable from home network.
2 FRONT PANEL REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor.
2 REMOTE CONTROL DEVICE POWER Turn devices on or off. INPUT Change the currently displayed input. APP LAUNCHER Quickly launch the pictured App. POWER Turn TV on or off. INPUT A/V CONTROLS Control USB media player and video streaming playback. LIST Display the channel guide when using a set-top box. EXIT Close the on-screen menu. LIST MENU EXIT INFO VOLUME UP/DOWN Increase or decrease loudness of the audio. BACK GUIDE VOL CH 3D V BUTTON Open the VIZIO Internet Apps Plus™ (V.I.A. Plus) dock.
2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
3 Connecting Your Devices CONNECTING A DEVICE Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc).
3 CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES AV CABLE COAXIAL CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your TV. Video signals are sent over the yellow connector while audio is sent over the red and white connectors. Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector.
3 COMPONENT CABLE HDMI CABLE Component cables are designed to carry high definition video signals along with additional audio connections. Colors are delivered with color information split up three different ways over three connectors for video (separated into Red, Blue and Green signals) and the left and right audio connectors (Red and White). HDMI is the intelligent, all-digital interface that delivers both dazzling quality and unmatched ease of use.
3 CONNECTING AN AUDIO DEVICE Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has an audio port that matches an available port on the TV (Optical, RCA, etc). Home Audio Receiver 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar HDMI CABLE BEST • ARC 2-WAY COMMUNICATION • 2.0-5.
3 CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES RCA CABLE OPTICAL/SPDIF CABLE HDMI CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your audio device. Audio signals are sent over the red and white connectors. Optical/SPDIF cables transmit audio signals as pulses of light through a cable made of plastic fibers. Audio signals are digitally transmitted between devices.
3 CONNECTING AN AUDIO DEVICE - ARC Without HDMI ARC With HDMI ARC Built-in Tuner Built-in Tuner VIZIO Internet Apps Plus™ VIZIO Internet Apps Plus™ Your TV Without an HDMI ARC setup, your TV will transmit audio signal from the built-in tuner and VIA apps to your home audio receiver through a separate audio connection.
3 CONNECTING TO YOUR NETWORK Your TV is internet-ready. It can be connected to your home network with a Wired or Wireless connection. Connecting to a Wired Network (Best) Connecting to a Wireless Network 1. Ensure you have a router or modem broadcasting as high-speed wireless signal (802.11n recommended). 2. Use the Guided Network Setup to configure the TV. See Using the Guided Setup Menu on page 43. 1. Connect an Ethernet cable to your router and to the Ethernet port on the back of the TV. See below. 2.
Completing the First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. • Your devices should be connected. • If you have a wireless network, have the network password ready. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the TV.
4 7. Enter your First Name, Last Name, Phone Number, ZIP Code, and E-mail Address using the on-screen keyboard. 10. When you have finished the device setup, highlight Exit to Live TV and press OK. The First-Time Setup is complete. Highlight Next and press OK. Use the Arrow and OK buttons on the remote to answer the questions about your time zone and daylight saving time, then highlight Next and press OK. 8.
5 Using the On-Screen Menu INPUT NAVIGATING THE ON-SCREEN MENU Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote. You can also open the on-screen menu by pressing the VIA button and selecting HDTV Settings from the VIA Dock, then pressing OK.
5 CHANGING THE INPUT SOURCE CHANGING THE SCREEN ASPECT RATIO External devices such as DVD players, Blu-ray players, and video game consoles can be connected to your TV. To use one of these devices with your TV, you must first change the input source in the on-screen menu. The TV can display images in five different modes: Normal, Panoramic, Wide, Stretch, and Zoom. Each mode displays the picture differently. To change the screen aspect ratio: To change the input device: 1.
5 ADJUSTING THE PICTURE SETTINGS • Computer mode optimizes the picture settings for displaying computer output. Your TV display can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Picture and press OK. The PICTURE menu is displayed. 3.
5 Adjusting the Picture Size and Position When displaying an image, the size and position of the display image can be adjusted. The size and position adjustments depend on signal source. To adjust the picture size and position: 1. From the PICTURE menu, use the Arrow buttons on the remote to highlight More, then press OK. 2. Use the Arrow buttons on the remote to highlight Size & Position, then press OK. The SIZE & POSITION menu is displayed.
