Installation Manual

ManualsBrandsVIVO ManualsAccessories & SuppliesAdjustable Ceiling Projector Theater Mount, White

Table Of Contents

Projector Ceiling Mount

Instruction Manual

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371-5654

-Model: MOUNT VP01W

- M G (x4)

D5Ø5xØ12

Package Contents

Tools Required:

electric drill, phillips screwdriver

Scan the QR code with your mobile device or follow

the link to helpful videos and specifications related to

this product.

A (x1) B (x1)

- M A (x4)

M3x8

- M B (x4)

M4x10

- M C (x4)

M5x10

- M D (x4)

M6x10

- M E (x4)

- M F (x4)

- M H (x4)

- M I (x2)

M5x12

- M J (x2)

D5Ø5xØ10

- M L (x1)- M K (x2)

- W A (x4) - W B (x4) - W C (x4)

- -https://vivo us.com/products/mount vp01w

Summary of content (4 pages)

PAGE 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vp01w Tools Required: electric drill, phillips screwdriver Package Contents Projector Ceiling Mount Instruction Manual A (x1) M-A (x4) M3x8 M-E (x4) D3 Model: MOUNT-VP01W Email: help@vivo-us.com Live chat: www.vivo-us.
PAGE 2
Assembly Steps Step 1: OPTION A Step 2: OPTION A: Wood stud ceiling installation Align holes in ceiling plate with wood stud and mark drilling locations. Use of a stud finder is recommended for finished ceilings. Drill 55mm (2.2”) deep holes using 4.5mm or 3/16” drill bit. If cables will be hidden above the ceiling, route cables through large opening in the ceiling plate of part A ceiling mount. - OR Step 1: OPTION B Mount ceiling plate to stud using W-A screws with W-C washers.
PAGE 3
Step 2: OPTION B: Concrete ceiling installation Mark drilling locations in ceiling. Drill 60mm (2.4”) deep holes using 10mm or 3/8” drill bit. Step 3: Align arms on part B mounting plate with mounting holes in projector, and mount to projector using screws and washers most appropriate for your projector. If your projector has 3 mounting holes, simply remove one of the arms. Press W-B concrete anchors into drilled holes, and mount ceiling plate to ceiling using W-A screws and W-C washers.
PAGE 4
Step 5: Secure mounting plate using M-I screws (M5x12), M-J metal washers and M-K plastic washers. Tighten with M-L Allen wrench. Safety Warning If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.