Five Roller Electric Hot Dog Machine with Sanitation Hood Instruction Manual SKU: HOTDG-V205 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/hotdg-v205 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
WARNING: IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL SAFETY REQUIREMENTS KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE If you do not understand these directions, or if you have any doubts about the safety of the product, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper assembly may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
WARNING: ELECTRICAL SHOCK HAZARD. • KEEP WATER AND OTHER LIQUIDS AWAY FROM ENTERING INSIDE EQUIPMENT. FAILURE TO DO SO MAY RESULT IN A SHORT CIRCUIT OR AN ELECTRICAL SHOCK • DO NOT USE EQUIPMENT IF POWER CORD IS DAMAGED OR HAS BEEN MODIFIED. • MAKE SURE THAT YOUR UNIT PROPERLY GROUNDED. IF YOU DO NOT HAVE A GROUNDED OUTLET, CALL A QUALIFIED TECHNICIAN TO INSTALL. CAUTION: FOLLOW INSTRUCTIONS TO PREVENT INJURIES. • BURN HAZARD.
PRODUCT SPECIFICATIONS MODEL HOTDG-V205 MATERIAL STAINLESS STEEL DIMENSION 580 x 255 x 170mm HEATING POWER 700 W ELECTRIC VOLTAGE 110 V FREQUENCY 60 Hz TEMPERATURE SCOPE 32°F - 482°F ROLLER QUANTITY 5 PACKAGE CONTENTS A (x1) Hot Dog Roller B (x2) Front Glass Mount C (x2) Rear Glass Mount D (x2) Side Glass Panel F (x1) Glass Trim G (x1) Power Cable H (x1) Tongs I (x1) Drip Tray S-A (x4) M4x10 Screw S-B (x4) M4 Cap Nut E (x1) Top Glass Panel PRODUCT FUNCTION This equipment is only
PRODUCT STRUCTURE TOOLS NEEDED Glass Sanitation Cover Phillips Screwdriver Rollers Power Switch Drip Tray Back Heat Indicator Back Temperature Front Temperature Control Control Front Heat Indicator STEP 1 Add a small amount of vegetable oil on both ends of the rollers on Hot Dog Roller (A). This will allow the rollers to spin smoothly. Avoid using non-stick sprays.
STEP 2 Remove the four screws, two on each side, from the top inner area of the Hot Dog Roller (A). Place the Front Glass Mounts (B) and Rear Glass Mounts (C) onto the machine and reinsert the screw without tightening completely. B A C STEP 3 Insert Side Glass Panels (D) into Front and Rear Glass Mounts (B, C). Adjust Front and Rear Glass Mounts (B, C) to fit snug around Side Glass Panels (D) and tighten all four screws.
STEP 4 Insert Top Glass Panel (E) into Rear Glass Mounts (C). E C STEP 5 Place Glass Trim (F) on top of Top Glass Panel (E) making sure the holes on either end line up with the holes in the top corners of Side Glass Panels (D). Secure Glass Trim (F) using M4x10 Screws (S-A) and M4 Cap Nuts (S-B).
STEP 6 Plug Power Cable (G) into Hot Dog Roller (A) and flip the power switch to the ON position. G A STEP 7 Insert Drip Tray (I) into Hot Dog Roller (A). Turn temperature control to desired temperature setting for the front and/or back rollers. The heating indicator light will turn on while preheating and will turn off once heat reaches desired temperature setting. To avoid potential injury, use Tongs (H).
CARE & MAINTENANCE CLEANING TO MAINTAIN PRODUCT APPEARANCE AND LONGEVITY OF SERVICE, CLEAN EQUIPMENT AFTER EACH USE. CAUTION: ROLLERS WILL BE HOT. Allow hot surfaces to cool before handling to prevent burning skin. 1. Make sure power is off before cleaning rollers. 2. Use a clean, dry cloth to wipe rollers. 3. Use a damp cloth or sponge dipped with soapy water to wipe outside of equipment. 4. Dry thoroughly after cleaning. 5. Remove and clean grease tray. Place tray back into equipment when dry.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 08/18/2021 REV2.1 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com AVG.