User Manual

ManualsBrandsVIVO ManualsAccessoriesBlack Height Adjustable Pneumatic Spring Microphone Counterbalance Arm Mount, Compact Mic Stand with Mounting Clamp

Pneumatic Arm Microphone Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-mic01

SKU: STAND-MIC01

help@vivo-us.com www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

Summary of content (8 pages)

PAGE 1
Pneumatic Arm Microphone Desk Mount Instruction Manual SKU: STAND-MIC01 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-mic01 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
PAGE 2
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
PAGE 3
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. 5.95lbs (2.70kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 35-80mm 10-45mm OPTION A: Clamp Installation As delivered, the clamp (B) will fit a desktop thickness of 35-80mm. To fit a desk thickness of 10-45mm, remove the two bolts using the 6mm Allen wrench (L), then reassemble at alternate height. Attach decorative cover (C) to clamp (B). Attach pole (E) to clamp (B) with bolts (G) using 4mm allen wrench (K).
PAGE 4
STEP 1 (Continued) OPTION B: Grommet Base Installation Disassemble clamp (B) using 6mm Allen wrench (L). Remove the screw, washer and clamp plate from the clamp, then remove the hand bolt. If desk does not have an existing grommet hole, drill a 3/8” (10mm) hole through the desktop. Place grommet plate (H) onto the hand bolt, then secure the pole (E) and grommet base (I) to the desktop using the hand bolt and grommet plate. Slide on decorative cover (C).
PAGE 5
STEP 3 Screw mic clamp (D) onto arm (A) and adjust using 3mm Allen wrench (J). D J STEP 4 Place mic into mic clamp (D). Manage cable as shown using covers on arm (A) and cable clip (F).
PAGE 6
STEP 5 Adjust gas spring tension if needed by turning screw on top of center joint with 6mm Allen wrench (L).
PAGE 7
Adjust as Desired ±180 ° ±90 ° +90 ° ±180 ° -90° ±135 ° 7
PAGE 8
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 03/06/2020 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. help@vivo-us.com AVG.