Instructions / Assembly

Put the Magnetic Center Cover on the front

of the Wheel.

Clean the wheel with dry cloth

Remove the small plastic screws which are

assembled on the wheel primarily at first.

Then insert the small screws into the holes

around the wheel and assemble them with

matched small nuts.

*The quantity of J K L P: one for the 12" prize wheel

two for the 24" prize wheel.

The quantity of M,N:15 for 12" and 24"

(one replacement)

A- G-

H-

I-

J-

K-

L-

M-

N-

O-

P-

B-

C-

D-

E-

F-

Thank You For Purchasing From

VIVOHOME

support@vivohome.com

www.vivohome.com

MADE IN CHINA

Align the Post into the groove of the

Base,and then attach them with two

Base Screws and matched Base

Washers & Base Wing Nuts.

Attach the Wheel to the Post with

Wheel Screw and matched Wheel

Washer & Wheel Wing Nut.

PAGE 1
Align the Post into the groove of the Base,and then attach them with two Base Screws and matched Base Washers & Base Wing Nuts. Remove the small plastic screws which are assembled on the wheel primarily at first. Then insert the small screws into the holes around the wheel and assemble them with matched small nuts. Attach the Wheel to the Post with Wheel Screw and matched Wheel Washer & Wheel Wing Nut. ABCDEF- GHIJKL- MN- (one replacement) Put the Magnetic Center Cover on the front of the Wheel.