User Manual

VXS-9075R
INSTALLATION GUIDE
PAGE 1 of 2
BEFORE BEGINNING YOUR INSTALLATION
Read through the entire instruction guide before getting started with the installation. Professional installation is
recommended for this product.
CONTENTS
 120V Industrial Electric Motor Siren (Red)
SAFETY INSTRUCTIONS
 This product produces a very loud sound, hearing loss or permanent damage may result from improper use.
 Do not operate in a closed environment or near pedestrians.
 Do not connect the siren to any power source other than that specified above.
 Employ equipment for eye protection during drilling operations.
 Do not connect if supply wires are energized.
MOUNTING
 Identify a suitable area for mounting, preferably an unobstructed steady surface like a pole. Do not attach the
siren to a flexible material.
 Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a
drill.
 Secure the siren to the surface using four screws (not provided).
The specific voltage requirement for this siren is 110-120 volt AC. Therefore installation must be
done with an AC power source of 110-120 volts.