5 Adjusting the Advanced Picture Settings 4. When you have finished adjusting the Advanced Picture Settings, press the EXIT button on the remote. To adjust the advanced picture settings: 1. From the PICTURE menu, use the Arrow buttons on the remote to highlight More, then press OK. 2. Use the Arrow buttons on the remote to highlight Advanced Picture, then press OK. The ADVANCED PICTURE menu is displayed.
5 ADJUSTING THE AUDIO SETTINGS When an external audio device is set up, TV Speakers is automatically set to Off and Volume Control is set to External. To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3.
5 • —or— ACTIVATING THE SLEEP TIMER Highlight EQ Mode and then press the Left/Right Arrow buttons to select Advanced. Adjust each frequency. When activated, the TV’s sleep timer will turn the TV off after a set period of time. To use the sleep timer: • Reset Audio Mode - Restores the audio settings to the factory defaults. See Resetting the Audio Settings on page 25. 1. Press the MENU button on the remote. The on-screen menu is displayed. 4.
5 Setting the Auto Power Off Feature USING THE NETWORK CONNECTION MENU To help save energy, your TV is set by default to turn off after 10 minutes if no signal is being displayed on the screen. This feature can be deactivated. Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. To set the Auto Power Off feature: Connecting to a Wireless Network 1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Auto Power Off and press OK.
5 Changing the Manual Setup Settings Connecting to a Hidden Network Advanced users can fine-tune the network settings using the Manual Setup feature. To connect to a wireless network whose network name (SSID) is not being broadcast: To change advanced network settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 1. From the NETWORK menu, highlight Manual Setup and press OK. The MANUAL SETUP menu is displayed. 2.
5 USING THE TUNER MENU Testing Your Network Connection To test your network connection: You can use the TV’s Tuner menu to: 1. From the NETWORK menu, highlight Test Connection and press OK. 2. The TEST CONNECTION screen displays the connection method, network name, signal strength, and download speed of your network connection. 3. Press the EXIT button on the remote.
5 Selecting a Tuner Input Adding New Channels Select the type of tuner input you will be using.You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections. Occasionally, you may need to add a new analog channel or add a new range of channels. You can do this by using the Partial Channel Search and Add Analog Channel options. 1. From the TUNER menu, highlight Tuner Mode and press OK. The TUNER MODE menu displays. To add a range of new channels: 2.
5 To add a single new analog channel: Skipping Channels 1. From the TUNER menu, highlight Add Analog Channel and press OK. The ADD ANALOG CHANNEL menu is displayed. After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from Normal the TV’sPanoramic memory with the Skip Channel feature. Wide Zoom 2.
5 Changing the Audio Language To use the Digital Language feature: Some digital free over-to-air and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in Secondary Audio Programming (SAP). SAP allows you to listen to broadcasts in multiple languages. 1. From the TUNER menu, highlight Digital Language and press OK. The DIGITAL LANGUAGE menu is displayed. Not all programs are broadcast in multiple languages.
5 SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. To activate or deactivate closed captions: 2. Use the Arrow buttons on the remote to highlight Closed Captions and press OK. The CLOSED CAPTIONS menu is displayed. 2. Use the Left/Right Arrow buttons on the remote to select Custom. The DIGITAL CC STYLE menu appears as shown.
LIST 5 MENU EXIT INFO INPUT SETTING UP DEVICES Pairing a VIZIO Remote Control You can use the TV remote control to power on/off and control various devices (Blu-ray players, Cable box, VCR, etc.) connected through the HDMI and component inputs. To view the devices set up with the remote control: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Up/Down Arrow buttons on the remote to highlight Devices and press OK. The DEVICES menu is displayed. 3.
5 Pairing a New Device 6. Make sure the device is turned on and connected to the input your selected. Highlight Continue and press OK. You can control devices connected to your TV by pairing them. To pair a device: 1. From the DEVICES menu, use the Arrow buttons on the remote to highlight Add New Device and press OK. The setup app is displayed. 7. Point the remote at the device (not your TV), and press the Device-Power button INPUT next to the INPUT button. 2.
5 Unpairing a Device To unpair a device: 1. From the DEVICES menu, use the Arrow buttons on the remote to highlight the device you want to unpair and press OK. The Device Status Information page displays. 2. Use the Up/Down buttons to highlight Unpair and press OK. The device is unpaired. 3. Press the EXIT button on the remote control.
