ViVOpay™ VP6800 User Manual Rev. A Part Number 80159500-001 ID TECH 10721 Walker Street Cypress, CA 90630 (714) 761-6368 www.idtechproducts.com support@idtechproducts.
Copyright © 2018 ID TECH. All rights reserved. This document, as well as the software and hardware described in it, is furnished under license and may be used or copied online in accordance with the terms of such license. The content of this document is furnished for information use only, is subject to change without notice, and should not be construed as a commitment by ID TECH.
Table of Contents 1. OVERVIEW .......................................................................................................................................... 4 2. FEATURES ........................................................................................................................................... 4 3. SPECIFICATIONS .................................................................................................................................. 5 4.
1. Overview The all-new ViVOpay VP6800 by ID TECH is a state-of-the-art, 3-in-1 PCI PTS 5.x certified unattended payment device that can accept magstripe, chip card (EMV), and/or NFC/contactless payments. The unit features a 4.3-inch high-luminosity color touchscreen display, capable of supporting PIN-on-glass transactions, and can also display video advertisements when it is not being used for menu displays or customer interactions.
PCI PTS 5.x certified with SRED validation Connectivity interface – RS-232, USB 2.0 via micro-USB, Ethernet 10/100M, and optional WiFi/BLE RS-232 port for external peripherals 3.5mm audio jack Optional camera or 2D scanner Supports EVA standard external mounting Support for contactless loyalty kernels (Apple VAS, Google SmartTap 2.
IK Rating IK 08 IP Rating IP 65 Electrical Input Power +5VDC 1A, 3.5W (RS-232 requires external power supply) Screen Dimensions, pixels 480 (height) x 272 (width) Luminance/brightness 600 cd/m2 Touch Interface Type Capacitive Brightness 1000 nits (max) Video 60 fps (motion JPEG) 4.
6. Basic Operation When power is supplied, the VP6800 will boot automatically and illuminate within about 5 seconds. Use cable P/N 80159217-001. Plug the 12-pin Molex connector into the back of the VP6800, and supply 5VDC 1.44A power (via cannon connector at the powered DB9 connection) using an AC0005R-3 (R00111700108) or equivalent power supply. Optionally also connect a standard Ethernet cable between the RJ45 ports on the back of the VP6800 and the network port of the host system. 7.
. Troubleshooting Consult the ID TECH Knowledge Base at https://atlassian.idtechproducts.com/confluence/display/KB/Knowledge+Base+-+Home. 9. Firmware Reference The ViVOpay VP6800 uses ID TECH's NEO II firmware. For a comprehensive guide to the device's firmware-level commands, ask your ID TECH representative for the NEO II Serial Interface Developer's Guide (or IDG). It is available at no charge to customers on request. 10.
FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
