Quick Installation Guide

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: [phone]| F: [phone]| E: [e-mail]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T : 408-773-8686 | F : 408-773-8298 | E : [e-mail]
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T: [phone] E: [e-mail]
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 280W.
AW-GEV-184B-250 PoE Switch
Quick Installation Guide
The AW-GEV-184B-250 is a 16 port 10/100/1000BaseT web smart PoE switch capable of feeding 15.4/30W (54V max.
per port) power to Power over Ethernet (PoE) devices. It provides a reliable infrastructure for your business network and
deliver intellilgent features. Moreover, this switch also comes with the functionality specically designed for managing
VIVOTEK's IP cameras and for a quick access to connected devices.
IMPORTANT
:
INTRODUCTION
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)
* 1x CD-ROM
PACKAGE CONTENTS
Front Panel Rear Panel
All specications are subject to change without noice.
Copyright © 2016 VIVOTEK INC. All rights reserved.
IP Address
DHCP client
User name
admin
Password
admin
DEFAULTS
Mode/Reset Button
Task Press time System LED Behavior Port Status LED Behavior
Change LED Mode 0 ~ 2 seconds Green ON LED status will be changed according to the mode
selected
Restart 2 ~ 7 seconds Green blinking All LEDs are off
Restore defaults 7 ~ 12 seconds Green blinking All LEDs stay ON
LED DEFINITIONS
System
Green ON Power is on and normal.
Green Off The switch is not receiving power.
Red ON An abnormal state, such as exceeding operation temperature, has been detected in the switch.
Link/Act/Speed
Green ON The port Status LEDs displaying link status, network activities, and speed on each port.
PoE
Green ON The RJ45 port status LEDs display PoE powering statuses on each port.
RJ45 ports
SFP ports
Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Amber ON Port is enabled and link established with a device at the 100Mbps speed.
Amber Blinking Port is transmitting and receiving data at the 100Mbps speed.
PoE Mode
RJ45 ports
Green ON Port is enabled and supplying power to PD.
Amber ON An abnormal state detected, such as overload.