ViVOpay Kiosk User Manual ViVOtech, Inc. 451 El Camino Real Santa Clara, CA 95050 Ph: (888) 363-3753 Email: info@vivotech.com www.vivotech.
FCC Regulatory Compliance Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Applying Power The ViVOpay Kiosk does not have a switch to turn on/off power. After connecting the cable from the Reader to the host apply power to the host and/or power supply. The Reader will perform a power-up sequence as follows: All LEDs will illuminate an internal self-test is being performed. The default RS-232 parameters (19,200 bps, 8 data, 1 stop, no parity) will be set.
1. What is MasterCard PayPass? How is it different from other MasterCard cards? The MasterCard PayPass card has built-in chip technology as well as a standard magnetic stripe. This enables the card to be used in the traditional manner at all MasterCard acceptance locations (over 30 million locations) by swiping the magnetic stripe. However, at PayPass-accepting retail locations, the cardholder can pay with one simple touch of the card.