Flip Down Ceiling TV and Monitor Mount Instruction Manual SKU: MOUNT-M-FD27 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-m-fd27 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
ASSEMBLY STEPS STEP 1 Remove bolts connecting VESA plate to mount (A) using 4mm Allen wrench (B). B STEP 2 Push arm against ceiling plate of mount (A) to release lock and pull the arm down.
STEP 3 OPTION A: Wood Beam Ceiling Hold mount (A) to mounting surface and mark drill holes with pencil. Drill 2.2” (55mm) deep holes using a 3/16” (4.5mm) drill bit. Insert screw (W-A) into front hole, leaving 3mm of thread exposed. Slide mount onto front screw. Insert screw (W-A) with washer (W-C) into back hole. Tighten all screws. W-A W-C W-A OPTION B: Concrete Ceiling Hold mount (A) to mounting surface and mark drill holes with pencil. Drill 2.4” (60mm) deep holes using a 3/8” (10mm) drill bit.
STEP 3 (Continued) OPTION B: Concrete Ceiling Slide mount onto front two screws. Insert screws (W-A) with washer (W-C) into back two holes. Tighten all screws. W-C W-A STEP 4 With TV laying face down on a flat surface, place VESA plate on back. Make sure arrow is pointing towards the top of the TV. Secure VESA plate in place using bolts (M-A/M-B) and washers (M-C). Tighten using a Philips head screwdriver.
STEP 5 Slide VESA plate with TV onto mount (A), making sure slots in plate are engaged with hooks on mount. Replace screws removed in Step 1 using 4mm allen wrench (B).
STEP 6 Adjust swivel hinge by removing plastic caps and turning bolts underneath with 6mm Allen wrench (C). Adjust TV height by loosening bolts with 4mm Allen wrench (B), then tighten at desired height. B STEP 7 Push the TV all the way up to the ceiling to engage the lock, securing the TV in the raised position. Push up again to disengage the lock and lower the TV.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 03/05/2020 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. help@vivo-us.com AVG.