5 CHANGING THE TV SETTINGS Viewing System Information To display a summary of the TV settings: Using the System menu, you can: • View the System Information • Name the TV inputs • Set up Parental Controls • Change the on-screen menu language Name Input • Set the time Menu Language • Adjust the CEC settings • Adjust the Power Indicator settings • 1. Press the MENU button on the remote. The on-screen menu is displayed. VIZIO SYSTEM 2.
5 Changing the Names of the Inputs Using the Parental Controls To make it easier to recognize the different devices attached to the inputs on your TV, you can rename the inputs. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player”. The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. To change the name of an input: To access the Parental Controls menu: 1.
5 Enabling or Disabling Program Ratings To manage program content according to its rating, you must enable the Program Rating feature. To enable or disable the Program Rating feature: 1. From the PARENTAL CONTROLS menu, highlight Rating Enable and press OK. The RATING ENABLE menu is displayed. 2. Select On or Off and press OK.
5 Changing the Parental Control Passcode Changing the On-Screen Menu Language If you use the parental controls, you should change the passcode to prevent children from accessing inappropriate material. Your TV can display the on-screen menu in different languages. To change the parental control passcode: To change the on-screen menu language: 1. Press the MENU button on the remote. The on-screen menu is displayed. 1. From the PARENTAL CONTROLS menu, highlight Change PIN and press OK.
5 Setting the Time Zone Adjusting the CEC Settings To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone: The CEC function on your TV enables you to control HDMI-connected devices with the included remote without any additional programming. To have the TV display the correct time, you must be connected to the Internet via an Ethernet cable or a wireless network. 1. Press the MENU button on the remote. The on-screen menu is displayed.
5 Turning the Power Indicator On or Off USING THE RESET & ADMIN MENU The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on. You can use the TV’s Reset & Admin menu to: To turn the Power Indicator Light on or off: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
5 Resetting the TV Settings Restoring the TV to Factory Default Settings To reset the TV’s picture and audio settings: All of the on-screen menu settings can be reset to the factory defaults. 1. Press the MENU button on the remote. The on-screen menu is displayed. If you restore the TV to the factory default settings, all changes you have made to the settings will be lost! This includes any V.I.A. Plus Apps that you have added and any changes you have made to the settings for those apps. 2.
5 USING THE GUIDED SETUP MENU Using Guided Setup The TV’s Setup App can be used to easily set up the TV tuner, remote control, and connected devices, or to connect the TV with your network. To use guided setup: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Highlight Guided Setup and press OK. 3.
5 USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel, input, and display information. • Press the INFO or GUIDE button two times to display the program title, program rating, audio information, and the start and end times of the program.
6 Using the USB Media Player USING THE USB MEDIA PLAYER Playing USB Media The USB Media Player allows you to connect a USB thumb drive to your TV and play music, video, or photos. To play USB media, you must first save your music or images onto a USB thumb drive. Remember: • The USB thumb drive must be formatted as FAT32. • Files on the USB thumb drive must end in a supported file extension (.mp3, .jpg, etc). • The player is not designed to play media from external hard drives or mp3 players.
6 Back Button Highlight this button and press OK if you would like to return to the previous screen. Connected Sources Displays connected USB devices. VIZIO Progress Bar Displays the duration of the currently-playing song. The blue bar will lengthen as the song progresses. Album Art If included on the USB thumb drive and associated with your music, the album art will display here.
6 Back Button Highlight this button and press OK if you would like to return to the previous screen. Connected Sources Displays connected USB devices.
6 Folder Contents Back Button Highlight this button and press OK if you would like to return to the previous screen. Connected Sources Displays connected USB devices. VIZIO Photo Current Folder Displays the folder path. This area displays the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote. VIZIO_2GB\Photo\root USB1: Current Folder root Start Fullscreen Slideshow A.jpg B.jpg C.jpg D.jpg E.jpg F.jpg H.jpg I.
Using VIZIO Internet Apps Plus® (V.I.A. Plus) LIST MENU 7 EXIT VIZIO Internet Apps Plus® (V.I.A. Plus) delivers popular online content to your TV. V.I.A. features a selection of Apps that allow you to watch movies and TV shows, listen to music, get weather and news information, and more–all on demand. Using the Hot Keys Use the following colored buttons on the remote to perform common V.I.A. tasks: BACK GUIDE • Yellow - Not used.
