User Manual

ManualsBrandsVIVO ManualsElectronicsTV Wall Mount for 13 to 42 inch LCD LED Plasma Screens, Fully Articulating VESA Stand Bracket

TV Wall Mount 75x75mm to 200x200mm

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-vw01

SKU: MOUNT-VW01

help@vivo-us.com www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

Summary of content (8 pages)

PAGE 1
TV Wall Mount 75x75mm to 200x200mm Instruction Manual SKU: MOUNT-VW01 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vw01 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
PAGE 2
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
PAGE 3
ASSEMBLY STEPS STEP 1 OPTION A: Wood Ceiling Use mount (A) to mark mounting holes on wall where stud is located. Using a 3/16” bit, drill approximately 2.2” into marked locations. Secure mount (A) to wall using bolts (W-A) and washers (W-C). OPTION B: Concrete Ceiling Use mount (A) to mark mounting holes on wall. Using a 3/8” bit, drill approximately 2.4” into marked locations. Secure mount (A) to wall using anchors (W-B) bolts (W-A) and washers (W-C).
PAGE 4
STEP 2 Attach plastic cover to mount (A). STEP 3 Attach cable management clip (F) as shown in diagram.
PAGE 5
STEP 4 Mount VESA adapters (C) and (D) to VESA plate (B) using bolts (J) and nuts (I) in the appropriate configuration to match your televisions mounting holes.
PAGE 6
STEP 5 After placing TV on a flat surface, mount VESA plate (B) to back using bolts (M-A, M-B, or M-C) and washers (M-E or M-F). If bolts are too long, spacers (M-G) may be required.
PAGE 7
STEP 6 Attach TV to mount (A) using nuts (E) as shown in diagram. STEP 7 Adjust mount (A) using allen wrench (G) and wrench (H).
PAGE 8
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 03/05/2020 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. help@vivo-us.com AVG.