ViviCam S124 Digital Camera User Manual © 2009-2013 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
TABLE OF CONTENTS Introduction .................................................................................................................................. 2 What’s Included ............................................................................................................................ 2 Parts of the Camera ..................................................................................................................... 3 Initial Camera Setup ...........................................
Introduction Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Note: Your digital camcorder needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. This camera is a plug and play device.
Parts of the Camera 1. Power Button 12. ViviLink / Down Button 2. Shutter Button 13. Microphone 3. LCD Screen 14. Flash Light 4. Self-Timer LED 15. USB Slot 5. Zoom Out 16. Tripod Mount 6. Zoom In 17. Digital Lens 7. MODE Button 18. Battery Compartment 8. SET Button 19. SD Memory Card Slot 9. Scene / Left Button 20. MACRO Switch 10. Flash / Up / Slideshow Button 21. Wrist Strap Connector 11. Delete / Right Button 22. Buzzer 23.
Initial Camera Setup INSTALLING THE BATTERIES INSTALLING THE MEMORY CARD Insert 3 AAA (1.5V) batteries. Alkaline batteries recommended (not included). TURNING ON THE CAMERA SD Memory card (up to 32GB) needed for normal use.
POWERING THE CAMERA ON BATTERIES Make sure the batteries have been inserted properly into your digital camera, according to the polarity shown inside the battery compartment. Use 3 x AAA (1.5V) batteries. Alkaline batteries are recommended. (Batteries not included.) Note: Remove the batteries from the camera when not in use for an extended period. Do not mix alkaline and non-alkaline batteries. Some features, such as Flash, will not work if the battery power level is low.
Note: After the camera is powered on, an SD icon appears on the LCD display. If you do not see the SD icon on the display, please check if the card was inserted properly. Make sure the SD card is not locked (check the lock switch on the side of the SD card). If the SD card is locked this will prevent the camera from saving captured photos to the SD card. POWER ON Press the POWER button to turn on the digital camera.
direction control buttons. Then press the SET button to confirm the selection. 2) After selecting a language, you will be asked if you would like to continue with the initial camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to continue or “No” to exit the setup. Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default settings. These settings can be adjusted at any time manually through the menus in the camera.
Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the Shutter button. The picture is automatically saved to your camera’s memory card.
Camera Technical Specifications Image Sensor CMOS Image Resolution 4608 x 3456 (16M), 4416 x 3312 (14M), 4000 x 3000 (12M), 3648 x 2736 (10M), 3264 x 2448 (8M), 3648 x 2048 (7M-HD), 2592 x 1944 (5M), 2048 x1536 (3M), 1920 x 1080 (2M-HD), 640 x 480 (VGA) Video Resolution 1280 x 720 (720P), 640x480 (VGA), 320x240 (QVGA) File Format JPEG (Photo); AVI (Video) Internal Memory 1 Test Photo Use Only External Memory SD Card (up to 32GB) LCD Display 2.7 Inch TFT, LCD Swivel 180 Lens f=7.
Computer System Requirements To be able to download photos and videos to your computer using the Vivitar Experience™ Image Manager Software, you will need the following minimum configuration: WINDOWS OS MICROSOFT® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or MICROSOFT® Windows 7 or above Pentium® 4 processor (or above) 1 GB RAM, 250 MB available hard disk space 16-bit Color monitor, 1024 X 768 recommended screen resolution CD-ROM Drive QuickTime® 6 or higher
Powering the Camera On/Off Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use. Make sure an SD card has been inserted into your camera. (SD card up to 32GB - SD Card not included) Please see Initial Camera Setup for more information. POWERING THE CAMERA ON Press the Power button to turn your camera ON.
Changing Camera Mode Your camera has three main modes: 1) Photo Capture Mode - Use this mode to capture photos with your camera. 2) Video Capture Mode - Use this mode to capture videos with your camera. 3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have already taken with your camera. When the camera is first powered ON, the Photo Capture Mode is automatically active.
Navigating the Menus Each camera mode has a set of menus specific to that mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll between the various menus for the current mode. 3) Press the UP or DOWN button to highlight the desired menu selection. 4) Press the SET button to confirm and save the highlighted menu option. 5) If the selection can be remembered by the camera, a selection icon appears to the right of the selected menu option.
VIVILINK: VIDEO OR PHOTO CAPTURE MODE Press the DOWN Quick Function Button to open the ViviLink options. Select a ViviLink option and press SET to save your selection and return to Photo/Video Capture Mode. Your selected ViviLink destination appears as an icon on the LCD screen and your camera is now ready to capture your photo or video with the selected ViviLink destination. Note: The ViviLink feature is deactivated by default and needs to be activated prior to capturing each photo or video.
