Black Projector Ceiling Mount Instruction Manual SKU: MOUNT-VP02B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vp02b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. Drill 30lbs (13.61kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 OPTION A: Run cables through arm (A). A OPTION B: If running cables through ceiling, pull cables through top plate of arm (A).
STEP 2 OPTION A: Drywall Mounting Use top plate of arm (A) to mark mounting holes on ceiling. Using a 3/16” drill bit, drill approximately 2.2” into ceiling stud. Put arm (A) in place and mount to the pre-drilled holes using bolts (W-A) and washers (W-C) as shown in diagram.
STEP 2 (Continued) OPTION B: Concrete/Brick Mounting Use top plate of arm (A) to mark mounting holes on ceiling. Using a ⅜” drill bit, drill approximately 2.4” into ceiling. Use concrete anchors (W-B), bolts (W-A), and washers (W-C) to mount the arm (A) as shown in diagram.
STEP 3 Mount bracket (B) to arm (A) using spacers (M-L), plates (M-M), bolts (M-I), and washers (M-J, M-K). Tighten using allen key (M-N). M-M M-L M-J M-K M-I M-N M-M M-L B STEP 4 Adjust arms of the bracket (C) to fit the mounting holes of your projector. Use bolts (M-A, M-B, M-C, M-D) and washers (M-E, M-F, M-G, M-H) depending on the size of mounting holes in your projector.
STEP 5 Hook the mount (B) to bolts in bottom of mount (A). Secure using bolts (M-I) and washers (M-J, M-K) as shown in diagram. Tighten using allen key (M-N). M-J M-I M-K STEP 6 Adjust height and tilt of mount using allen key (M-N).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 03/05/2020 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. help@vivo-us.com AVG.