7 USING THE FULLSCREEN V.I.A. APPS WINDOW 3. Press the OK button on the remote to launch the App. The fullscreen V.I.A. apps window allows you to add and store apps. The Apps on the first page are displayed in the Dock and Apps on additional pages can be moved to the Dock. 4. To exit from an open App or to close the App Dock, press the Exit button on the remote. To open the Fullscreen V.I.A. Plus Apps Window: 1. Press the V Button on the remote twice. 2.
7 FULLSCREEN V.I.A. PLUS APPS WINDOW OVERVIEW The Fullscreen V.I.A. Plus Apps window allows you to add, delete and organize your Apps. The My Apps tab displays Apps that are already installed on your TV. The Apps on the first page are displayed in the V.I.A. Plus App Dock. Apps with a small lock icon in the right-hand corner cannot be deleted. • All Apps: Displays every app that is available for download.
7 CUSTOMIZING THE V.I.A. APPS WINDOW Deleting an App from the My Apps Tab You can add, delete, and move apps around on your My Apps tab for a custom look and feel. Adding an App to the My Apps Tab To delete an app from your TV: 1. Use the Arrow buttons on the remote to highlight the App you wish to delete. 2. Press and hold the OK button. The following options appear: To add an app to your TV: 1. Use the Arrow buttons on the remote to highlight the app you wish to add.
7 Moving an App in My Apps You can organize your Apps on your My Apps tab by moving them where you want. To move the Apps on your My Apps tab: 3. Use the Arrow buttons to move the App to the desired location and press OK to place the app.When you can move the app, it appears as shown below. App location, appearance, and availability subject to change without notice. 1. Use the Arrow buttons on the remote to highlight the App you wish to move. 2. Press and hold the OK button.
Troubleshooting & Technical Support A DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: Email: Web: (877) 878-4946 (TOLL-FREE) techsupport@VIZIO.com www.VIZIO.
A There is no sound. • Press Volume Up on the remote control. The remote is not responding. • Make sure the batteries are properly inserted matching the - and + symbols. • Replace the batteries with fresh ones. • Reset the remote: Press and hold the Fast-Forward and Enter buttons for 10 seconds. The TV displays “No Signal.” • Press the INPUT button on the remote control to select a different input source. • • Press the Power/Standby button on the remote or on the back of the TV to turn the TV on.
A I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. The image quality is not good. • For the best image quality, view high-definition programs using digital sources. Connect your devices with HDMI cables. • If you are using an antenna, the signal strength of the channel may be low.
B Specifications M321i-A2 M471i-A2 32” Class 47” Class 31.50” 46.96” 28.61” x 18.82” x 7.46” 28.61” x 17.08” x 1.95” 41.93” x 26.54” x 8.54” 41.93” x 24.65” x 1.75” 18.53 lbs 14.34 lbs 38.14 lbs 33.66 lbs LED LED Refresh Rate: 120 Hz 120 Hz Maximum Resolution: 1080P 1080P 0.363 mm (H) x 0.363 mm (V) 0.180 mm (H) x 0.541 mm (V) 10,000,000:1 10,000,000:1 Response Time: 6.
B M321i-A2 M471i-A2 Audio Outputs: RCA Analog Stereo Output, Optical Digital RCA Analog Stereo Output, Optical Digital OSD Language: English, Spanish, French English, Spanish, French Yes Yes XRT510 XRT510 Certifications: UL, FCC Class B, HDMI 1.4, Dolby Digital Plus UL, FCC Class B, HDMI 1.4, Dolby Digital Plus Compliance: Energy Star Energy Star 120V @ 60 Hz 120V @ 60 Hz 27.57W 57.
C Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
D Legal & Compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
D VIZIO Internet Applications Disclaimer VIZIO SOFTWARE LICENSE AGREEMENT VIZIO Internet Applications (“VIA”) affords the opportunity to access third party Internet product offerings or services (“VIA Services”) on certain VIZIO TVs. The VIA Services accessible herein are provided as per our agreement with these third parties. These agreements are subject to change, interruption, suspension (including termination) at any time and for various reasons.
D related information, including but not limited to information about your use of the VIZIO Software, the VIA Services, content viewed and attached peripherals, products or services purchased, that is gathered periodically to facilitate the provision of software updates, product support and other services to you, including additional or different VIA Services related to the VIZIO Software and to verify compliance with the terms of this License Agreement.
D AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY BY JURISDICTION. 11. Disclaimer of Warranties. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE VIZIO SOFTWARE AND VIA SERVICES (AS DEFINED ABOVE) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU.
© 2013 VIZIO INC. ALL RIGHTS RESERVED.