Flash Type Forced Off (Default) Description No flash will appear. Use this when you do not want to activate Flash. NOTE: A ‘Turn On Flash’ message appears when the camera detects a need for flash. When this message appears, it is recommended to press the Flash/Up button and select one of the flash options: Auto Flash, Forced On or Red-Eye Reduction. The flash is enabled for each photo.
When enabled, the MACRO mode allows your camera to focus on an object that is close to the camera. The flower icon appears on the LCD and indicates that the Macro mode is ON. MACRO OFF: To turn the MACRO mode OFF Slide the MACRO Switch on the side of the camera DOWN to the mountain The mountain icon. icon appears on the LCD display. When MACRO mode is off, images can be captured from 1.5m - ∞ (infinity).
Photo Capture Mode The Photo Capture Mode allows you to capture pictures with your digital camera. This is the default mode of the camera once it has been powered on. TAKING A PICTURE 1) Selecting the Scene with the LCD Display: While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. 2) Zoom Options: Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.
TAKING A SELF PORTRAIT PICTURE You can also capture your photos using the flip screen which opens to 180 degrees. 1) Before taking the photo, ensure that the MACRO Switch on the side of the camera is UP and in the ON position 2) . The flower icon appears on the LCD display. When you would like to quickly include yourself in the photo, simply flip the LCD display up and hold the camera steady facing towards you at arm’s length (30~45cm). 3) Make sure you can see yourself on the LCD screen.
PHOTO CAPTURE MODE QUICK FUNCTION BUTTONS Your digital camera has a four-directional pad that functions as Quick Function buttons: Quick Function Function Button LEFT UP SCENE SELECTION – Opens the ‘Scene’ menu. FLASH OPTIONS – Toggles between the following Flash options: Forced Off, RIGHT Forced On, A Auto Flash, Red Eye Reduction DELETE – Opens the ‘Delete This Photo’ option and allows you to view and delete the last photo taken. DOWN VIVILINK – Opens the ‘ViviLink for Photos’ menu.
PHOTO CAPTURE MODE MENUS The following are the menus that appear in your camera’s Photo Capture Mode. The selection icon appears by the default settings. Once you change a setting, the setting is saved by your camera until you manually change the setting or restore the camera’s default factory settings.
SCENE MENU The ‘Scene’ menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the FLASH automatically (if it’s ON) to optimize the picture quality. If however, you would like to override it and manually turn ON the flash – you can do so. Remember: The ‘Scene’ menu is also accessible by pressing the LEFT Quick Function Button while in Capture Mode.
5) To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. IMAGE QUALITY MENU The ‘Image Quality’ menu allows you to select the desired quality level of the images taken by your camera.
2) Press the LEFT or RIGHT button to scroll and select the ‘Self Timer’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode.
Note: To properly use the Face Detect option, please ensure the following: MACRO Mode OFF – Face Detect will not work if the camera is in Macro mode. Anti-Shake – Ensure that the Anti-Shake option is set to ‘On’. The Anti-Shake option is ‘On’ by default when you start using your camera and assists you in properly focusing the image. Distance from the camera – The subject’s face must be no further than 8 to 9 feet (3.
3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen.
COLOR EFFECT MENU The ‘Color Effect’ menu allows you to choose a color effect to add to the images taken with your camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Color Effect’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item.
LIGHT EXPOSURE MENU The ‘Light Exposure’ setting helps you control the amount of light that enters your camera’s lens. This setting should be adjusted when the environment is lighter or darker than normal. When the environment has more light than is needed, reduce the exposure setting (by using the negative - count) to reduce the amount of light allowed into the lens by your camera.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. METERING MENU The ‘Metering’ setting will affect how your camera focuses when capturing an image.
LANGUAGE MENU You can select your camera’s language setting by selecting the desired language from the ‘Language’ menu. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Language’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item.
6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. To Set the Date and Time: 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu. 3) Press the UP or DOWN button to highlight the ‘Date Setup’ menu option, then press the SET button to select the option. 4) The ‘Date Setup’ submenu will open. 5) Scroll through the window with the RIGHT and LEFT buttons.
AUTO POWER OFF MENU You can use the ‘Auto Power Off’ feature in order to conserve you camera’s battery life. The designated time represents when your camera will automatically power off. When the camera sits idle for the designated period of time, the camera will shut off completely and will need to be powered on again with the power button before the next use. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Auto Power Off’ menu.
FORMAT MEMORY CARD MENU You can use the ‘Format Memory Card’ menu to delete all of the content that is currently on your camera’s memory card. Keep in mind that formatting the memory card will permanently delete all of the content on your camera’s memory card. This option will delete all of the content at one time. If you would like to delete individual images, use the delete menu in the camera’s Playback mode. Note: Restoring factory defaults or formatting the camera may result in the loss of data.
• Select ‘No’ to exit the menu and return to the previous mode without resetting to the default settings. • Select ‘Yes’ and press the SET button to proceed with the reset. You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings. Note: After RESETTING to the default settings, it is recommended to select your system Language, Date/Time and ViviLink for Photos and Videos.
Photo Playback Mode The Playback Mode allows you to review and edit photos and videos that you’ve already taken with your camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE button twice to open the Playback Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
THUMBNAIL VIEW Easily navigate and select the image you wish to view by using the Thumbnail View. The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to scroll and select images from the thumbnails. To access the Thumbnail View: 1) Press the W / Zoom Out / button. All the images on your camera appear in the Thumbnail View. 2) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you wish to view.
SAVE SELECTION - Saves your selected menu option. To navigate through the Menus, press the UP/DOWN/LEFT/RIGHT direction control buttons. Video Capture Mode and Playback Mode. MODE Exits the menu screen. ZOOM - Zooms In to selected photo. T / MODE SELECTION - Toggles between the Photo Capture Mode, W ZOOM - Zooms Out of selected photo. THUMBNAIL - Opens Thumbnail View. To navigate in the Thumbnail View press the UP/DOWN/LEFT/RIGHT direction buttons.
DELETE MENU While in the Playback Mode, you can delete pictures from your camera through the ‘Delete’ menu. 1) Select the photo you would like to delete. 2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘Delete’ menu. 4) Press the UP or DOWN button to highlight a specific option. To delete the selected photo: Select “Delete This Photo?” and press the SET button. You will be asked to confirm the deletion of the photo.
VIVILINK FOR PHOTOS MENU The ViviLink technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Vivitar Experience™ Image Manager application. 1) Select the photo you to which you would like to add a ViviLink. 2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘ViviLink’ menu. 4) Press the UP or DOWN button to highlight a specific option.
5) Press the SET button to confirm and select the highlighted menu option. 6) The selected picture now appears rotated in the Playback Mode display. CROP IMAGE MENU You can crop any picture on your camera with the Crop feature. 1) View the photo you would like to crop. 2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘Crop’ menu. 4) Press the UP or DOWN button to highlight the ‘Crop’ option.
then press the SET button. The image now appears in Playback Mode with the lock icon . To Unlock the Selected Image: To unlock the selected locked image use the UP or DOWN button to highlight ‘Unlock This Photo’ and then press the SET button. The image now appears in Playback Mode without the lock icon. To Lock All Images: To lock all captured videos and photos use the UP or DOWN button to highlight ‘Lock All Images’ and then press the SET button.
the printer. 8) Once connected, follow the instructions on the printer to proceed with the printing process. 9) Select the ‘Cancel’ option to exit the menu and return to the previous mode. SLIDE SHOW MENU You can view a Slide Show of all the pictures taken with your camera by pressing the UP Quick Function button while in Playback mode. The ‘Slide Show’ menu allows you to set the interval length of time that each picture will display during the slide show.
Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button once to access the Video Capture Mode. TAKING A VIDEO 1) Selecting the Scene with the LCD Display: While in Video Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture.
Note: Before taking the video, ensure that the MACRO Switch on the side of the camera is up and in the ON position . The flower icon will appear on the LCD display. Videos using the Flip screen without MACRO mode ON may not be properly focused. VIDEO CAPTURE MODE QUICK FUNCTION BUTTONS Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Function LEFT SCENE SELECTION – Opens the ‘Scene’ menu.
VIDEO CAPTURE MODE MENUS The following are the menus that appear in your camera’s Video Capture Mode: The Once you change a setting, the setting is saved by your camera until you manually change the selection icon appears by the default settings. setting or restore the camera’s default factory settings.
SCENE MENU The ‘Scene’ menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: Remember: The ‘Scene’ menu is also accessible by pressing the LEFT Quick Function Button while in Capture Mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Scene’ menu. 3) Press the UP or DOWN button to highlight a specific option.
6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. IMAGE QUALITY MENU The ‘Image Quality’ menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. COLOR EFFECT MENU The ‘Color Effect’ menu allows you to choose a color effect to add to the images taken with your camera.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. LIGHT EXPOSURE MENU The ‘Light Exposure’ setting helps you control the amount of light that enters your camera’s lens.
be more sensitive to light and allow you to capture images in lower-light situations. The higher sensitivity to light however, may reduce the quality of the images that are taken. When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will optimize the image quality in environments with bright lighting. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘ISO’ menu.
4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen.
To Enable/Disable the Timestamp: 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item.
1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Auto Power Off’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item.
FORMAT MEMORY CARD MENU You can use the ‘Format Memory Card’ menu to delete all of the content that is currently on your camera’s memory card. Keep in mind that formatting the memory card will permanently delete all of the content on your camera’s memory card. This option will delete all of the content at one time. If you would like to delete individual images, use the delete menu in the camera’s Playback mode. Note: Restoring factory defaults or formatting the camera may result in the loss of data.
• Select ‘No’ to exit the menu and return to the previous mode without resetting to the default settings. • Select ‘Yes’ and press the SET button to proceed with the reset. You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings. Note: After RESETTING to the default settings, it is recommended to select your system Language, Date/Time and ViviLink for Photos and Videos.
Video Playback Mode The Playback Mode allows you to review and edit photos and videos that you’ve already taken with your camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE button twice to open the Playback Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
To access the Thumbnail View: 1) Press the W / Zoom Out / button. All the images on your camera appear in the Thumbnail View. 2) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you wish to view. 3) Press the SET button to enlarge the selected image full size. 4) Once the selected video is full size you can play and view the video. VIDEO PLAYBACK MODE QUICK FUNCTION BUTTONS Your digital camera has a four-directional pad that functions as Quick Function buttons.
VIDEO PLAYBACK MODE MENUS The following are the menus that appear in your camera’s Video Playback Mode: DELETE MENU While in the Playback Mode, you can delete videos from your camera through the ‘Delete’ menu. 1) Select the video you would like to delete. 2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘Delete’ menu. 4) Press the UP or DOWN button to highlight a specific option.
Remember: All images will be deleted except images that are Protected/Locked. To delete a locked image, first unlock the image, then select delete. If you do not want to delete all of your videos and photos, select ‘No’ and press the SET button. All images will remain on your SD card and you will exit the menu and return to the Playback mode.
PROTECT/LOCK MENU Pictures and videos taken with your camera can be protected or “locked” to prevent any deletion or alteration being made to the files. 1) View the video you would like to protect/lock. 2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘Protect/Lock’ menu. 4) Press the UP or DOWN button to highlight a specific option.
Installing the Software You must be connected to the Internet to install and run the Vivitar Experience™ Image Manager software. 1) Insert the installation CD into your CD-ROM drive. The installation screen should automatically open. 2) WINDOWS: The Vivitar Experience™ Image Manager Installer window appears. If the window does not appear, open the application’s CD/DVD drive and click on “Setup.exe” to launch the installer.
Note: If you do not have Internet access, you can still download media from the camera. Click the “How to transfer photos and videos from my camera to my computer” button for instructions. 4) If you have Internet access, the “Choose your language” window opens. Choose your language and click “Next” to open the next window. 5) Select your camera model from the list and click “Next” to open the next window. 6) Click “Next” to confirm your camera model selection and to install the application.
Getting Photos and Videos from the Camera to the Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. 1) Select the “Get Images” button from the Main menu. 2) The “Get media from device” window opens. 3) You can select to download photos, videos or both. 4) Select your camera (removable disk) from the device window.
Getting Started! Using the Vivitar Experience™ Image Manager you can: Upload and manage photos and videos to and from the most popular photo sharing and social networking sites - Facebook, Flickr, Picasa, MySpace, Photobucket, Twitter and YouTube Seamlessly transfer photos and videos from one social network to another Organize your images by creating offline and online albums Edit images using automatic and manual tools Use automatic “Geotagging” with built in Google Maps For more detail
TRANSFERRING PHOTOS AND VIDEOS: MACINTOSH OS 1) Use the supplied USB cable to connect your camera to your computer. 2) ‘MSDC’ appears on the LCD. 3) The camera’s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and the folder inside to view the media files. 5) Select the files and drag them into your computer. Optionally, select the files and choose Copy from the Finder’s Edit menu. Then select a folder and choose Paste from the Edit menu.
Camera Maintenance The digital camera is a delicate device. Please handle your camera with care to avoid damaging it. Do not expose your camera to heat sources. Do not use you camera in wet or moist conditions. Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable.
Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ’s at the website. Can’t find what you are looking for? E-mail us at support@vivitar.com and one of our technical support team members will answer your questions. For phone support in the US please call 1-800-592-9541, in the UK call 0800 917 4831, in Australia call 1800-006-614. If you would like to call from anywhere else, please visit www.vivitar.